• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.53-59
• /
• 2016

Bacterial fruit blotch(BFB) of cucurbits caused by Acidovorax citrulli(Acc) continues to diminish fruit yields. The aim of this study was to address whether two genetically distinct populations of Acc are present in watermelon-growing fields in Korea. For this purpose, we used the enterobacterial repetitive intergenic consensus polymerase chain reaction(ERIC-PCR) profiling and substrate-utilization profiles. According to the results of ERIC-PCR, group I and II strains showed clearly differentiated PCR-based fingerprinting profiles. Differences between group I and II strains included amplification of unique, group-specific DNA fragments such as the 1.3-, 0.28-, and 0.25-kb fragments in ERIC-PCR. Acc stains belonging to group I did not use L-leucine, whereas group II strains did use the substrate. Our results support the genetic differentiation of Acc strains into two groups and demonstrate that Acc strains from both groups are previously existed in watermelon-growing fields in Korea. Information about the genetic diversity of Acc under the present study will help scientists and managers form strategies to control BFB.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.207-214
• /
• 2023

Lindera obtusiloba (Lauraceae) is a dioecious tree that is widely distributed in the low-altitude montane forests of East Asia, including Korea. Despite its various pharmacological properties and ornamental value, the genetic diversity and population structure of this species in Korea have not been explored. In this study, we selected 6 nuclear and 6 chloroplast microsatellite markers with polymorphism or clean cross-amplification and used these markers to perform genetic diversity and population structure analyses of L. obtusiloba samples collected from 20 geographical regions. Using these 12 markers, we identified a total of 44 alleles, ranging from 1 to 8 per locus, and the average observed and expected heterozygosity values were 0.11 and 0.44, respectively. The average polymorphism information content was 0.39. Genetic relationship and population structure analyses revealed that the natural L. obtusiloba population in Korea is composed of 2 clusters, possibly due to two different plastid genotypes. The same clustering patterns have also been observed in Lindera species in mainland China and Japan.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.1-8
• /
• 2007

This study was focused on discriminating the molecular sexes of red deer and elk by duplex polymerase chain reaction(PCR) using two primer sets. Sex differentiation of mammals is primarily dependent on the presence or absence of sex determining region Y(SRY) gene encoded on Y chromosome which plays a key role for male development. Zinc finger X-Y(ZFX-ZFY) gene, one of X-Y homology gene group was found on X- and Y- chromosomes, respectively. At first, the nucleotide sequences were characterized for the intron 9 flanking region of ZFX-ZFY genes. The intron 9 of ZFX and ZFY is 529-bp and 665-bp in length, respectively. A transposable element sequence similar to bovine SINE element Bov-tA was detected only in ZFY gene of Cervidae. Sexing analysis was conducted by duplex PCR assay for amplification of SRY and ZFX-ZFY genes. Two differentially amplified patterns were found: one for females has a common band amplified only from ZFX as a template, and another for males had three bands(a common ZFX and two male-specific ZFY and SRY). On the separate tests using each gene, the results was identical to those from duplex PCR assay. Moreover, the results from PCR assays provide also identical information to phenotypic investigation of individuals of red deer, elk as well as their hybridized progenies collected from two isolated farms. These results suggest that it may be a rapid and precise method for determining the sexes by duplex PCR amplification using Y-chromosome specific SRY and X- and Y- homologous ZFX-ZFY genes showing sexual dimorphism in red deer and elk without any other controls.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.213-219
• /
• 2004

In this paper, a LNA(Low Noise Amplifier) has been developed, which is operating at L-band i.e., 1452∼1492 MHz for satellite DAB(Digital Audio Brcadcasting) receiver. The LNA is designed to improve input and output reflection coefficient and VSWR(Voltage Standing Wave Ratio) by balanced amplifier. The LNA consists of low noise amplification stage and gain amplification stage, which make a using of GaAs FET ATF-10136 and VNA-25 respectively, and is fabricated by hybrid method. To supply most suitable voltage and current, active bias circuit is designed Active biasing offers the advantage that variations in $V_P$ and $I_{DSS}$ will not necessitate a change in either the source or drain resistor value for a given bias condition. The active bias network automatically sets $V_{gs}$ for the desired drain voltage and drain current. The LNA is fabricated on FR-4 substrate with RF circuit and bias circuit, and integrated in aluminum housing. As a reults, the characteristics of the LNA implemented more than 32 dB in gain. 0.2 dB in gain flatness. lower than 0.95 dB in noise figure, 1.28 and 1.43 each input and output VSWR, and -13 dBm in $P_{1dB}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.547-555
• /
• 2008

This parer proposed the path mismatch detection and compensation algorithm with closed form for linear amplification with non-linear components(LINC) system implementation. The LINC system has a merit of using the high efficient amplifier by transferring the non-constant envelop signal which is high peak to average signal ratio into constant envelop signal. However, the performance degradation is very sensitive to the path mismatch such as an amplitude mismatch and a phase mismatch. In order to improve the path mismatch, the error detection and compensation method is introduced by the use of four test signals. Since the presented method has the closed form solution, the efficient and fast detection is available. The digital-IF structure of LINC system applied by the proposed error detection and compensation algorithm was implemented. The performance was evaluated with the IEEE 802.16 WiMAX baseband sinal which has 7 MHz channel bandwidth and 16-QAM. The Error Vector Magnitude(EVM) of -37.37 dB was obtained through performance test, which meets performance requirement of -24 dB EVM. As a result, the introduced error detection and compensation method was verified to improve the LINC system performance.

• Weed & Turfgrass Science
• /
• v.4 no.1
• /
• pp.18-25
• /
• 2015

A universal DNA barcoding for agricultural noxious weeds is a powerful technique for species identification without morphological knowledge, by using short sections of DNA from a specific region of the genome. Two standard barcode markers, chloroplast rbcL and matK, and a supplementary nuclear ribosomal Internal Transcribed Spacer (ITS) region were used to examine the effectiveness of the markers for Pooideae barcoding using 163 individuals of 29 taxa across 16 genera of Korean Pooideae. The rbcL and ITS revealed a good level of amplification and sequencing success while matK did not. Barcode gaps were 78.6% for rbcL, 96.2% for matK, and 91.7% for ITS, respectively. Resolving powers were 89.3% for rbcL, 92.3% for matK, and 79.1% for ITS. The matK obtained the best both barcode gap and resolving power. However, it should be considered not to employ matK for Pooideae barcode because of low rate of PCR amplification and sequencing success. As a single DNA marker, rbcL and ITS were reasonable for Pooideae barcode. Barcode gap and resolving power were increased when ITS was incorporated into the rbcL. The barcode sequences were deposited to the National Center for Biotechnology Information (NCBI) database for public use.

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.163-168
• /
• 2005

The objective of this study was to produce superior cows by sexual distinction of embryos collected from the donor with pedigree information. Collected embryos distinguished by biopsy using punching or bisection methods and Loop-mediated isothermal amplification of sex-determined DNA for sexing. Six embryos predicted as female were transplanted to recipients and then 2 pregnant cows were normally delivered of calves at 278 and 285 days after embryo transfer. Birth weights of calves named Barani and Borani were 18kg and 25kg, respectively. Adjusted body weights for 90 days were 61.1kg and 88.8kg, respectively. Average daily gains were 0.48kg and 0.71kg, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.33-41
• /
• 2000

Pyroelectric characteristics such as voltage responsivity, noise equivalent power and detectivity are modeled 3-dimensionaly considering th interaction of each parameters. Also, the circuit is designed to set up the frequency band width and the signal amplification of the pyroelectric IR sensor. The case of low frequency region shows that the voltage response increases with the independence of the sensor area as the thickness decreases. In the high frequency region, it is found that the voltage response with the load resistor of 20$G{\Omega}$ increases with the independence of the sensor thickness as the sensor area decreases. In the low frequency region, the detectivity becomes excellent at th load resistor of 20$G{\Omega}$, the sensor area larger than $4{\times}10^{-10}m^2$ and the sensor thickness thinner than $1{\times}10^{-5}m$, while, in the high frequency region, it shows high value at the sensor thickness thinner than $1{\times}10^{-5}m$ and the sensor area smaller than $2{\times}10^{-10}m^2$ with the independence of the load resistor. In the circuit design, quasi-boot-strap circuit is employed, in which a single op-amp is connected to the drain of JFFT. Desirable frequency band width, amplification rate and the remarkable drop of noise of about 56% from that of conventional circuits with double op-amps are obtained.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.302-310
• /
• 2019

Precise and fast identification of crop cultivars is essential for efficient breeding and plant breeders' rights. Traditional methods for identification of jujube cultivars are based on the evaluation of morphological characteristics. However, due to time constraints and environmental influences, it is difficult to distinguish cultivars using only morphological traits. In this study, we cloned fragments from improved inter simple sequence repeats (ISSR) analysis, and developed stably diagnostic sequence-characterized amplified region (SCAR) markers. The specific ISSR bands of jujube cultivars from Dalizao and Boeundaechu were purified, cloned, and sequenced. As a result, four clones labeled 827Dalizao550, 827Boeun750, 846Boeun700, and 847Dalizao850 were identified. In order to investigate whether they were specific for the jujube cultivar, four pairs of SCAR primers were then designed and polymerase chain reaction (PCR) amplifications were conducted to analyze 32 samples, including jujube and sour jujube. In the PCR amplification of the 827Dalizao550 SCAR marker, the specific bands with 550 bp were amplified in six samples (Dalizao, Sandonglizao, Dongzao, Yuanlin No. 2, Suanzao 2, Suanzao 4), but unexpected bands (490 bp) were amplified in the others. Moreover, in the PCR amplification of the 847Dalizao850 SCAR marker, the specific bands with 850 bp were found in three samples (Dalizao, Sandonglizao, and Dongzao) and 900 bp unexpected bands were amplified in five samples (Pozao, Suanzao 1, Suanzao 2, Suanzao 3, Suanzao 4). These results showed that newly developed markers could be useful as a fast and reliable tool to identify jujube cultivars. However, further identification of polymorphic information and the development of SCAR markers are required for the identification of more diverse cultivars.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.211-219
• /
• 2010

The design concept of high speed railway bridges is applied to a method for increasing the stiffness of existing bridge structures considering the impact factor by a static load. Generally, the process of structural design would be relied upon an advanced foreign technology. However, the dynamic amplification factor (DAF) and dynamic capacity assessment of high speed railway bridges may be conducted essentially a detailed estimation because the resonance phenomenon is affected by the long length (380 m) and high speed (300 km/h) moving of a high speed railway (Korea Train eXpress: KTX). Therefore, this study will be examined the dynamic capacity of the typical PSC Box Girder high speed railway bridge efficiently, and offered the basic information for the reasonable structural design. For this, the static analysis is conducted considering the load line diagram of KTX based upon existing references. In addition, the KTX moving load is transformed into the time series load considering various analytical variables. The time history analysis is assessed reasonable using the transformed time series load. At that time, analytical variables for calculating the time series load are considered loading node distance, time increment and KTX velocity variation etc. The dynamic capacity of the PSC Box Girder high speed railway bridge is examined based upon the FE analysis result systematically. The structural safety is assessed quantitatively in accordance with the related regulation of the inside and outside of the country.