• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.770-774
• /
• 2003

The effects of pH and/or NaCl concentration on the Fat Binding Capacity (FBC) of rhamnolipid and the physical properties of surimi gel containing rhamnolipid were investigated. The FBC of rhamnolipid was measured 162% of value at pH 7 and 0% NaCl concentration. The whiteness of surimi gel containing rhamnolipid significantly (p< 0.05) lower than control. In contrast, surimi gel containing rhamnolipid compare with control were enhanced significantly(p < 0.05) breaking force and deformation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.277-278
• /
• 2012

After the introduction of CM(construction management) for improving productability in construction industry, the CM market was shown to actively grow shape until 2007 but suddenly appears passive movement of the market after in 2008. However, on one hand, the CM corporations has increased, because the construction supervision market come to the CM market area by reduction their work place. Because of this, it was discussed that will intensify competition between companies in the CM market. Therefore, this paper want to analyze to status of the CM market structure for studying about the CM industry status and change during last 3 years. As a result, by decreasing the Market concentration, the CM market competition rate did not too high with business despite that CM market downsize and has been increased the number of companies.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.247-252
• /
• 2003

This study is to research on two phase printing method by use of colorants extracted from sappan wood. As for the research, printing effect of printing paste, streaming time, optimal mordant concentration, change of surface color and colorfastness were measured. This experiment showed that modified starch were best on surface color among the modified starch, sodium-alginate, guar gum. And the surface color was best when the steaming time was 60 minutes, mordant concentration 8%(ow.f). And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.239-245
• /
• 2003

This study is to research on printing method by use of colorants extracted from Sappan wood. As for the research, the stability of paste added by mordants, steaming condition, optimal mordant concentration, change of surface color and colorfastness were measured. The experiment showed that guar gum were stability among the sodium-alginate, modified starch, guar gum. And the surface color was best when the streaming time was 60 minutes, mordant concentration 3g/l. And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.73-79
• /
• 2016

Hexeneuronic acid in soda-anthraquinone(AQ) pulps from Moso bamboo(Phyllostachys pubescebs), Timber bamboo(Phyllostachys bambusoides) and Henon bamboo(Phyllostachys nigra var. henonis) was investigated with mercuric chloride hydrolysis and UV spectroscopic quantification. Concentration of hexeneuronic acid in bamboo pulps was $36.6-45.4{\mu}mol/g$, which contributed to 3.1-3.9 value increase of kappa number. Lower concentration of 4-O-methylglucuronic acid in bamboo xylan contributed to lower hexeneruonic acid content in bamboo pulps than those of hardwood(yellow poplar or eucalyptus) but higher than softwood(red pine).

• 펄프종이기술
• /
• 제31권3호
• /
• pp.10-18
• /
• 1999

The influence of simple electrolyte or anionic trashes on cationic starch adsorption was examined using deinked pulp and bleached thermomechniical pulp. Adsorbed amounts of cationic starches increased slightly , then decreased abruptly as the concentration of simple electrolyte increased. This phenomenon was discussed based on the compression of electrical double layer and conformation change of starch molecules. Also, the effect of the type of simple electrolytes on starch adsorption was examined and discussed. Addition of sodium slilicate increased starch adsorption since it increased surface charge density of fibers. On the other hand, addition of kraft lignin decreased cationic demand of the pulp slurries and adsorbed amounts of cationic starches. Nonionic surfactant did not show any significant effect on the cationic demand of pulp slurries. When simple electrolytes were added to the stock , grater adsorption or cationic starches was obtained with starches of lower degree of substitution . On t도 other hand, amount of adsorbed starches decreased for lower DS starches when the concentration of anionic trashes increased.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.277-289
• /
• 2003

This study proposes a mathematical model to characterize the removal of nitrogen oxides in a dielectric barrier discharge plasma process. As well as the reactions between nitrogen oxides, water vapor, oxygen and nitrogen, the model takes into account the effect of ethylene often used as a chemical additive to reduce the power consumption of the process on the removal of nitrogen oxides. Since the concentrations of the radicals concerned in the main reactions including O, OH, H and N should be calculated to predict the removal efficiency of nitrogen oxides, they were theoretically derived. The parameters affecting the removal of nitrogen oxides, such as initial concentration, discharge power, humidity, and ethylene concentration were experimentally evaluated, which were compared with the calculated results to verify the validity of the model proposed. The predicted concentrations of several byproducts formed in this process were also presented and discussed. The effects of several parameters mentioned above on the removal of nitrogen oxides were reasonable described by the proposed model.

• 한국산업융합학회 논문집
• /
• 제9권3호
• /
• pp.229-233
• /
• 2006

The water vapor permeability of polypropylene spun bond non-woven fabrics were investigated with the water vapor permeability velocity at $20^{\circ}C$, $30^{\circ}C$ and $40^{\circ}C$ by applying the hygroscopic method. At each temperature 50, 65 and 80 %RH conditions were used. The results indicated that the water vapor permeability velocity increased with increasing the water vapor concentration difference between both sides of sample surfaces and it decreased with increasing the number of the piled-up fabrics and the apparent density.

• 한국산업융합학회 논문집
• /
• 제19권2호
• /
• pp.95-100
• /
• 2016

This study proposes the temperature compensation algorithm using thermopile detector for non-dispersive infrared Nitrogen gas sensor. From the output voltage of thermistor that is attached onto the infrared detector, the ambient temperature was extracted. The effects of temperatures on the properties of sensor module characteristics of narrow bandpass filter, optical cavity and infrared lamp, and air mixing gas have been introduced in order to implement the temperature compensation algorithm.

• 방사선산업학회지
• /
• 제4권3호
• /
• pp.247-252
• /
• 2010

The present study has been performed to select the osmotic tolerant lines using polyethylene glycol (PEG 6000) through an in vitro and in vivo mutagensis with a gamma-ray. During the screening, we selected three mutant lines that seemed to confer elevated osmotic tolerance in high concentrations of PEG 6000. Fruits of these mutants (Os-HK101, Os-HK102 and Os-HK103) were increased to sugar concentration, L-glutamine acid, vitamin C content and lycopine content than those of the wild type. Also the chlorophyll contents were few decreased more in the three mutant lines than the WT plants. Our results suggest that the Os-HK101 is characterized as osmotic stress tolerance considering the sugar concentration and lycopine content. It is expected that the result of this study can be used for breeding more competitive species with respect to contents in sugar or functional chemicals from the selected osmotic resistant lines.