• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.4
• /
• pp.235-243
• /
• 2021

River surveying is conducted to acquire basic geographic data for river master plans and various river maintenance, and it is also used to predict changes after river maintenance construction. ABL (Airborne Bathymetric LiDAR) system is a cutting-edge surveying technology that can simultaneously observe the water surface and river bed using a green laser, and has many advantages in river surveying. In order to use the ABL data for river surveying, it is prerequisite step to segment and extract the water surface and river bed points from the original point cloud data. In this study, point cloud segmentation was performed by applying the ground filtering technique, ATIN (Adaptive Triangular Irregular Network) to the ABL data and then, the water surface and riverbed point clouds were extracted sequentially. In the Gokgyocheon river area, Chungcheongnam-do, the experiment was conducted with the dataset obtained using the Leica Chiroptera 4X sensor. As a result of the study, the overall classification accuracy for the water surface and riverbed was 88.8%, and the Kappa coefficient was 0.825, confirming that the ABL data can be effectively used for river surveying.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2022

In order to efficiently analysis the stability of a slope, measuring the shear strength of soil is needed. The Standard Penetration Test (SPT) is not appropriate for a slope inspection due to cost and weights. One of the ways to effectively measure the N-value is the Dynamic Cone Penetration Test (DCPT). This study was performed to develop a minimized multi-function sensors that can easily estimate CPT values and Volumetric Water Content. N value with multi-fuction sensor DCPT showed -2.5 ~ +3.9% error compared with the SPT N value (reference value) in the field tests. Also, the developed multi-fuction sensor system was tested the correlation between the CPT test and the portable tester with indoor test. The test result showed 0.85 R2 value in soil, 0.83 in weathered soil, and 0.98 in mixed soil. As a result of the field test, the multi-function sensor shows the excellent field applicability of the proposed sensor system. After further research, it is expected that the portable multi-function sensor will be useful for general slope inspection.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.78-80
• /
• 2021

This study is based on Degree of Recognition and AHP surveys for experts, this study investigates changes in the demand of seafarers in response to changes in the shipping industry environment in which Maritime Autonomous Surface Ships(MASS) emerge according to the application of the fourth industrial revolution technology to ships, and it looks into changes in seafarers' skills. It also analyzes and proposes a plan for cultivating seafarers accordingly. As a result of Degree of Recognition and AHP analysis, it is analyzed that a new training system is required because the current training and education system may cover the job competencies of emergency response, caution and danger navigation, general sailing, cargo handling, seaworthiness maintenance, emergency response, and ship maintenance and management, but jobs such as remote control, monitoring diagnosis, device management capability, and big data analysis require competency for unmanned and shore based control.By evaluating the importance of change factors in the duties of seafarers in Maritime Autonomous Surface Ships, this study provides information on seafarers educational institutions response strategies for nurturing seafarers and prioritization of resource allocation, etc. The importance of factors was compared and evaluated to suggest changes in the duties of seafarers and methods of nurturing seafarers according to the introduction of Maritime Autonomous Surface Ships.It is expected that this study is meaningful as it systematically derived the duties and competency factors of seafarers of Maritime Autonomous Surface Ships from a practical point of view and analyzed the perception level of each relevant expert to diagnose expert-level responses to the introduction of Maritime Autonomous Surface Ships.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.421-429
• /
• 2000

In present, ATM integrated switching system has been developed to a mixed modules that complexed switching system including maintenance, operation based on B-ISDN/LAN service and plug-in module, , which runs on workstation computer system. Meanwhile, workstation has HMI operation system feature including file system management, time management, graphic processing, TMN agent function. The workstation has communicated with between ATM switching module and clients. This computer system architecture has much burden messages communication among processes or processor. These messages communication consume system resources which are socket, message queue, IO device files, regular files, and so on. Therefore, in this paper we proposed new performance modeling with this system architecture. We will analyze the system bottleneck and improve system performance. In addition, in the future, the system has many additional features should be migrated to workstation system, we need previously to evaluate system bottleneck and redesign it. In performance model, we use queueing network model and the simulation package is used PDQ and C-program.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.69-78
• /
• 2009

Korea has achieved significant economic growth with building the Gyeongbu Expressway. As the number of new road construction projects has decreased, it becomes more important to maintain optimal status of the current road networks. One of the best ways to accomplish it is weight enforcement as active control measure of traffic load. This study is to develop High-speed Weigh-in-motion System in order to enhance efficiency of weight enforcement, and to analyze patterns of overloaded trucks on highways through the system. Furthermore, it is to review possibilities of developing overweight control system with application of the HS-WIM system. The HS-WIM system developed by this study consists of two sets of an axle load sensor, a loop sensor and a wandering sensor on each lane. A wandering sensor detects whether a travelling vehicle is off the lane or not with the function of checking the location of tire imprint. The sensor of the WIM system has better function of classifying types of vehicles than other existing systems by detecting wheel distance and tire type such as single or dual tire. As a result, its measurement errors regarding 12 types of vehicle classification are very low, which is an advantage of the sensor. The verification tests of the system under all conditions showed that the mean measurement errors of axle weight and gross axle weight were within 15 percent and 7 percent respectively. According to the WIM rate standard of the COST-323, the WIM system of this study is ranked at B(10). It means the system is appropriate for the purpose of design, maintenance and valuation of road infrastructure. The WIM system in testing a 5-axle cargo truck, the most frequently overloaded vehicle among 12 types of vehicles, is ranked at A(5) which means the system is available to control overloaded vehicles. In this case, the measurement errors of axle load and gross axle load were within 8 percent and 5 percent respectively. Weight analysis of all types of vehicles on highways showed that the most frequently overloaded vehicles were type 5, 6, 7 and 12 among 12 vehicle types. As a result, it is necessary to use more effective overweight enforcement system for vehicles which are seriously overloaded due to their lift axles. Traffic volume data depending upon vehicle types is basic information for road design and construction, maintenance, analysis of traffic flow, road policies as well as research.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.439-446
• /
• 2015

The turnout system, which determines the direction of the train, is not only a key system but also a vulnerable system. Failure of this system may lead to a delay of the train or even casualties. In this light, it is necessary to precisely the conditions of the turnout system. Currently, ROADMASTER of Germany is used as a diagnostic system in Korea. However, a new diagnostic system should be developed for optimized operation of the turnout system with maintenance that is suitable for the Korean railway environment. In this paper, a Fault Tree Analysis for the representative faults of the turnout system is conducted and physical quantities, which can be the cause of the fault, are classified according to the component and function. Also, the measuring factors for the monitoring are derived and a decision making theory is suggested. On the basis of the results, we propose a new turnout diagnostic system that can provide more driverse and precise information than the conventional system.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.3
• /
• pp.140-160
• /
• 2024

The implementation of the "Basic Law on Korean Heritage" on May 17, 2024, brought about significant changes in the operation of Korean heritage-related ordinances in 17 local governments. This study specifically analyzes the production, collection, and information transfer of Korean heritage information between the Korean Heritage Service and local governments, focusing on the provisions of the law. Finally, in order to achieve the goal of revitalizing the management of Korean heritage information, the study suggests five directions for improvement of the local government ordinance from three perspectives. Firstly, in order to systematize the production of Korean heritage information, it is necessary to specify the entities that produce and manage information in Korean heritage, and to select important Korean heritage information from the information produced and manage it strategically. In today's complex Korean heritage management environment, it is impossible to manage all the Korean heritage information produced by various stakeholders. Secondly, in order to systematize the delivery of Korean heritage information, detailed procedures related to the information to be delivered to the Korean Heritage Service should be specified, and a clear plan for information delivery and management between local and basic local governments should be defined. In the Korean heritage information delivery system, local governments play various roles as direct information providers, managers, consumers, and transmitters. Therefore, it is necessary to specify the provisions of the ordinance so that local governments can systematically fulfill their various roles in the Korean heritage information delivery system. Thirdly, in order to activate the production of Korean heritage information, local governments should review the provisions of the Act to ensure that important Korean heritage information generated from directory provisions and non-mandatory provisions, in addition to the mandatory provisions of the Korean Heritage Act, is not omitted. In particular, Korean heritage information is not just administrative information, but also includes specialized information for the maintenance of the current state of Korean heritage. Therefore, if certain Korean heritage information is partially missing, there may be a gap in intergovernmental communication for Korean heritage management.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.68-79
• /
• 2010

With the social infrastructure being deteriorated, there is a growing need to introduce the asset management to social infrastructure management in order to increase their value and save budget. Social infrastructure asset management is a new concept of facility management in response to these demands. It is defined as a procedure for collecting and analysing facility maintenance data and for making and practicing an economically optimized management plan. Detailed survey work of asset management business is analyzed in order to derive a strategy for asset management information. The contents of IIMM of New Zealand and the asset management definition of the FHWA of the United States, and representative facility management systems of Korea are analysed. The role between organizations and the relationship between business and organization were analyzed. Information required for asset management and for existing facility management systems is compared with business of asset management. In this thesis, three development strategies are suggested. The first one is to develop core business of asset management while excluding duplicated development. The second one is to divide system's structure into three layers. And the last one is to share information by interfacing asset management systems with existing facility management systems.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.459-468
• /
• 2019

Purpose: The cavity exploration of the lower part of the road is carried out to prevent ground-sinking. However, the detected communities cannot be identified by the cavity location and history information, such as repackaging the pavement. Therefore, the field applicability of RFID systems was evaluated in this study to enable anyone to accurately identify information. Method: During temporary recovery, tag recognition distance and recognition rate were measured according to underground burial materials and telecommunication tubes using RFID systems with electronic tag chips attached to the bottom of the rubber cap. Result: The perceived distance and perceived rate of depth for each position of the electron tag did not significantly affect the depth up to 15cm, but it did have some effect if the depth was 20cm. In addition, water effects from nearby underground facilities and rainfall are relatively small, and the effects of wind will need to be considered during the weather conditions of the road. Conclusion: The RFID tags for field application of the pavement management system store various information such as location and size of cavity, identification date, cause of occurrence, and surrounding underground facilities to maximize cavity management effect with a system that can be computerized and mobile utilization.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.30-39
• /
• 2003

In this paper, we carried out the performance evaluation of HM-Net(Hidden Markov Network) speech recognition system for Korean speech databases. We adopted to construct acoustic models using the HM-Nets modified by HMMs(Hidden Markov Models), which are widely used as the statistical modeling methods. HM-Nets are carried out the state splitting for contextual and temporal domain by PDT-SSS(Phonetic Decision Tree-based Successive State Splitting) algorithm, which is modified the original SSS algorithm. Especially it adopted the phonetic decision tree to effectively express the context information not appear in training speech data on contextual domain state splitting. In case of temporal domain state splitting, to effectively represent information of each phoneme maintenance in the state splitting is carried out, and then the optimal model network of triphone types are constructed by in the parameter. Speech recognition was performed using the one-pass Viterbi beam search algorithm with phone-pair/word-pair grammar for phoneme/word recognition, respectively and using the multi-pass search algorithm with n-gram language models for sentence recognition. The tree-structured lexicon was used in order to decrease the number of nodes by sharing the same prefixes among words. In this paper, the performance evaluation of HM-Net speech recognition system is carried out for various recognition conditions. Through the experiments, we verified that it has very superior recognition performance compared with the previous introduced recognition system.