• Carbon letters
• /
• v.7 no.2
• /
• pp.97-104
• /
• 2006

The influence of carbon surface area, carbon-oxygen groups associated with the carbon surface and the solution pH on the adsorption of Pb(II) ions from aqueous solutions has been studied using three activated carbons. The adsorption isotherms are Type I of BET classification and the data obeys Langmuir adsorption equation. The BET surface area has little effect on the adsorption while it is strongly influenced by the presence of acidic carbon oxygen surface groups. The amount of these surface groups was enhanced by oxidation of the carbons with different oxidizing agents and reduced by eliminating these groups on degassing at different temperatures. The adsorption of Pb(II) ions increases on each oxidation and decreases on degassing the oxidized carbons. The increase in adsorption on oxidation has been attributed to the formation of acidic carbon-oxygen surface groups and the decrease to the elimination of these acidic surface groups on degassing. The adsorption is also influenced by the pH of the aqueous solution. The adsorption is only small at pH values lower than 3 but is considerably larger at higher pH values. Suitable mechanisms consistent with the adsorption data have been suggested.

• Tribology and Lubricants
• /
• v.25 no.2
• /
• pp.120-124
• /
• 2009

In automobile chassis system, several environmental factors weaken durability of automobile's components. The environmental factors are temperature, humidity, intensity of radiation and dust particle inflow. Especially, dust particle inflow leads to increase in friction and wear of automobile's components. The wear of automobile's component leads to increase in noise and exerts a bad influence on life of components. In this study, dust particles were investigated for study on the influence of dust particle inflow. Dust particles are collected on urban area, rural area and highway in China. The size of dust particle is analyzed using the image plus program, and the element of dust particle is analyzed using the SEM and EDX. The elements of dust particle are $SiO_2$ and $Al_{2}O_{3}$. The other elements(Na, Ca, Cl etc..) are detected on urban area and highway.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.952-958
• /
• 2011

The primary purposes of this study were to investigate on effect of consumer's participation on their emotional response, service quality perception and revisiting intention in the beauty service field. The data were collected from 385 customers of beauty salons in Busan area, Gimhae area in Kyongnam and Daegu area. It was analyzed by frequency analysis, factor analysis, reliability analysis, and path analysis. The results were as follows: First, consumer was experienced positive emotion toward their participation of service offering course. Second, there were significant influence their participation on their service quality perception. And in the case mediating emotional response, their were more influence. Finally, consumer was perceived positively service quality when they was experienced positively emotion in service field during service offering course. And they had revisiting intention when they was perceived service quality excellently.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1922-1928
• /
• 1999

Rotary bending fatigue tests were carried out to investigate the influence of artificial defects on fatigue limit in annealed and austempered ductile iron. Obtained main results are as follows : (1) Artificial defect(micro hole type, dia.<0.4 mm) on specimen surface did not bring about a obvious reduction of fatigue limit in austempered ductile iron(ADI) as compared with annealed ductile iron. (2) According to the investigation of $\sqrt{area}_c$ which is the critical defect size to crack initiation at artificial defect, $\sqrt{area}_c$ of ADI is larger than that of annealed ductile iron. This shows that the situation of crack initiation at artificial defect in ADI is more difficult in comparison with annealed ductile iron. (3) One of the reasons for the low rate of crack initiation from artificial defect in ADI is that the resistance of matrix to crack initiation is higher than that of annealed ductile iron. (4) In case that the $\sqrt{area}$ of artificial defect and graphite nodule is the same, the rate of crack initiation from graphite nodule is higher than that from artificial defect. This reason is that the serious ruggedness around graphite nodule is formed by austempering treatment.

• Journal of the Korean housing association
• /
• v.14 no.6
• /
• pp.69-77
• /
• 2003

The environmental problems aren't only restricted in single area or country, but also related in all around the world. Various approaches have been tried to protect and utilize properly the environment. Especially, building area has been attempted to provide the model which could explain the degree of environmental influence and technology development criteria to lessen the environmental impact in building life cycle. The environmental impact in the building life cycle can be overally explained with sustainability. Sustainability can be utilized to establish the target level of building to environmental influence. This paper aimed at extracting items to evaluate the building sustainability, divided into social, economic and environmental aspects. First, 93-items is extracted from 3 areas through existing literature review. Second, the 93-items would be controlled and reviewed into 21 items, which are five social aspect items, two economic aspect items and twelve environmental items, because 93 items can not properly be applied and evaluated. And, it provided the model to combine the extracted items of each area. In social aspect, the outdoor noise is more affect than any other items. In environmental aspect, the item of surface-to-volume is more affect than any other items.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.101-108
• /
• 2014

The performance of the daylighting in buildings depends on building site and shape. As an energy saving design strategy, daylighting is a key issue in green building design. In this paper, the influence of the adjacent or obstructed building on daylighting performance of the office building in urban area was analyzed. A typical office building about 20 storeys with obstructed buildings has been modeled and simulated using Radiance. The parametric simulations have been performed to analyze the influence of the daylighting performance (illuminance, luminance) of the analyzed office. The results show that the possibility of the glare was decreased when the obstructed building is located in south, also the illuminance level was significantly decreased. When the obstructed building is located in north, the changes of the illuminance level and luminance possibility were somewhat small compared to the unobstructed condition. The daylighting performance of the analyzed building was most affected by the obstructed building in winter season.

• Journal of Environmental Science International
• /
• v.14 no.7
• /
• pp.629-637
• /
• 2005

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were investigated in soil and pine needle samples taken from 16 sites of industrial and residential areas in Changwon, Korea to assess their distribution levels and to suggest the influence of industrial activities, PCDDs/DFs levels in the soil samples ranged from 0.57 to 20.79 pg I-TEQ/g dry weight with a mean value of 4.20 pg I-TEQ/g dry weight. PCDDs/DFs levels in the pine needle samples ranged from 0.39 to 8.75 pg I-TEQ/g dry weight with a mean value of 4.09 pg I-TEQ/g dry weight. In both soil and pine needle samples, the PCDDs/DFs concentrations in the industrial area sites were higher than those in the residential area sites. Homologue profiles in pine needle samples showed different patterns compared with soil samples. Based on the results of principal component analysis (PCA), it was confirmed that pine needles reflected a direct influence from local potential sources of PCDDs/DFs, showing a much higher degree of reflection than in soils. Pine needles are very useful as an indicator for monitoring or estimating the contamination of PCDDs/DFs in other areas which have been impacted by point pollution sources.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.816-822
• /
• 1996

Dependence of graphitic structure on oxidation of carbon materials was discussed using furan resin-derived carbon with inorganic compounds such as SiC and TiO2 Oxidation of carbon was governed by active site. I. e surface area regardless of the degree of graphitization. When oxidation was considered for not unit weight but unit area graphitization was important factor for oxidation so that the degree of graphitization increased the oxidation rate was delayed. Graphite (tiO2 addition) and turbostratic graphite(SiC addition) were oxidized through the same mechanism. In carbon materials with different structure components more than 2 oxidation of each component was different and amorphous component without the influence of additives on the surface was selectively oxidized in the intial oxidation stage.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.105-121
• /
• 2004

The purpose of this study is to investigate the relationship between petrographical and engineering properties of granitic rocks, widely used as building and ornamental stones in Korea, at the Namwon are a. This area is one of the most famous area as a domestic dimension stone production. The granitic rocks were examined for grain sizes, modal compositions and then same samples were tested to determine specific gravity, water absorption, porosity, uniaxial compressive strength, tensile strength, abrasive hardness, P-wave velocity, modulus of elasticity and Poisson's ratio. It is suggested that the influence of the grain size on the engineering properties is more important than that of the mode of mineralogical compositions. And quartz contents also significantly influence the engineering properties of granitic rocks.

• The Research Journal of the Costume Culture
• /
• v.19 no.6
• /
• pp.1247-1258
• /
• 2011

This study aimed to clarify the relationships among the characteristics of consumers and their influence on fashion leadership. Two kinds of variables were investigated in this study: centrality of visual product aesthetics and consumer innovativeness as personal characteristics, and role-relaxed consumption and consumer susceptibility to interpersonal influence as interpersonal characteristics. Data were gathered by surveying university students in the Seoul metropolitan area, using convenience sampling, and 322 questionnaires were used in the statistical analysis. In analyzing data, correlation analysis, factor analysis, and regression analysis were conducted. Factor analysis on the centrality of visual product aesthetics revealed three sub-factors: value, acumen, and response intensity. Meanwhile, factor analysis for consumer susceptibility to interpersonal influence revealed two sub-factors: informative and normative conformities. However, consumer innovativeness, role-relaxed consumption, and fashion leadership revealed only one factor. Regression analysis showed that visual product aesthetics, especially acumen and response intensity, were the most influential factors; furthermore, consumer innovativeness and normative conformity had positive influence on fashion leadership. However, role-relaxed consumption had negative influence on fashion leadership.