• Women's Health Nursing
• /
• v.26 no.2
• /
• pp.141-150
• /
• 2020

Purpose: High-quality nursing care must be provided for women with infertility, and their nursing needs must be identified. Although scales have been developed to assess infertility-related stress, quality of life, and psychosocial status, there is a lack of scales that assess the nursing needs of women with infertility. The purpose of this study was to develop a needs assessment scale for nursing care in women with infertility and to verify its reliability and validity. Methods: The 250 subjects in this study were women with infertility recruited from four hospitals. The scale was developed following the framework of DeVellis, through a literature review, in-depth interviews, development of preliminary items, verification of content validity, development of secondary items, verification of construct validity, and extraction of the final items. Date were analyzed using item analysis, factor analysis, confirmatory factor analysis, Pearson correlation coefficients, and Cronbach's alpha. Reliability was tested using Cronbach's alpha, and validity was evaluated using item analysis, exploratory factor analysis, and criterion validity. Results: The final version of the nursing needs assessment scale for woman with infertility consisted of 18 items. Four factors (physical and psychological nursing needs, needs for information regarding treatment, needs for infertility-related understanding and concern, and supportive needs) explained 66.0% of the total variance. Cronbach's alpha was .92 for the overall instrument and ranged from .88 to .91 for the subscales. Conclusion: These results suggest that this needs assessment scale for nursing care in women with infertility demonstrated acceptable validity and reliability and contained items suitable for assessing the level of nursing care needed by women with infertility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.312-312
• /
• 2018

우리나라의 기후 지형적 특성에 따라 연강수량의 50% 이상이 여름철에 내리며 이러한 짧은 기간에 집중적으로 내리는 강수패턴 조건하에서 수공구조물 설계시 대부분 극치빈도분석을 활용한다. 우리나라의 경우 단일 Gumbel 분포를 활용한 극치빈도분석을 많이 이용한다. 하지만, 최근 이상기후로 인하여 전세계적으로 강수패턴의 특징이 급격히 변하고 있으며, 우리나라의 강수패턴 또한 바뀌어가고 있다. 연강수량의 대부분은 태풍과 장마로 인한 강수량으로 이루어져 있고, 일반적으로 두 개의 모집단으로 이루어진 형태를 보인다. 앞선 연구에서 두 개 이상의 첨두를 가지는 형태의 연최대강수량 자료에 대해 8개의 지속시간별(1, 2, 3, 6, 9, 12, 18, 24hr)로 Bayesian 기법의 단일 Gumbel 분포형과 혼합 Gumbel분포형 기반의 극치빈도분석 결과를 비교하였고, 혼합 Gumbel 분포형이 이중첨두 부분의 거동을 효과적으로 모의하는 것을 확인하였다. 본 연구에서는 이상기후로 인한 강수량의 특징의 급격한 변화에 일정한 패턴이 있음을 가정하고 이중첨두의 연 최대일강수량 자료에 대해 혼합 Gumbel 분포형 기반 비정상성 빈도분석을 실시하였다. 정상성 빈도분석과의 비교를 위해 확률분포의 매개변수 산정시 우도함수를 Bayesian 기법을 통해 산정하여 각 분포형의 Bayesian information criterion(BIC) 값을 비교하였다. 비정상성일 경우의 BIC 값이 정상성일 경우 보다 작게 산정되었고, 강수패턴이 경향성을 가지는 것으로 판단할 수 있었다. 비정상성 혼합 Gumbel 분포형 모델은 최근 급격한 강수패턴의 변화에 대한 대응책으로서 활용성이 높을 것으로 기대된다.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.51-70
• /
• 2021

The study aims to evaluate changes in textiles for automotive interior and suggest directions that the textile-development should take in order to achieve sustainability, and enter a circular economy system in the future. The main content and results of the study are as follows: First, we cover the overall sustainability study in the fashion and textile fields; in particular, the certification system is well established through the provision of information on the whereabouts of products to consumers and verification by external environmental auditors. Second, we considered the criteria of C2C in order to derive the necessary criteria for sustainability certification in the field of textiles. Third, we looked at the latest development trends of textile materials for automobile interiors which were divided into three categories: natural originated materials, circular economic consideration materials, and functional supplementary lightweight materials. In addition, we identified to what extent the trend of changes aggregated in the examples was satisfied and what was lacking when applied to the Basic criterion of C2C. As such, this study links and applies the sustainability criteria pursued in the fashion and textile fields to the textile for automotive interior materials, suggesting a direction for the textile field for automotive internal materials in the future. Based on the results of this study, it is hoped that studies on textiles for automotive interior considering the net economy will continue, and practical development in the industry will be realized.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.183-191
• /
• 2019

Objective: The purpose of this study was to compare intended and actual yearly genetic gains for milk production and conformation traits and to investigate the simple selection criterion practiced among milk production and conformation traits during the last two decades in Japan. Learning how to utilize the information on intended and actual genetic gains during the last two decades into the genomic era is vital. Methods: Genetic superiority for each trait for four paths of selection (sires to breed bulls [SB], sires to breed cows [SC], dams to breed bulls [DB], and dams to breed cows [DC]) was estimated. Actual practiced simple selection criteria were investigated among milk production and conformation traits and relative emphasis on milk production and conformation traits was compared. Results: Selection differentials in milk production traits were greater than those of conformation traits in all four paths of selection. Realized yearly genetic gain was less than that intended for milk production traits. Actual annual genetic gain for conformation traits was equivalent to or greater than intended. Retrospective selection weights of milk production and conformation traits were 0.73:0.27 and 0.56:0.44 for intended and realized genetic gains, respectively. Conclusion: Selection was aimed more toward increasing genetic gain in milk production than toward conformation traits over the past two decades in Japan. In contrast, actual annual genetic gain for conformation traits was equivalent to or greater than intended. Balanced selection between milk production and conformation traits tended to be favored during actual selection. Each of four paths of selection (SB, SC, DB, and DC) has played an individual and important role. With shortening generation interval in the genomic era, a young sire arises before the completion of sire's daughters' milk production records. How to integrate these four paths of selection in the genomic era is vital.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.185-195
• /
• 2018

In the Seoul Metropolitan City, the PM(pariculate matter) application used by the citizens provides the PM concentration of the nearest monitoring stations located on the PM monitoring stations. Currently, the selecting method of the PM monitoring network considered by the Ministry of Environment is based on considering the monitoring station distribution and population density only. In this study, we analyzed the distance between PM monitoring station and the administrative center point in addition to the above considerations. The number of test sites was verified and the range of coverage of each monitoring stations was indicated by using the Voronoi algorithm and hexagon grid. The spatial position problem of the PM monitoring station was suggested by spatial data analysis. The variables of spatial data analysis are single-family houses, apartments, $1^{st}$ class neighborhood, $2^{nd}$ class neighborhood, garbage disposal plant, hazardous material disposal facility, factory, and the density map. The analysis result of the selection criterion considering the additional variables for new PM monitoring stations was presented, in addition to the selection criteria provided by the Ministry of Environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.95-108
• /
• 2019

Quality management has become an pervasive philosophy in most sectors of business. Specific movements such as statistical quality control, quality circle, total quality management, and quality management system have become embedded in business organizations. Only the companies with competitive edge can survive in the competition in global market. KSA(Korean Standards Association) established in 1962 has launched all kinds of quality education, quality standard certification service for business, and KNQA(Korean National Quality Award) system. This article considers quality competitiveness excellent company award among KNQA. We performed a statistical analysis of audit data for quality competitiveness excellent company for three years, from 2015 to 2017. By using ANOVA and two sample t-tests, the average scores of 13 evaluation fields were significantly different depending on company size and type. We proposed ways to improve the current hall of fame system. We discovered that the average scores of 13 evaluation fields in the audit data according to years and hall of fame status were not significantly different. We also showed linear relationships among 13 evaluation fields by correlation analysis and obtained an estimated linear regression equation : Business Performance, which is a comprehensive index, as a dependent variable was significantly related to Customer Focus and Product Liability as regressor variables among 13 evaluation fields by regression analysis.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.380-388
• /
• 2019

Jet engine modulation(JEM) signals are widely used for target recognition. These signals coming from a potentially hostile aircraft provide specific information about the jet engine. In order to obtain the number of blades, which is uniquely provided by the JEM signal, one must extract the spool rate, which is the rotation speed of the blades. In this paper, we propose an algorithm to extract the spool rate from a weak JEM signal. A criterion is developed to extract the spool rate from the JEM signal by analyzing the intensity of the JEM signal component. The weak signal is first subjected to a high-pass filtering-based process, which modifies it to facilitate spool rate extraction. We then apply a peak detection process and extract the spool rate. The technique is simpler than the existing CEMD or WD method, is accurate, and greatly reduces the time required.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.128-138
• /
• 2019

In this paper, we present fusion methods for two different lofargrams. Since the conventional method synthesizes the lofargrams using frequency spectrum, it has limited performance in fusion of tonal signals which have two-dimensional information of the time-frequency domain. Proposed algorithm uses a two-dimensional directional bilateral filter for preprocessing and fuses two lofargrams based on comparison of local anisotropy of the lofargrams. After noise is suppressed and tonals are sharpened, the local anisotropy can be used as a criterion to divide tonals and noise. The experiment results using simulated data and real data showed that the proposed algorithms result in similar or lower noise level of the fused lofargram than conventional algorithms and decrease tonal omission in fusion process.