• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.113-120
• /
• 1994

Silicon flow sensor that can detect the velocity and direction of air flow was designed and fabricated by integrated circuit process and bulk micromachining technique. The flow sensor consists of three-layered dielectric diaphragm, a heater at the center of the diaphragm, and four thermopiles surrounding the heater at each side of diaphragm as sensing elements. This diaphragm structure contributes to improve the sensitivity of the sensor due to excellent thermal isolation property of dielectric materials and their tiny thickness. The flow sensor has good axial symmetry to sense 2-D air flow with the optimized sensing position in the proposed structure. The sensor is fabricated using CMOS compatible process followed by the anisotropic etching of silicon in KOH and EDP solutions to form I$\mu$ m thick dielectric diaphragm as the last step. TCR(Temperature Coefficient of Resistance) of the heater of the fabricated sensors was measured to calculate the operating temperature of the heater and the output voltage of the sensor with respect to flow velocity was also measured. The TCR of the polysilicon heater resistor is 697ppm/K, and the operating temperature of the heater is 331$^{\circ}C$ when the applied voltage is 5V. Measured sensitivity of the sensor is 18.7mV/(m/s)$^{1/2}$ for the flow velocity of smaller than 10m/s.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.69-76
• /
• 1998

This paper proposes a matrix which represents the confidence in the rotation components of the Iterative Closest Point (ICP) algorithm is image registratiion, The reliability of the ICP algorithm depends on the shape of the object. For example, an object with more complex features shows higher reliablility than the one with rotation symmetry such as a cylinder. We show that the reliablity of the ICP algorithm can be estimated when the input range data has additive noise. Finally, we demonstrate that the proposed reliability formula is in good agreement with the computer simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.1053-1059
• /
• 2013

Heading bias effects in PNS using IMUs attached to shoes are analyzed in this paper. The navigation algorithms of a single foot PNS where one IMU is attached to a foot and dual foot PNSs where two IMUs are attached to each foot are derived. Two navigation algorithms are proposed for the dual foot PNS: 1) the positions from the independent right and left foot PNSs are averaged to provide the final position, 2) the right and left foot PNSs are correlated and it provides positions of each foot. Furthermore, it is proven that two methods are equal. Using the derived navigation algorithms the effect of heading bias caused by a misalignment of the moving direction and IMU is analyzed. The analysis explains the position error of a single foot PNS is diverged while the heading bias is effectively compensated in dual foot PNSs because of the symmetry of heading biases. The experimental results confirm the analysis.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.266-274
• /
• 2014

Parametric bodies reproduce the actual shape of human body parts and should be convenient for general users to change size to judge the visual fit of clothes on-line. In this study, three parametric bodies(i.e. I, C, D ) were compared to verify the accuracy of the provided body dimensions and reproducibility to a target model. To compare reproducibility, the 20s female standard virtual model developed for an apparel industry by Korean agency for technology and standards is used. The investigation of existing parameters showed that the numbers and kinds of parameters provided by each program were different with some errors in notation; in addition, some of virtual body dimensions went beyond the maximum allowable error. The result of changing each parametric body to the 20s female standard body showed that D, C, I in order produced better reproducibility for body dimensions. There were different levels of protrusion and concavity in the virtual cross sections and virtual longitudinal sections despite the small differences in body dimensions and cross sectional areas; in addition, some parametric body was not bilateral symmetry. The results of this study can be used as basic information in the standardization of a virtual model used in a virtual garment program.

• Journal of KIISE:Databases
• /
• v.41 no.4
• /
• pp.199-208
• /
• 2014

In this paper, we represent a system of identification and feature search for scanned comics in consideration of their content characteristics. For creating the feature of the scanned comics, we utilize a method of hierarchical symmetry fingerprinting. Proposed identification and search system is designed to give online service provider, such as Webhard, an immediate identification result under conditions of huge volume of the scanned comics. In simulation part, we analyze the robustness of the identification of the fingerprint to image modification such as rotation and translation. Also, we represent a structure of database for fast matching in feature point database, and compare search performance between other existing searching methods such as full-search and most significant feature search.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.139-143
• /
• 2010

Two-dimensional(2D) images like Multi Planar Reconstruction(MPR) Image or Maximum Intensity Projection(MIP) were used for the purpose of diagnosis, but MPR image's quality were limited due to its superior limit of Z-axis ability to produce permitted radiation exposure virtuous in the permitted time limit from the existing Spiral CT. However, in company with the development of the Multi Detector Computed Tomography(MDCT), we were able to get the Data with the equal amount of Voxel, also get varied reconstructions as in the aspect of our needs. This present study propose a reconstruction technique which is to extract a field using Region of interest(ROI) segmentation method for improvement of the quality of the medical image and after that reconstruct the concerned part using the four-directed symmetry method of the oval, than using the reconstructed data, reorganize the image by using the Curved MPR method. If current proposed method is used, it is highly effective because of its ability to accurately display the disease concerned part, which will reduce the decoding time and also effectively provide information based on the accuracy of the decode.

• Journal of Veterinary Clinics
• /
• v.19 no.2
• /
• pp.139-146
• /
• 2002

The purpose of this study was to construct fundamental information for the usefulness and effects of thermography in Thoroughbred horses. total 10 horses were examined to determine a normal thermal pattern before and after sedation in lower limbs and ophthalmic area, and to investigate the effects of thermography during 42 days after induced wound and arthritis. In normal horses, the range of temperature difference(${\Delta}T$) of symmetry site in lower limbs was 0.20 to $0.68^{\circ}C$ on pre-sedation, which was simillar to that of post sedation, 0.17 to $0.74^{\circ}C$, and eyeball area was 0.34 to $0.68^{\circ}C$. Thermographically, the warmest area in normal limbs were coronary band of frontal view and the region between heel bulbs of back view. And temperature difference(${\Delta}T$) after clipping in left forelimb was increased 1 to $3^{\circ}C$ more than before clipping. However, there was no significant change of the temperature difference and degree of clinical signs by the process of inflammation healing during the experiment period in the all groups. These results suggest that the thermography was especially helpful in following clinical course of a disease because the thermal pattern will return to normal with declining clinical signs and healing of the lesion.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.304-307
• /
• 2015

Carbon nanotubes (CNTs) have been widely accepted and used as the enhancer for polymer nano-composites due to their remarkable mechanical properties. Understandably, the CNT fiber-polymer matrix interface plays a major role in determining the properties of the CNT-polymer nano-composites. Here, using the LCAODFT Lab tool available on the EDISON Nano-Physics site, we performed first-principles density-functional theory calculations to determine the atomic configurations and binding energies of the CNTs in contact with polymers. For the polymer matrixes, we chose poly(acrylonitrile) (PAN), which is one of the most well-known polymer matrixes for the carbon nanofiber nanocomposites. Different chiralities and diameters of pristine CNTs were considered, and several PAN-CNT configurations were prepared based on the atomistic positions and directions of cyano group in PAN. The most favorable configuration of PAN was obtained when the PAN bound parallel to the surface of CNT. Our finding indicates the binding configurations are determined by the direction of the cyano group dominantly rather than the atomistic position of PAN, or the symmetry of CNTs. The result of increasing the length of CNT diameter suggests that PAN is inclinable to align evenly on the surface of relatively large size of CNT with the configuration parallel to the surface. These results obtained in this study will provide the starting point for the design of improved PAN-CNT composites for the next-generation ultra-strong and ultra-light carbon nanofibers.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.73-81
• /
• 2000

This paper presents the design and simulation of a power and area efficient interpolation FIR filter with partitioned look up table (LUT) structure. Using the symmetry of the filters coefficients and the contents of the LUT, the area of the proposed filter is minimized. The two filters share the partitioned LUT and activate the LUT selectively to realize the low power operation. The proposed filter has been designed in a 5.0 Volts 0.6${\mu}m$ CMOS technology. Power consumption results have been obtained from Powermill simulations. Experimental results suggest that the proposed filter reduces both the power consumption by 28% and simultaneously the gate area by 5% simultaneously compared to the previously proposed filters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.8-16
• /
• 2010

In this paper, we present a structure of computationally efficient MIMO-OFDM transmitters, using STBC. Straightforward implementation of these systems requires separate WFT processing blocks for each of the transmit antennas. In our proposed scheme, we use symmetry properties of Fourier transform, and thus use a frequency domain encoding strategy. This greatly reduces the computational burden. The proposed scheme uses just a single IFFT block at each OFDM symbol period, and thus resulting in the same complexity as a single antenna OFDM system. As specific examples of the proposed schemes, we present frequency domain encoding matrices for QO-STBC-OFDM and QO-SFBC-OFDM transmitters.