• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.661-663
• /
• 2016

Corruption occurs in the process of processing image signal and the corruption changes the pixel value within the image to damage the original information. AWGN(additive white Gaussian noise) is a representative example. For filters to remove AWGN, there are filters such as MF(mean filter), WF(wiener filter), and AWMF(adaptive weighted mean filter). However images processed through standard previous filters lock preservation characteristics in edge areas. Therefore, threshold value is applied for processing on the standard deviation of the local mask in this study and if the standard deviation is smaller than the threshold value, it is not filtered and if the value is bigger than the threshold value, the study suggested an algorithm that processes using weighted value utilizing standard deviation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.16-24
• /
• 2007

Wireless mesh network extends the limited coverage of conventional wireless service from one-hop access point to wider area. It is recognized as an important issue to provide seamless handoff in the wide coverage of wireless mesh network. A long handoff delay may cause high packet loss and disconnection of service, degrading the network performance. The handoff delay is mainly introduced from the channel scanning process obtaining information to make handoff decision and the unnecessary handoffs due to inaccurate handoff decision. In this paper, we propose the handoff algorithm based on one-way trip time (OTT) to expedite the handoff procedure. As compared to the handoff algorithm based on the receiving signal power, the proposed algorithm takes advantage of OTT to obtain the necessary handoff information in a relatively shorter time and reduce the unnecessary handoffs. The performance of proposed algorithm is evaluated through the simulations. It is verified that the proposed handoff algorithm can effectively enhance the handoff accuracy, and therefore reduce the handoff delay and unnecessary handoffs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.338-348
• /
• 2005

Currently, IEEE 802.11 Wireless LAN (WLAN) is rising as the most popular means for the broadband wireless access network. In this thesis, we propose a QoS(Quality of Service)-Oriented mechanism using handshaking method of scanning phase in IEEE 802.11 handoff. In conventional process for handoff, the major criterion to select the best AP(Access Point) among candidates is normally based on the RSS(Received Signal Strength), which does not always make the selected network guarantee the maximum achievable performance. Even though the link quality with a neighboring AP is excellent, the AP may not be a good candidate to handoff to simply because MAC(Medium Access Control) protocol of IEEE 802.11 standard is contention-based such as CSMA/CA. Therefore, if we apply network level information to AP selection criteria, we can achieve better handoff efficiency rather than before. The analysis and simulation results applied to our new mechanism show clearly better performance than AP selection based on traditional handoff method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.951-954
• /
• 2005

This paper presents a study on the accuracy position Controller design for the Composite Smoke Bomb Rotational driving system using a BLDC servo motor. Function of Smoke Bomb is blind in the enermy's sight so that need to high response. The BLDC servo motor controller was designed with DSP(TMS320VC33), IGBT(Insulated Gate Bipolar. Transistor), IGBT gate driver and CPLD(EPM7128). This paper implements those control with vector control and MIN-MAX PWM. Vector control requires information about rotor positions, a resolver should be used to achieve that. The main controller is implemented with a TMS320VC33 high performance floating-point DSP(Digital Signal Process) and PWM Generator is embodied using EPM7128.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.701-709
• /
• 2011

In semiconductor wafer fabrication, etching is one of the most critical processes, by which a material layer is selectively removed. Because of difficulty to correct a mistake caused by over etching, it is critical that etch should be performed correctly. This paper proposes a new approach for etch endpoint detection of small open area wafers. The traditional endpoint detection technique uses a few manually selected wavelengths, which are adequate for large open areas. As the integrated circuit devices continue to shrink in geometry and increase in device density, detecting the endpoint for small open areas presents a serious challenge to process engineers. In this work, a high-resolution optical emission spectroscopy (OES) sensor is used to provide the necessary sensitivity for detecting subtle endpoint signal. Partial Least Squares (PLS) method is used to analyze the OES data which reduces dimension of the data and increases gap between classes. Support Vector Machine (SVM) is employed to detect endpoint using the data after PLS. SVM classifies normal etching state and after endpoint state. Two data sets from OES are used in training PLS and SVM. The other data sets are used to test the performance of the model. The results show that the trained PLS and SVM hybrid algorithm model detects endpoint accurately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.1987-1996
• /
• 2009

Recently, the color of vehicle license plate has been changed from green to white. Thus the vehicle plate recognition system used for parking management systems, speed and signal violation detection systems should be robust to the both colors. This paper presents a vehicle license plate recognition system, which works on both of green and white plate at the same time. In the proposed system, the image of license plate is taken from a captured vehicle image by using morphological information. In the next, each character region in the license plate image is extracted based on the vertical and horizontal projection of plate image and the relative position of individual characters. Finally, for the recognition process of extracted characters, PCA(Principal Component Analysis) and LDA(Linear Discriminant Analysis) are sequentially utilized. In the experiment, vehicle license plates of both green background and white background captured under irregular illumination conditions have been tested, and the relatively high extraction and recognition rates are observed.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.407-412
• /
• 2007

The performance of ultrasonic testing systems for industrial or medical purpose largely depends on the performance of ultrasonic transducers. Generally, the information about an ultrasonic transducer performance characteristics are expressed by the ultrasonic R/F signal back from a reflector and its frequency characteristics in the data sheet provided by manufacturers. In case of focused ultrasonic transducers, the two pieces of information can, however, hardly assure that the focused ultrasonic transducer would produce well-focused C-scan images. Therefore, we propose the measured size of focal spot and the reconstructed shape of effective focal zone in the focused sound field as novel measures for the performance evaluation of the focused ultrasonic transducers. The process of getting the both measures of the transducers is conducted by the implemented software including sound field scanning and virtual 3D reconstruction functions which requires the echo of a point reflector. The proposed method could, otherwise impossible in the existing method, effectively and simply distinguish superior ones among many transducers made in the same specification and be also used to detect the performance degradation due to the aging of the transducers. Eventually, the quality of performance of the ultrasonic testing systems for industrial or medical purpose is secured.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.962-970
• /
• 2021

The cause of the majority of vehicle accidents is a safety issue due to the driver's inattention, such as drowsy driving. A forward collision warning system (FCWS) can significantly reduce the number and severity of accidents by detecting the risk of collision with vehicles in front and providing an advanced warning signal to the driver. This paper describes a low power embedded system based FCWS for safety. The algorithm computes time to collision (TTC) through detection, tracking, distance calculation for the vehicle ahead and current vehicle speed information with a single camera. Additionally, in order to operate in real time even in a low-performance embedded system, an optimization technique in the program with high and low levels will be introduced. The system has been tested through the driving video of the vehicle in the embedded system. As a result of using the optimization technique, the execution time was about 170 times faster than that when using the previous non-optimized process.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.6
• /
• pp.121-130
• /
• 2007

In this paper, we propose a reversible watermarking scheme in the JPEG compression domain. The reversible watermarking is useful to authenticate the content without the quality loss because it preserves the original content when embed the watermark information. In the internet, for the purpose to save the storage space and improve the efficiency of communication, digital image is usually compressed by JPEG or GIF. Therefore, it is necessary to develop a reversible watermarking in the JPEG compression domain. When the watermark is embedded, the lossless compression was used and the original image is recovered during the watermark extracting process. The test results show that PSNRs are distributed from 38dB to 42dB and the payload is from 2.5Kbits to 3.4Kbits where the QF is 75. Where the QF of the Lena image is varied from 10 to 99, the PSNR is directly proportional to the QF and the payload is around $1.6{\sim}2.8Kbits$.