• Analytical Science and Technology
• /
• v.26 no.6
• /
• pp.387-394
• /
• 2013

We aim to unveil dietary history recorded in Neolithic human bone from Janghang site at Gadeok Island, Busan. Excavation of Janghang site at Gadeok Island from 2010 to 2011 is an outstanding discovery in Korean Neolithic archaeology. A large number of human bones (48 individuals) were found at Janghang site, which is the largest-scale Neolithic cemetery in Korea. We extracted human bone collagen from 10 individuals and stable carbon and nitrogen isotope analysis were carried out using carbon and nitrogen analyzer connected to a continuous-flow isotope-ratio-monitoring mass-spectrometer. Although bone histological analysis shows poor preservation state, stable isotope results correspond well with bone collagen quality indicator, which implies that bone collagen reflects lifetime signature. Stable carbon and nitrogen isotope result indicates highly marinebased diet(${\delta}^{13}$C=$-14.5{\pm}1.3$‰, ${\delta}^{15}$N=$-17.4{\pm}1.7$‰, n=10), however the possible input of terrestrial animal and wild plant cannot be excluded. Our isotopic findings provide an invaluable information on Neolithic subsistence economy in this coastal area. In addition, Janghang site shows specific features in burial methods and burial goods. Two different burial methods of arranging bodies are found with extended burial type and particularly high ratio of flexed burial type. There are also burial goods such as pottery. However, there are no significant isotopic differences according to burial methods and burial goods. Although this is a preliminary study on this site, our research will provide important clues in understanding isotopic dietary history of Korean Neolithic people.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.1-10
• /
• 2006

Most display characterization methods, such as the gain-offset-gamma (GOG) model and S-curve model, generally assume that displays have two fundamental characteristics, channel -chromaticity-constancy and channel-independence. However, these assumptions are not so applicable in the case of liquid crystal (LC)-based mobile displays. Accordingly, modifications are required to enable the application of conventional display characterization methods to mobile displays. Therefore, this study proposes the modeling of distinct EOTFs in terms of the X, Y, and Z values for each channel to consider the differences among the EOTFs resulting from channel-chromaticity-inconstancy. In addition, to overcome the poor additivity property among the channels due to channel-interaction, the proposed method also models and uses the EOTFs of the X, Y, and Z values for the inter-channel components cyan, magenta, yellow, and gray Experimental results confirm that the mobile display color values predicted by the proposed characterization method are more accurate than those predicted by other characterization methods due to considering the channel-chromaticity-inconstancy and/or channel-dependence of the display.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.102-116
• /
• 2009

There have been lots of researches for H.264/AVC performance enhancement on a multi-core processor. The enhancement has been performed through parallelization methods. Parallelization methods can be classified into a task-level parallelization method and a data level parallelization method. A task-level parallelization method for H.264/AVC decoder is implemented by dividing H.264/AVC decoder algorithms into pipeline stages. However, it is not suitable for complex and large bitstreams due to poor load-balancing. Considering load-balancing and performance scalability, we propose a horizontal data level parallelization method for H.264/AVC decoder in such a way that threads are assigned to macroblock lines. We develop a mathematical performance expectation model for the proposed parallelization methods. For evaluation of the mathematical performance expectation, we measured the performance with JM 13.2 reference software on ARM11 MPCore Evaluation Board. The cycle-accurate measurement with SoCDesigner Co-verification Environment showed that expected performance and performance scalability of the proposed parallelization method was accurate in relatively high level

• Journal of Technologic Dentistry
• /
• v.37 no.4
• /
• pp.271-284
• /
• 2015

Purpose: The purpose of this study was to examine the usage of CAD/CAM, which is one of dental technologist duties, in an effort to look for any possible changes in the usage of CAD/CAM. It's specifically meant to compare the results of this study with those of Lee Jong-do, Park Kwang-Sig(2011)'s study in March, 2011, to determine if there were any changes over the past four years. The selected variables that were investigated were the ownership of CAD/CAM, awareness of it, the route of acquiring the first information on it, the merits and demerits of its usage, usage experience and educational experience about it. Methods: An online survey was conducted on the dental technologists who worked in urban communities including metropolitan cities to find out the usage of CAD/CAM in 2015 from July 15 to 31, 2015, after existing questionnaire items were modified. The collected data were analyzed by IBM SPSS statistics 22.0, and statistical data on frequency, percentage, mean and standard deviation for each item were obtained. To figure out the characteristics of the subjects and the relationship between their occupational characteristics and the usage of CAD/CAM, crosstabs, independent-samples t-test and one-way ANOVA were utilized. As for the usage of CAD/CAM in 2011, the results of Lee Jong-do, Park Kwang-Sig(2011)'s study were selected, and then a comparative analysis was made. The level of significance was all set at .05. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: As a result of analyzing the usage of CAD/CAM that was one of dental technologist duties, there was a great increase in the ownership of CAD/CAM in their workplaces from 2.4 percent in 2011 to 71.7 percent in 2015, and there was an improvement in awareness about it and the necessity of its usage as well. In 2011, the Internet and mass media were the most common route that they got to know about it. They had a strong tendency to acquire related knowledge through education in 2015, and there were some changes in the products that they used or preferred. In both years, the great merit of CAD/CAM was the simplified manufacturing process of restoration, and it had another great advantages in 2015 such as the improved quality of restoration or improved environments for dental technology. Concerning disadvantages, high price was a big problem in 2011. In 2015, not only price but the burden of material costs, frequent breakdown, poor demand among dental clinics and a lack of CAD/CAM professionals were pointed out a lot. In the future, this researcher intends to make research to seek ways of improving CAD/CAM professionals. Conclusion: There was more awareness of CAD/CAM in 2015 than in 2011 when the changes in awareness of it were analyzed, and the finding suggest the necessity of sustained education and concern.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.601-608
• /
• 2014

In this paper, we have characterized the electrical properties related to gate leakage current in AlGaN/GaN MISHFETs with varying the thickness (0 to 10 nm) of $Al_2O_3$ gate insulator which also serves as a surface protection layer during high-temperature RTP. The sheet resistance of the unprotected TLM pattern after RTP was rapidly increased to $1323{\Omega}/{\square}$ from the value of $400{\Omega}/{\square}$ of the as-grown sample due to thermal damage during high temperature RTP. On the other hand, the sheet resistances of the TLM pattern protected with thin $Al_2O_3$ layer (when its thickness is larger than 5 nm) were slightly decreased after high-temperature RTP since the deposited $Al_2O_3$ layer effectively neutralizes the acceptor-like states on the surface of AlGaN layer which in turn increases the 2DEG density. AlGaN/GaN MISHFET with 8 nm-thick $Al_2O_3$ gate insulator exhibited extremely low gate leakage current of $10^{-9}A/mm$, which led to superior device performances such as a very low subthreshold swing (SS) of 80 mV/dec and high $I_{on}/I_{off}$ ratio of ${\sim}10^{10}$. The PF emission and FN tunneling models were used to characterize the gate leakage currents of the devices. The device with 5 nm-thick $Al_2O_3$ layer exhibited both PF emission and FN tunneling at relatively lower gate voltages compared to that with 8 nm-thick $Al_2O_3$ layer due to thinner $Al_2O_3$ layer, as expected. The device with 10 nm-thick $Al_2O_3$ layer, however, showed very high gate leakage current of $5.5{\times}10^{-4}A/mm$ due to poly-crystallization of the $Al_2O_3$ layer during the high-temperature RTP, which led to very poor performances.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.66-71
• /
• 2019

In this paper, a study was conducted on the method of using GPR data to predict rebar thickness inside a facility. As shown in the cases of poor construction, such as the use of rebars below the domestic standard and the construction of reinforcement, information on rebar thickness can be found to be essential for precision safety diagnosis of structures. For this purpose, the B-scan data of GPR was obtained by gradually increasing the diameter of rebars by making specimen. Because the B-scan data of GPR is less visible, the data was converted into the heatmap image data through migration to increase the intuition of the data. In order to compare the results of application of commonly used B-scan data and heatmap data to CNN, this study extracted areas for rebars from B-scan and heatmap data respectively to build training and validation data, and applied CNN to the deployed data. As a result, better results were obtained for the heatmap data when compared with the B-scan data. This confirms that if GPR heatmap data are used, rebar thickness can be predicted with higher accuracy than when B-scan data is used, and the possibility of predicting rebar thickness inside a facility is verified.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.377-383
• /
• 2015

This study evaluates the convergence radiation protection performance by measuring the PSNR(peak signal-to-noise ratio) values of the image J in the image evaluation program based on increased relative to this exposure of radiation workers.The aim of this study was to evaluate radiation protection performance of apron for design of it's basic information. Method was used to PSNR of Image J program and good condition apron was more than 27dB, the PSNR value of poor condition apron appeared to be less than 24dB. The result is the normality were satisfied distribution and T-test values were statistically significant with p<0.001. Results of evaluation of the performance protective apron through the more easily accessible experimental conditions and methods in the clinical was confirmed distinctly different. in order to reduce the radiation exposure we need to evaluate convergence protection performance and to be having a good performance apron.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.291-299
• /
• 2016

Recently, the knowledge industry center has played a role as a facility that creates economic added value because of the high-tech companies related to the knowledge industry, information, and communication. On the other hand, support facilities that are provided in the knowledge industry center are meant to support the company in the center and improve the working conditions of laborers. On the other hand, the support policy established by the government applies to some companies, and none of the support policy is carried out in supporting facilities in the knowledge industry center. In this study, multiple analysis was performed, focusing on the support facilities in the knowledge industry center that aims to improve the working environment of laborers. This study suggests the introduction of guidelines to secure adequate area, depending on the type of supporting facilities in the Knowledge Industrial Center. The sharing of facilities, such as cultural and commercial use for Knowledge Industrial Center, corresponding to poor provision, is recommended. Because the analysis of IPA indicates that the area of commercial support facilities are higher than others and cultural facilities are more important and preferred, it is necessary to compose support facilities that consider the user's individual characteristics. Facilities impacting the working environment need to be planned carefully through a district unit plan at the initial stages of development, thus assisting the production activity of workers.

• Journal of Korean Academy of Nursing
• /
• v.30 no.4
• /
• pp.1006-1017
• /
• 2000

The purpose of this study was to provide basic information for developing a nursing intervention that helps patients learn how to acquire coping to reduce post operation uncertainty and anxiety by investigating the level of uncertainty and anxiety experienced by mastectomy patients. The subjects were 134 patients selected from St. Mary's Kangnam and St. Mary's hospital, and the data collection period was from October to December of 1998. Uncertainty was measured by using Mishel Uncertainty in Illness Scale (MUIS), anxiety measured by using State-Trait Anxiety Inventory(STAI), and coping by using a questionnaire developed by Kim & Yoo (1996). Data were analyzed with SAS program by t-test, ANOVA, Duncan's multiple range test, Pearson correlation coefficients, and stepwise multiple regression. The results were as follows : 1. The mean uncertainty score was 57.6. The results of the correlation between the compliance of medical regimen and demographic characteristics were as follows ; Those who monthly income over 2,010,000 won had lower than above 1,000,000 won, and those with the experience of chemotherapy had higher than those without, and the patient who has 7∼12 months(1 yr.) post operation period had higher than the one below 6months, 25∼36 months(3 yrs.), 37∼60 months(5 yrs.), and over 61 months. 2. The mean anxiety score was 45.9. Anxiety tended to be increased slightly in subjects with low educational background, poor monthly income, experience of chemotherapy, and 7∼12 months(1 yr.) post operation period, but there was no significant difference by general characteristics 3. The mean value of the coping score was 100.7. The study revealed higher score in problem-focused coping than emotion-focused coping. In regard to coping by demographic characteristics were as follows ; those who had monthly income over 2,010,000 won had higher level of coping than those whose monthly income was between 1,010,000 and 2,000,000 won. In terms of problem- focused coping, those who had 25∼36 months of post operation period showed significantly lower level of coping than those below 6 months or 37∼60 months(5 yrs.) or over 61 months of post operation period. Regarding the emotion-focused coping, those with the christianity had significantly lower level of coping than those without it. Also, those whose monthly income over 2,010,000 won had significantly higher coping level than those with income of between 1,010,000 and 2,000,000 won. 4. A positive relationship was found between uncertainty and anxiety. Patients who experienced more uncertainty also showed more anxiety. Problem-focused coping was inversely related to uncertainty and anxiety. 5. The major variable that affected uncertainty was anxiety, explaining 63.3% of the uncertainty. In addition to this, it would explain 66.4% in total when experience of chemotherapy was added.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.79-86
• /
• 2008

In the manufacturing industries using HDI(hexamethylene diisocyanate) product hardeners, exposure to HDI is common to spray painters in terms of inhalation and dermal or ocular contact. Due to a lack of information for spray painters in automobile and furniture industries, a questionnaire survey was conducted for the prevalence of adverse health symptoms(33 spray painters and an unexposed group n = 91) to assess the importance of personal controls. Despite the small sample size, common health symptoms were reported, such as skin symptoms(dry cracked skin-61% and dermatitis/skin irritation-33%) and respiratory symptoms(phlegm-49%, asthma-21%). In addition, other adverse health symptoms were reported, such as skin rash(12%), cough(39%), shortness of breath with wheezing(30%), chest tightness and difficulty in breathing(30%). No significant eye symptoms were reported. It was founded that the adverse health symptoms reported in this study were related to poor personal work practices and inappropriate PPE use. Therefore, appropriate personal controls like PPE use, work practices, regular training and education are suggested to minimize the risk of health symptoms. In addition, medical examination will also be suggested for individual health effects.