• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.215-221
• /
• 2016

In this thesis we introduce a large quantity of input interface system using a low cost single chip microcontroller which is consists of walking board with 1600 switches, RS485 communication for switch data communication and PC application software for walking pattern analysis. When a pedestrian walks on the walking board, the pattern analysis of foot pressed switches can be utilized on diverse divisions of sports and industry such as walking physical therapy, dancing, a large quantity of sensors interface system, etc.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.134-141
• /
• 1998

Sometimes we need to acquire symbolic quantity of information instead of physical quantity for the output of any system. For instance we can not control traffic signal accurately through only the number of vehicles. At that case we can produce better output using symbolic quantity of road length and width and vehicle type. But it is very difficult to aggregate symbolic information from the unrelated and mutually conflicted input after calculating linear and related expression. Moreover that will take much time to produce symbolic output by the physical quantity only. In this paper we implemented the ultimate traffic control information by using fuzzy sensor algorithm and compared our results with the conventional traffic controller after studying the necessity of symbolic information in the traffic control.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.107-114
• /
• 2004

This paper represents the application of the 3D CAD Model data for 4D simulation and quantity estimation. These support the effective and practical use of 4D CAD model. By using and manipulating the 3D CAD model information, scheduling and quantity estimation could be developed more quickly and effectively. So the 3D CAD model information is made use of not only drawing a blueprint but also playing an important part of data integration platform. The scheduling module sets up the schedule generation logic that consists of period, priority of element arrangement, and time lag of floor placement. It sorts the working items as a priority of working process. And the quantity estimation module queries the material quantity of the structural elements according to the scheduling conditions. These two modules are developed using the 3D CAD model information and assist the function of 4D CAD model.

• Information Systems Review
• /
• v.19 no.2
• /
• pp.71-94
• /
• 2017

Recommender systems reduce information overload and enhance choice quality. This technology is used in many services and industry. Previous studies did not consider recommendation quantity and the repetitive recommendations of an item. This study is the first to examine recommender systems by considering recommendation quantity and repetitive recommendations. Only a limited number of items are displayed in offline stores because of their physical limitations. Determining the type and number of items that will be displayed is an important consideration. In this study, I suggest the use of a user-based recommender system that can recommend the most appropriate items for each store. This model is evaluated by MAE, Precision, Recall, and F1 measure, and shows higher performance than the baseline model. I also suggest a new performance evaluation measure that includes Quantity Precision, Quantity Recall, and Quantity F1 measure. This measure considers the penalty for short or excess recommendation quantity. Novelty is defined as the proportion of items in a recommendation list that consumers may not experience. I evaluate the new revenue creation effect of the suggested model using this novelty measure. Previous research focused on recommendations for customer online, but I expand the recommender system to cover stores offline.

• Journal of Information Management
• /
• v.23 no.2
• /
• pp.1-13
• /
• 1992

This study intends to measure the indexibility and the information quantity in title and abstract. The result of analysis was that when the source was title or abstract, result was not good. But when it was the title and abstract, the result was better.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.1
• /
• pp.242-252
• /
• 2005

Purpose : This study carried out to develop the questionnaires that can measure objectively menstrual quantity and determine quantity index. Method : First, we made questionnaires to measure menstrual quantity by six question. Then we investigated 1309 women's questionnaires who has the menses. Conclusion : 1. the questionnaires that can measure objectively menstrual quantity and determine quantity index was high a correlation coefficient therefore those were used Method of Menstrual Quantity(here after MMQ) calculation. Those were added and averaged. 2. We examined correlation of calculated MMQ and women's questionnaires who has the menses therefore we got 0.30~0.47 correlation. 3. MMQ 1~3(hypomenorrhea) was 39 persons 3.19%, MMQ 4~6(normal menorrhea) was 1050 persons 85.85% and MMQ 7~10(hypermenorrhea) was 134 persons 10.96%. MMQ 4 tended to be little and MMQ 6 tended to be much. 4. MMQ confidence was high as 82% comparatively so we thought MMQ was appropriate as the measured method of menstrual quantity.

• Journal of the Korean Society for Library and Information Science
• /
• v.36 no.2
• /
• pp.265-284
• /
• 2002

The purposes of this study are research for user's perspective and satisfaction, and analyze degree of difference in user's perspective and satisfaction through electronic library system of National Assembly Library. According to analysis of questionnaire, score of the factors that quantity of information, latest of information, quality of information, system of classification, accuracy of information are higher than average in user's perspective. Also score of the factors that speed of response, quality of information, consistency of information, consistency of retrieval, quantity of information, accuracy of information are higher than average in user's satisfaction. Result of analysis show that latest of information, quantity of information, variety of information, system of classification, accuracy of information are higher gap in user's perspective and satisfaction.

• Journal of information and communication convergence engineering
• /
• v.1 no.2
• /
• pp.93-97
• /
• 2003

This paper proposes a new generation scheduling algorithm which can consider total quantity of contamination and energy limits based on Lagrangian Relaxation. First, we formulate a Lagrangian function which consider quantity of contamination including substitution of fuel, and quantity of fuel. Second, we developed Multi-state S.U.D.P. which can treat multiple fuels. Third, we propose an effective generation scheduling algorithm including Multi-state S.U.D.P.. As a results, unit commitment and generating power can be obtained to meet the environmental and fuel constraints with fuel substitution. By applying it to the test system, effectiveness of the method is verified.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.154-164
• /
• 2023

The Construction Technology Information System collects, processes, and provides the public with free of charge 16 types of construction technology-related texts or index information, such as construction standards, construction practices, and construction reports, required at construction sites to enhance domestic construction technology. This study judged that user satisfaction could be increased if the budget was allocated first to the most effective construction technology information DB establishment. For each type of construction technology information, the level of satisfaction felt by the population for the quantity provided and the value of use according to the acquisition and utilization of information were investigated. Reliability between independent variables and dependent variables through a multiple regression analysis process to identify how the demographic characteristics of the population affect user satisfaction and the factors that affect the use value of information for each type of construction technology information. and the correlation was analyzed. The correlation between the demographic characteristics of respondents and users' satisfaction with the provided quantity was generally low, but construction experience, age, etc. were found to have an effect on satisfaction with the provided quantity. In particular, among the demographic measurement items of respondents, the more construction experience they had, the higher their satisfaction level with the quantity provided of low-level technical standards, and it was analyzed that older age had an impact on satisfaction with the quantity provided for small and medium-sized business support information.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1031-1038
• /
• 2005

In this paper, the maximum traffic quantity and actual traffic quantify of the data which are needed to grasp the statement of a system will be measured more accurately. A concrete quality measurement will be conducted by analysing a change of traffic quantity according to a protocol change and traffic under an overload condition when there is an accident. As a result can make an opportunity to maximize safety of power SCADA. Furthermore, future traffic quantity can be prospected by knowing current traffic quantity and grasping the rate of increase by the analysis and the information can be used as data to secure the band width in advance. It can make stable operation of power SCADA by arranging the limited network resources efficiently by information analysis of a network and expects more confidence.