• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.118-127
• /
• 2010

Current TCP/IP-based Internet architecture has been used for over 30 years, however it will confront with fundamental problems due to new protocol extension limitation since communication environments will change drastically and various user requirements will be emerging in near future. To solve these problems, major countries have started Future Internet researches based on clean slate approach and they will deploy large-scale testbed to experiment and verify new functions. OpenFlow switch technology has been proposed as a new experimental technology for independent protocol that can utilized the legacy network devices and does not interfere with the production Internet traffic. Korea also started Future Internet testbed project called FIRST and OpenFlow switch with NetFPGA card will be used to deploy this testbed. To interconnect distributed testbed using OpenFlow switches, logical tunnel should be established by encapsulating MAC frame inside a unicast IP packet between OpenFlow switches because OpenFlow switches are not directly connected. In this paper, we have implemented a NetFPGA-based that performs MAC in IP tunneling between various OpenFlow switch sites implemented in domestic research network KOREN. The performance evaluation shows that the NetFPGA-based capsulator reveals better performance than the software-based tunneling and it can be utilized as a testbed for experimentation of Future Internet technologies.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.64-72
• /
• 2008

Researchers nowadays are trying to implement u-Healthcare (ubiquitous Healthcare) systems for real-time monitoring and analysis of patients' status through a low-cost and low-power wireless sensor network. u-Healthcare system has an aim to provide reliable and fast medical services for patients regardless of time and space by transmitting to doctors a large quantity of vital signs collected from sensor networks. Existing u-Healthcare systems can merely monitor patients' health status. However, it is not easy to derive physiologically meaningful results by analyzing rapidly vital signs through the existing u-Healthcare systems. We introduce a Grid computing technology for deriving the results by analyzing rapidly the vital signs collected from the sensor network. Since both sensor network and Grid computing use different protocols, a gateway is needed. In addition, we also need to construct a gateway which includes the functions such as an efficient management and control of the sensor network, real-time monitoring of the vital signs and communication services related to the Grid network for providing u-Healthcare services effectively. In this paper, to build an advanced u-Healthcare system by using these two technologies most efficiently, we design and present the results to implement a SensorGrid gateway which connects transparently the sensor network and the grid network.

• Communications of Mathematical Education
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2020

Today's healthcare, intelligent robots, smart home systems, and car sharing are already innovating with cutting-edge information and communication technologies such as Artificial Intelligence (AI), the Internet of Things, the Internet of Intelligent Things, and Big data. It is deeply affecting our lives. In the factory, robots have been working for humans more than several decades (FA, OA), AI doctors are also working in hospitals (Dr. Watson), AI speakers (Giga Genie) and AI assistants (Siri, Bixby, Google Assistant) are working to improve Natural Language Process. Now, in order to understand AI, knowledge of mathematics becomes essential, not a choice. Thus, mathematicians have been given a role in explaining such mathematics that make these things possible behind AI. Therefore, the authors wrote a textbook 'Basic Mathematics for Artificial Intelligence' by arranging the mathematics concepts and tools needed to understand AI and machine learning in one or two semesters, and organized lectures for undergraduate and graduate students of various majors to explore careers in artificial intelligence. In this paper, we share our experience of conducting this class with the full contents in http://matrix.skku.ac.kr/math4ai/.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.396-403
• /
• 2009

An anonymous asymmetric fingerprinting protocol combined with watermarking techniques, is one of the copyright protection technologies keeping both right of a seller and that of a buyer, where a seller and an anonymous buyer perform such a protocol that employs various cryptographic tools in order that the seller does not know the exact watermarked copy that the buyer receives, while inserting an invisible non-removable fingerprint i.e., each different unique watermark, into each copy of the digital content to be sold. In such a protocol innocent buyers are kept anonymous during transactions, however, the unlawful reseller is unambiguously identified with a real identity as a copyright violator. In 2007, Yong and Lee proposed an anonymous asymmetric fingerprinting scheme with trusted third party. In this paper we point out the weakness of their scheme such as: the buyer with intention can remove the fingerprint in the watermarked content, because he/she can decrypt the encrypted fingerprint with a symmetric key using man-in-the-middle-attack; a real identity of a buyer can be revealed to the seller through the identification process even though he/she is honest. Furthermore, we propose an improved secure and efficient anonymous asymmetric fingerprinting scheme which enables to reduce the number of communication between the participants.

• Korean Security Journal
• /
• no.51
• /
• pp.173-195
• /
• 2017

Recently, in South Korea, security management has been strengthened, but there have been an increasing number of cases where the main infrastructure of the country is hacked in the cyber space. South Korea is equipped with sophisticated information and communication technologies, such as Internet, but is threatened by cyber terrorism of North Korea and terrorist organizations. Nevertheless, there is a limit to how to develop a policy and strategic plan for the country, which is related to domestic terrorism and lacks legal and regulatory facilities, and therefore, in this study, proposed suggestions for building adaptive and efficient policy formulation. Based on the theoretical analysis framework of the Strategic Plan for achieving the objectives of the research, we compared the UK 's security strategy with the national security policy of the domestic government. As a result, several problems were derived: First, the domestic security strategy did not take into account the external environment. Secondly, lack of coordination with domestic cyber security goals setting and strategy is causing ambiguity and confusion. Third, the detailed plan of implementation of national security in each province is designed to ensure that there is a possibility that a mixed side effect between ministries and agencies will arise. Fourth, it was found that there was a limit to prepare the evaluation standards for the evaluation and return of domestic security policies in the country. Therefore, in order to establish a policy for the response of domestic cyber terrorism, we set up a vision from long-term perspectives and concrete targets based on the strategic approach of the security policy, It is necessary to present an assignment and formulate an efficient execution plan. It is necessary to maintain and improve the domestic safeguards in order to be able to complement the problems through evaluation and feedback.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.984-997
• /
• 2015

Chang'e-3 consisting of a lunar lander and exploration rover was launched on December 1, 2013 aboard a Long March 3B rocket flying from Xichang space launch center. Chang'e-3 was inserted into the lunar orbit after about a 5-day transit to the Moon and landed on the targeted landing site after orbiting around the Moon for 8 days. The successful landing of the Chang'e-3 gives a lot of help to analyze the future needs of the subsystem technologies and to figure out the trajectory from launch to lunar landing as well as operation sequences in the development of Korean lunar exploration is scheduled. Therefore, the configuration and analysis of overall mission of Chang'e-3 is performed based on the public information from the press and website. As a result, overall mission trajectory is reconstructed by solving boundary condition and then estimating control variable. Visibility status and eclipse status also analyzes so communication and power charge condition is as good as to operate lunar lander. Mass budget of the lander is derived using ${\Delta}V$ according to specific impulse.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.19-31
• /
• 2016

With the development of information and communication technologies, a new paradigm in higher education is required. Accordingly, establishing a smart campus has emerged as an important issue in universities worldwide. This study aims to discuss key issues and to provide useful academical and practical implications on smart campus by reviewing related literatures. For this purpose, this study examined recent literatures on smart campus by four research perspectives; 1) learning/knowledge-centric approach, 2) technology-centric approach, 3) integrated approach, and 4) user-centric approach, then developed smart campus framework. Smart campus user criteria contained members of university as well as local community and business stockholders. Smart campus framework presented specific service areas each belongs to smart education, smart life and smart administration domains and motivating factors of using smart campus. Moreover, by considering key issues and problems raised in previous studies, this study suggested practical implications for successful development of smart campus.

• Strategy21
• /
• s.46
• /
• pp.205-238
• /
• 2020

The origin of mission command can be traced to the era of the Prussian military reforms led by General Gerhard von Scharnhorst after defeats in battle of Jena and Auerstadt in 1806 against Napoleon I. Mission Command is the conduct of military operations through decentralized execution based upon mission-type orders. Commanders issue mission-type orders focused on the purpose of the operation rather than details of how to perform assigned tasks. The mission command has become the command philosophy of the German military and recently many countries in the west accept it as a command philosophy. This study compare and analyze the Battle of St. Vincent and the Battle of Jutland to make sure if the army-initiated mission commands were also useful for the navy. From the late 18th century, represented by the era of Nelson, Royal navy changed from the inherited rigid command culture to guaranteeing the disciplined initiative of its subordinate commanders. In the Battle of St. Vincent in 1797, Nelson acted contrary to the commander's orders at the crucial moment, which gave Britain a decisive victory. On the contrary more than 100 years later, the command culture of the Royal navy changed into a centralized command culture. In the Battle of Jutland in 1916, Royal Navy couldn't win because the rigid command culture did not guarantee initiative of subordinate commanders and subordinate commander's passive attitude of waiting for the commander's instructions even at critical moments. Therefore, a mission command that guarantees the initiative of subordinate commanders is a useful concept even in the navy because it makes subordinate commanders to take full advantage of a sudden change in battle. Today's advanced information and communication technologies have raised questions about mission command. But even advanced technology can't completely eliminate the fundamental nature of the war-the fog of war. War is chaotic and unpredictable. In the flood of lots of informations, senior commander's judgement is not always right because he(she) is also human, he(she) can make mistakes. In the age of informatization, mission command is still effective because it involves increasing interaction and synergy between senior and subordinate commanders by ensuring their independence. Therefore ROK navy also needs to activate mission command. ROK navy must dismantle the zero-defect mentality and apply from educations as Prussian did to establish a mission command culture.

• Journal of Korea Water Resources Association
• /
• v.53 no.spc1
• /
• pp.813-826
• /
• 2020

This study analyzes the effects of the Smart Water City (SWC) project that was introduced from 2014 to 2016 in Paju City, Gyeonggi Province, Korea, focusing on the achievement of the business goals. The SWC is referred to as a city that embraces a healthy water supply system based on Smart Water Management (SWM) that promotes the efficiency of water management by combining Information and Communication Technologies (ICTs) with water and sewerage facilities. In order to evaluate the effectiveness of the SWC project, this study deploys evaluation criteria corresponding to the project objectives, and analyzes the outputs before and after the project. The results show that the SWC has contributed to enhancing water supply services and the reliability and drinking rate of tap water. Specific improvement areas include the rise of average water flow rate and water leakage reduction, the diffusion of water quality monitoring system, and the reduction of floating particle concentration and turbidity in drainage pipes was achieved. These were possible because of specific implementation plans for clear goal setting and achievement and active services for citizens. The data related to water quantity and quality showed improved performance compared to before the introduction of SWMS, which is a positive effect. However, a quantitative analysis of the outputs has limitations in identifying other external factors that have led to the changes. In the future, guidelines for spreading SWC and more comprehensive and specific evaluation indicators for SWC should be prepared, and SWMS should be developed in consideration of the needs of users.