• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.257-266
• /
• 2012

A decode-and-forward two-way relay system benefits from orthogonal frequency division multiplexing (OFDM) and relay transmission. In this paper, we consider a decode-and-forward two-way relay system over OFDMwith two strategies: A joint subcarrier matching algorithm and a power allocation algorithm operating with a total power constraint for all subcarriers. The two strategies are studied based on average capacity using numerical analysis by uniformly allocating power constraints for each subcarrier matching group. An optimal subcarrier matching algorithm is proposed to match subcarriers in order of channel power gain for both transmission sides. Power allocation is defined based on equally distributing the capacity of each hop in each matching group. Afterward, a modified water-filling algorithm is also considered to allocate the power among all matching groups in order to increase the overall capacity of the network. Finally, Monte Carlo simulations are completed to confirm the numerical results and show the advantages of the joint subcarrier matching, power allocation and water filling algorithms, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.302-305
• /
• 2007

In recent years, many researches on new storage media with high capacity and information are developing. For manufacture of optical storage with high capacity, the injection molding process is generally used. In order to increase the filling ratio of the injection molding structure, the injection molding process required for high injection pressure, packing pressure and temperature control of the mold. However, conventional injection molding process is difficult to increase the filling ratio using injection master with the range of several nanometers and high aspect ratio. In order to improve and increase filling ratio of nano-structure with high aspect ratio, the active temperature control of injection mold was used. Experimental conditions were used injection pressure, time and temperature. Consequently, by using the peltier device into injection mold, we carried out the efficient and active temperature control of mold at low cost.

• Journal of Communications and Networks
• /
• 제14권2호
• /
• pp.151-161
• /
• 2012

This paper considers a two-user Gaussian interference channel with energy harvesting transmitters. Different than conventional battery powered wireless nodes, energy harvesting transmitters have to adapt transmission to availability of energy at a particular instant. In this setting, the optimal power allocation problem to maximize the sum throughput with a given deadline is formulated. The convergence of the proposed iterative coordinate descent method for the problem is proved and the short-term throughput maximizing offline power allocation policy is found. Examples for interference regions with known sum capacities are given with directional water-filling interpretations. Next, stochastic data arrivals are addressed. Finally, online and/or distributed near-optimal policies are proposed. Performance of the proposed algorithms are demonstrated through simulations.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.905-911
• /
• 2005

본 논문은 제한적인 피드백을 이용하는 OFDM 시스템에서 용량 극대화를 위한 효율적인 적응 부 반송파 선택 방식을 제안한다. 제안하는 방식에서는 데이터 전송에 사용될 부 반송파들과 각 부 반송파에 적용될 변조 및 코딩 방식들이 수신기에서 결정되고, 제한적인 피드백을 통해 송신기로 전달된다. 본 연구에서는 채널 환경에 따라 적절한 수의 높은 신호 대 잡음 비를 갖는 부 반송파들을 선택함으로써 용량이 극대화됨을 이론적으로 유도한다. 또한, 낮은 복잡도로 최적의 부 반송파 집합을 선택하기 위한 정렬 방식을 사용하는 적응 부 반송파 선택 알고리즘을 제안한다. 시뮬레이션 결과는 제안된 적응 부 반송파 선택 방식이 제한된 feedback 정보량만으로 water-filling 방식에 의한 부 반송파 선택 방식이나 water-filling 전력 할당에 의한 용량보다 높은 용량을 제공함을 보여준다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2124-2143
• /
• 2016

In Long Term Evolution-Advanced (LTE-A) systems, Inter-cell Interference (ICI) is a prominent limiting factor that affects the performance of the systems, especially at the cell edges. Based on the literature, Fractional Frequency Reuse (FFR) methods are known as efficient interference management techniques. In this report, the proposed Dynamic Fractional Frequency Reuse (DFFR) technique improved the capacity and cell edge coverage performance by 70% compared to the Fractional Frequency Reuse (FFR) technique. In this study, an improved power allocation method was adopted into the DFFR technique to reach the goal of not only reducing the ICI mitigation at the cell edges, but also improving the overall capacity of the LTE-A systems. Hence, an improved water-filling algorithm was proposed, and its performance was compared with that of other methods that were considered. Through the simulation results and comparisons with other frequency reuse techniques, it was shown that the proposed method significantly improved the performance of the cell edge throughput by 42%, the capacity by 75%, and the coverage by 80%. Based on the analysis and numerical expressions, it was concluded that the proposed DFFR method provides significant performance improvements, especially for cell edge users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.1951-1972
• /
• 2018

Wi-Fi Access Point (AP) optimization approaches are used in indoor positioning systems for signal coverage enhancement, as well as positioning precision improvement. Although the huge power consumption of the AP optimization forms a serious problem due to the signal coverage requirement for large-scale indoor environment, the conventional approaches treat the problem of power consumption independent from the design of indoor positioning systems. This paper proposes a new Fast Water-filling algorithm Group Power Constraint (FWA-GPC) based Wi-Fi AP optimization approach for indoor positioning in which the power consumed by the AP optimization is significantly considered. This paper has three contributions. First, it is not restricted to conventional concept of one AP for one candidate AP location, but considered spare APs once the active APs break off. Second, it utilizes the concept of water-filling model from adaptive channel power allocation to calculate the number of APs for each candidate AP location by maximizing the location fingerprint discrimination. Third, it uses a fast version, namely Fast Water-filling algorithm, to search for the optimal solution efficiently. The experimental results conducted in two typical indoor Wi-Fi environments prove that the proposed FWA-GPC performs better than the conventional AP optimization approaches.

• 전자공학회논문지
• /
• 제54권8호
• /
• pp.67-80
• /
• 2017

본 논문에서는 추정된 시공간 배경 정보를 이용하여 자유 시점에서 합성영상을 생성하기 위한 홀채움 방식을 제안한다. 시간적 배경 정보를 추정하기 위해 비겹침 패치 기반의 배경 코드북을 이용한 새로운 시간적 배경 모델을 소개한다. 더불어, 공간적 배경 후보의 하한 및 상한 값의 제약 조건을 설정하는 깊이영상 기반 공간적 국부 배경 예측 방식에 대해 제안한다. 추정된 시간적 배경 정보와 공간적 배경 정보의 유사도를 비교하여 가려짐 배경 영역의 홀채움 과정을 수행한다. 또한 3-D 워핑 후 발생하는 컬러영상과 깊이영상간의 불일치 문제를 해결하기 위해 깊이영상 기반의 고스트 제거 필터를 기술한다. 마지막으로 잔여 홀을 채우기 위해 새로운 깊이 항을 포함한 우선순위 함수를 이용하여 인페인팅 방식이 적용된다. 실험 결과를 통해 기존의 홀채움 방식들과 비교하여 제안하는 방식의 객관적, 주관적 성능의 우수성을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제5권1호
• /
• pp.38-43
• /
• 2004

We designed and implemented a medical image query system, including a relational database and DBMS (database management system), which can visualize image data and can achieve spatial, attribute, and mixed queries. Image data used in querying can be visualized in slice, MPR(multi-planner reformat), volume rendering, and overlapping on the query system. To reduce spatial cost and processing time in the system. brain images are spatially clustered, by an adaptive Hilbert curve filling, encoded, and stored to its database without loss for spatial query. Because the query is often applied to small image regions of interest(ROI's), the technique provides higher compression rate and less processing time in the cases.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.786-793
• /
• 2004

cdma2000 IxEV-DO 네트워크의 역방향 링크에서와 같은 자율적 전송률 제어 (ARC, Autonomous data Rate Control) 구조는 다중 QoS 환경에서의 다양한 QoS 보장 및 RoT (Rise over Thermal) 제약 조건을 만족시키지 못하는 문제가 있다. 이에 따라, 본 논문에서는 cdma2000 기반의 역방향 링크 시스템을 위한 자원 관리 기술로서, MWGF (Modified Weighted G-Fair) 스케줄러를 제안하고, 다중 QoS 서비스 환경에서 성능을 분석하였다. 제안된 스케줄러는 QoS 요구를 고려한 우선 순위를 제공할 뿐만 아니라 RoT-filling 기법을 이용해서 RoT 정규화를 보장함으로서 CDMA 시스템의 로딩 (loading)을 유지하는 구조로 설계되었다. 모의실험을 통하여, 제안된 스케줄러는 자율적 전송률 제어 구조에 비하여, 약 29 - 40 % 정도의 실시간 서비스의 전송 시간이 단축되는 것을 보였으며, 약 1.0 - 1.3 dB의 낮은 평균 수신 RoT 레벨을 유지하여 낮은 시스템 로딩을 제공함을 보였다. 이와 같은 낮은 시스템 로딩은 여분의 간섭량을 타 서비스 또는 타 셀에 제공하여 시스템 전체의 용량을 증가시킬 수 있게 된다.