• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.37-48
• /
• 2014

Wireless mesh networks have emerged as a key technology in environment that needs wireless multi-hop communication without infrastructure and IEEE 802.11s mesh network standard have currently been established. One of big differences between this standard and the legacy IEEE 802.11 is that MCCA MAC is included to support QoS. MCCA supports bandwidth reservations between neighbors, so it can satisfy the QoS of bandwidth guarantee. However, MCCA has dis-advantages as follow; 1) it can not guarantee end-to-end bandwidth, 2) in multi-interface multi-channel wireless environments, the IEEE 802.11s does not provide a bandwidth reservation protocol and a wireless channel assignment etc. In this paper, we have proposed MIMC R-HWMP, which expands R-HWMP that was proposed in our previous work[3], to support multi-interface multi-channel. By simulation, we showed end-to-end bandwidth guarantee and the increase in the available bandwidth in multi-interface multi-channel wireless mesh networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1125-1134
• /
• 2011

In this paper a wideband frequency synthesizer is designed for DTV tuners using a $0.18{\mu}m$ CMOS process. It satisfies the DTV frequency band(48~1675MHz). A scheme is proposed to cover the full band using only one VCO and reliable broadband characteristics are achieved by reducing the variations of VCO gains and frequency steps. The simulation results show that the designed VCO has frequency range of 1.85~4.22GHz, phase noise at 4.22GHz of -89.7dBc/Hz@100kHz, gains of 62.4~95.8MHz/V(${\pm}21.0%$) and frequency steps of 22.9~47.9MHz(${\pm}35.3%$). The designed VCO has a phase noise of -89.75dBc/Hz at 100kHz offset. The designed synthesizer has a lock time less than $0.15{\mu}s$. The measured VCO tuning range is 2.05~3.4GHz. The frequency range is shifted down but still satisfy the target range owing to the design for enough margin. The designed circuit consumes 23~27mA from a 1.8V supply, and the chip size including PADs is $2.0mm{\times}1.5mm$.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.139-148
• /
• 2005

The desired level for multimedia services in the mobile web environment, the next generation web environment, is expected to be of PC level quality. And great efforts have been made in the development of hadware technology, communication technology, various kinds of services and standardization to support these services, In the mobile web environment, multimedia contents adaptation services should be available through supporting various kinds of devices, network abilities and users' preferences. It means that due to the variety of both desired devices' hardware specifications, called destinations, and desired QoSes, the QoSes in the destinations are not fixed or defined. If a new user wants to stream multimedia contents in a server through a new kind of terminal device, it should be considered whether the existing transcoders are able to adapt the multimedia contents. However, the existing libraries for multimedia adaptation have heavy transcoder figures which include all adaptive functions in one library, The challenge of universal access is too complex to be solved with these all in one solutions. Therefore, in this paper we propose an application independent multimedia adaptation framework which meets the QoS of new and varied mobile devices. This framework is composed of a group of unit transcoders having only one transcoding function respectively, Instead of heavy transcoders. Also, It includes the transcoder manager supporting the dynamic connections of the unit transcoders in order to satisfy end to end QoS.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.219-227
• /
• 2019

This study aims to examine Blockchain research trend using bibliometrics-based network analysis. The data were collected from WoS, Scopus, Korea Citation Index and National science & Technology Information Service, from 2009 to 2018. As results, the number of publications has started increasing rapidly from 2017 and it showed the initial stage of formation of coauthor network. Words often used in the title of the publications were related to application development, controversy and technology development. In addition, the majority of domestic papers are in the subject of social science, while international papers tend to focus on engineering issues. The results of the temporal analysis show that Korean researchers' block chain 3.0 started in 2017 and are rapidly increasing in 2018. The number of citations was associated with publication year in a statistically signifiant way. By examining these research trends, we hope that this paper can be a useful basis for the development of blockchain. Future research is expected to reveal more clearly the knowledge structure and characteristics of blockchain around the world.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.142-162
• /
• 2015

The purpose of this study are to provide the basic data materials and implementations for successful performance of electric-work field representatives of South Korean firms by identifying their roles and competency and examining their educational need. For this research purposes, three phased analysis was followed on: (1) the roles of electric-work field representatives, (2) competency of electric-work field representatives and (3) educational need for their competency. This research method was to conduct a focus group interview for 10 expert field representatives along with survey. The collected data materials were processed by MS Excel and SPSS 21.0 for statistical analysis including average, standard deviation and other basic statistics; the gap in awareness of field representatives; and need values. For the needs analysis, the difference between significance of field representatives' competency and current status was examined by t test. And the awareness gap between competency importance and current status was identified based on the Borich equation. The Locus for Focus model was employed herein to identify the kinds of competency with high importance and high inconsistency to prioritize. As a result, this research has found as follows: first, the roles of field representatives were found to be in 13 different kinds of roles. Second, electric-work field representatives were found to need to have 16 different skills. Third, regarding the 16 abilities, the gap between current status and significance was analyzed herein. The results showed statistically significant differences in all cases. The Borich needs analysis found the first required ability was communication ability followed by power of execution, conflict management ability, analytical thinking and time management ability. Also, the results of Locus for Focus model analysis displayed that the first quadrant(HH) included 7 highly-demanded abilities of communication ability, analytical thinking, decision making ability, specialty, time management ability, power of execution and drive for work implementation. The top-priority group was found to have 5 items of communication ability, analytical thinking, time management ability, power of execution and drive for work implementation which were commonly seen in the Locus for Focus model outcomes. Based on these findings, this research could identify the roles and competency of electric-work field representatives and provide the basic data materials applicable to future personal management of electricity companies including recruitment, division of work, job description, evaluation, etc. Also this research offered guidelines on demanded abilities in the field and where to place priority. The kinds of abilities with high educational demand as found in this research must be considered in designing educational programs for the competency building of field representatives. This research is expected to provide useful information in developing such educational programs for field representatives.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2007

Increase in the wireless mobile network users brings the issue of mobility management into the Virtual Private Network (VPN) services. We propose a provider edge (PE)-based provider provisioned mobile VPN mechanism, which enables efficient communication between a mobile VPN user and one or more correspondents located in different VPN sites. The proposed mechanism not only reduces the IPSec tunnel overhead at the mobile user node to the minimum, but also enables the traffic to be delivered through optimized paths among the (mobile) VPN users without incurring significant extra IPSec tunnel overhead regardless of the user's locations. The proposed architecture and protocols are based on the BGP/MPLS VPN technology that is defined in RFC24547. A service provider platform entity named PPVPN Network Server (PNS) is defined in order to extend the BGP/MPLS VPN service to the mobile users. Compared to the user- and CE-based mobile VPN mechanisms, the proposed mechanism requires less overhead with respect to the IPSec tunnel management. The simulation results also show that it outperforms the existing mobile VPN mechanisms with respect to the handoff latency and/or the end-to-end packet delay.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.348-357
• /
• 2007

Due to the improved performance and cost of personal mobile devices and rapid progress of wireless communication technology, the number of users who utilize these devices is increasing. This trend requires various types of services be available to users. So far, there have been many solutions provided for the shortest path problem. But, technologies which can offer various recommendation services to user depending on user’s current location are focused on Euclidean spaces rather than road network. Thus, in this paper, we extend the previous work to satisfy this requirement on road network database. Our proposed scheme requires pre-computation for the efficient query processing. In the preprocessing step, we first partition the input road network into a fixed number of Voronoi polygons and then pre-compute routing information for each polygon. In the meantime, we select the number of Voronoi polygons in proposition to the scale of road network. Through this selection, the required size of pre-computation is linearly increasing to the size of road network. Using this pre-computated information, we can process queries more quickly. Through experiments, we have shown that our proposed scheme can achieve excellent performance in terms of scheduling time and the number of visited nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2491-2499
• /
• 2015

Recently, the most popular technique to determine the Genotype, genetic features of individual organisms, is the GBS based on SNP from sequences determined by NGS. As analyzing the sequences by the GBS, TASSEL is the most used program to identify the genotypes. But, TASSEL has limitation that it uses only the partial sequences that is obtained by NGS. We tried to improve the efficiency in use of the sequences in order to solve the limitation. So, we constructed new data sets by quality checking, filtering the unused sequences with error rate below 0.1% and clipping the sequences considering the location of barcode and enzyme. As a result, approximately over 17% of the SNP detection efficiency was increased. In this paper, we suggest the method and the applied programs in order to detect more SNPs by using the disused sequences.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.2
• /
• pp.274-291
• /
• 2012

Since the advent of the internet as representative of the development of information communication technology (ICT), information transfer forms have changed rapidly these days. In the new techno-economic paradigms, I would ultimately consider how spatial structures of a knowledge-based service industry have been altered dynamically. To delve into this background, this study conducts an empirical case study of the internet advertising industry, particularly, among the whole advertising industry. Therefore, the primary objective of this study is to identify dynamic characteristics of spatial networks among actors for knowledge creation in Korea's internet advertising industry. In addition, it also is to analyze the formative elements of spatial networks which would have an influence on constructing the space of new economic activities. There are multilateral approaches. This research is classified into types of actors such as inter-firm, intra-firm, and firm-customer, and categorized according to spatial ranges such as local, regional, global levels. In the meanwhile, formative factors of the spatial networks could draw a conclusion from two aspects: inter-firm networks in the process of business in the internet advertising industry, and individual networks in the nonoccupational aspect. Accordingly, the results of this study suggest that actors' networks of two perspectives would make mutually complementary relationships and create new relational spaces in the digital economy.