• Title/Summary/Keyword: Industry Correlation Analysis

Search Result 952, Processing Time 0.025 seconds

A Study on the Impact of Human Factors for the Students Pilot's in ATO -With Respect to Korea Aviation Act and ICAO Human Factors Training Manual- (항공법규에 의거 지정된 조종사 양성 전문교육기관의 학생조종사에 대한 휴먼팩터 영향 연구)

  • Lee, Kang-Seok
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.26 no.2
    • /
    • pp.149-179
    • /
    • 2011
  • Statistics of aviation accident in Korea show that safety level of training flights is high. However, more than 80% of aviation accidents happen owing to human factors. And because most reasons of them are concerned with pilot error, it is very important for student pilots who will transport a lot of passengers to develop the knowledge of safety and abilities of risk management for preventing accidents. In this study, in order to investigate the Human Factors which affect safety in training student pilots for flight, verified the correlationbetween experiences of accident, the differences according to the experience level of training flight and the differences between college student pilots and ordinary student pilots on the basis of human factors that composes the SHELL models. For the study, Using SPSS 17.0, conducted Correlation Analysis, Analysis of Variance(ANOVA) and t-test. To sum up the result of this study, student pilot's ability and equipment in the cockpit are the important factors for safety when pilots are training flight. Also the analysis of the differences between human factors according to the characters of student pilots' groups shows that college student pilots are affected by immanent factors and organizational cultures. So far, there haven't been any accidents which is related with human casualties when training at the ATO(Approved Training Organization). But accidents can occur at any time and anywhere. Especially the human factors which comprises most of aviation accident have a wide reach and are impossible to be eliminated, therefore, it is best to minimize them. Because ATO is the starting point to lead the aviation industry of Korea, we will have to be aware of problems and improve education/training of human factors.

  • PDF

An identity analysis of Mechanic Design through the Japan Animation (일본 애니메이션<신세기 에반게리온>으로 본 메카닉 디자인의 정체성 분석)

  • Lee, Jong-Han;Liu, Si-Jie
    • Cartoon and Animation Studies
    • /
    • s.50
    • /
    • pp.275-297
    • /
    • 2018
  • Japan's mechanic animation is widely known throughout the world. 1952년, Japan's first mechanic animation and the first TV animation, , has been popular since it's creation in 1952. Atom, a big hit at the time, has influenced many people. Japanese mechanic animations convey their unique traits and world view to the public In this paper, we are going to discuss the change of the Japanese mechanical design through comparison of the mechanical design, which has been booming since the 1990s in Japan; and the . I expect the results of this analysis to depict Japanese culture and thought reflected in animation, which is a good indication of worldwide cultural view of animation. unexpectedly influenced the Japanese animation industry after it screened in 1995, and there are still people constantly reinterpreting and analyzing it. This is the reaction of the audience to anticipate the mystery and endless conclusions of the work itself. The design elements of Evangelion are distinguished from other mechanical objects. Mechanic design based on human biotechnology can overcome limitations of machine and make you feel more human. The pilot 's boarding structure, which can contain human nature, is reinforced in the form of an enterprising plug, and the attitude of excavation makes humanity more prominent than a straight robot. Thus, pursues a mechanic design that can reflect human identity. can be selected as the mechanic animation of the 80's, and the "Neon Genesis Evangelion" of the 90's shows it with a completely different design. By comparing the mechanical design of two works, therefore, we examine the correlation between the message and the design of the work. presents the close relationship between the identity of the mechanical design and the contents. I would like to point out that mechanical design can be a good example and theoretical basis for the future.

A Study on a Type of Regeneration Project on Old Industrial Complex (노후산업단지 재생사업 추진 유형에 관한 연구)

  • Kim, Joo-hoon;Byun, Byung-seol
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.21 no.2
    • /
    • pp.192-211
    • /
    • 2018
  • With significant influences of old industrial complex in September 2009, Ministry of Land, Infrastructure and Transport chose the 4 districts for the first pilot project. In December 2014, the second pilot project districts were established. In addition, there were 10 districts in April 2016 and 5 districts in April 2016 as the third pilot project and 5 districts in March 2017 as the fourth pilot project. In order to promote smooth business operation of the recycling business, we introduced the effective area designation and special system as stipulated in Article 39.12-13 of the Industrial Location and Development Act revised in May 2015. The effective area, It is a method that can promote propagation and diffusion of the rehabilitation business through visualization by making effective the promotion of the rehabilitation business and by promoting the business in consideration of the geographical feature of the region and industry group, The setting of the unreasonable effective area is based on the criteria and classification of the plan and the objective promotion method according to the individual characteristics of the aged industrial park because the delay of the rehabilitation business and the possibility of the increase of many problems are presented Be sure to Data Envelopment Analysis (DEA) and the old industrial complex database were constructed and utilized to classify the types of recycling projects. Therefore, in this study, it is necessary to strengthen the competitiveness of aged industrial complex by examining the correlation between the diagnosis of 83 aged industrial complex sites and the rehabilitation projects supported by the Ministry of Land, and the types of business promotion for aged industrial parks. It can be used as a guideline for the feasibility of the project.

Influences of Firm Characteristics and the Host Country Environment on the Degree of Foreign Market Involvement (기업특성과 호스트국가 환경이 해외시장 관여도에 미치는 영향에 관한 연구)

  • Maktoba, Omar;Nwankwo, Sonny
    • Journal of Global Scholars of Marketing Science
    • /
    • v.19 no.2
    • /
    • pp.5-16
    • /
    • 2009
  • Against the backdrop of the increasing trend towards economic globalisation, many international firms are indicating that decisions on how to enter foreign markets remains one of the key strategic challenges confronting them. Despite the rich body of literature on the topic, the fact that these challenges have continued to dominate global marketing strategy discourses point to someevident lacunae. Accordingly, this paper considers the variables, categorised in terms of firm contexts (standardisation, market research, competition, structure, competitive advantage) and host country-contexts (economic development, cultural differences, regulation and political risk), which influence the degree of involvement of UK companies in overseas markets. Following hypotheses were drawn from literature review: H1: The greater the level of competition, the higher the degree of involvement in the overseas market. H2: The more centralised the firm's organisation structure, the higher the degree of involvement in the overseas market. H3a: The adoption of a low cost-approach to competitive advantage will lead to a higher degree of involvement. H3b: The adoption of an innovation-approach to competitive advantage will lead to a higher degree of involvement. H3c: The adoption of a market research approach to competitive advantages will lead to a higher degree of involvement. H3d: The adoption of a breadth of strategic target-approach to competitive advantage will lead to a lower degree of involvement. H4: The higher the degree of standardisation of the international marketing mix the higher the degree of involvement. H5: The greater the degree of economic development in the host market, the higher the degree of involvement. H6: The greater the cultural differences between home and host countries, the lower the degree of involvement. H7: The greater the difference in regulations between the home country and the host country, the lower the degree of involvement. H8: The higher the political risk in the host country, the lower the degree of involvement. A questionnaire instrument was constructed using, wherever possible, validated measures of the concepts to serve the aims of this study. Following two sets of mailings, 112 usable completed questionnaires were returned. Correlation analysis and multiple regression analysis were used to analyze data. Statistically, the paper suggests that factors relating to the level of competition, competitive advantages and economic development are strong in influencing foreign market involvements. On the other hand, unexpectedly, cultural factors (especially individualism/collectivism and low and high power distance dimensions) proved to have weak moderating effects. The reason for this, in part, is due to the pervading forces of globalisation and the attendant effect on global marketing. This paper has contributed to the general literature in a way that point to two mainimplications. First, with respect to research on national systems, the study may hold out some important lessons especially for developing nations. Most of these nations are known to be actively seeking to understand what it takes to attract foreign direct investment, expand domestic market and move their economies from the margin to the mainstream global economy. Second, it should be realised that competitive conditions remain in constant flux (even in mature industries and mature economies). This implies that a range of home country factors may be as important as host country factors in explaining firms' strategic moves and the degree of foreign market involvement. Further research can consider the impact of the home country environment on foreign market involvement decisions. Such an investigation will potentially provide further perspectives not only on the influence of national origin but also how home country effects are confounded with industry effects.

  • PDF

A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties (포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구)

  • Kim, Ok Joon;Lee, Ha Young;Kim, Suh Woon;Kim, Soo Jin
    • Economic and Environmental Geology
    • /
    • v.4 no.4
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

A study on the gratification of the patient in the Dental Hospital (치과병원 내원환자의 만족도 조사분석)

  • Kim, Min-Young;Lee, Keun-Woo;Moon, Hong-Suk;Chung, Moon-Kyu
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.46 no.1
    • /
    • pp.65-82
    • /
    • 2008
  • Statement of problem : Today's market economy has been changed more and more to consumer concerned. It is owing to not only consumers ' rising standard of living and education, but also purchasers' easy accessibilities to products through various mass media. The consumer centered market system, where customer can choose items with diverse alternatives to satisfy their self esteem, is also applied to the field of medical business, and accelerated by an increasing income level of shoppers and introducing the whole nations' medical insurance system. Today, the medical industry has become competitive due to increasing number of medical institutions and medical personnel, and this offers wide choices to consumers in the medical market place. At this point of time, it is essential to survey on the primary factor of gratification for the patient in the Dental clinic, as well as on the problems and suggestions in medical service. Purpose : The analysis in this study shows essential factors and expected influential elements in satisfaction of the patient in the Dental Hopsital, and strategic suggestions for the provider of dental service, which can be of benefit to the prospective customer as well as can make improvement in the quality of dental treatment service. Material and method : This study had been researched by collecting and analyzing the organized questionnaires, which were filled in directly from 784 patients, who visit Dental Hospital, Yonsei University in Seoul, from January 23rd to April 15th. Result : It can be summarized like the followings. 1. The social and demographical peculiarities of respondents are as follows. Samples of gender and marital status are adequately extracted, but data on occupation and treatment are are under a bias toward students, undergraduates and graduate students, and orthodontics. 2. 74% of patients who answer the questionnaire were highly satisfied with the service of dental clinic in the section of overall satisfaction. 3. The survey result about specific service of dental treatment, within sections of independent variables, is like the followings; Patients are highly gratified with service system, kindness, explanation, explanation on expected waiting hours, reservation system, emergency measures, expert treatment, existence of knowledge of dentistry, size of hospital, disinfection, equipment and parking, but lowly satisfied with expense of treatment, preparatory hours for treatment, waiting hours, treatment hours and the period of subscription. 4. The correlation analysis showed that there is no significant linear relationship between the independent variables. 5. The probit regression analysis showed that 8 out of 34 independent variables explained the dependent variables at the level of 0.01. 6. It shows that 8 independent variables, which can affect customers 'satisfaction, are clearing up of inconvenience, service system, kindness, explanation, treatment hours per attendance, reservation system, existence of knowledge of dentistry, and contentment of equipment in the hospital. Conclusion : The consumer's satisfaction totally relies on subjective evaluations of customers. Providing appropriate service, which can meet the criteria for the customer who demands various wares, pursues luxury goods, and expects high quality of medical service, is essential to fulfill patients' satisfaction. Many medical institutions do their best to satisfy their customer, touch their consumer, and offer patience centered services, and it is also applied to the field of dentistry. Establishing brand new strategic managements and elevating the quality of dental service based on this survey are required to improve the satisfaction of patience in the Dental Hospital.

A Study on University Students' Business Planning and Starting up a Business in Korea (우리나라 대학생들의 창업 및 사업계획에 대한 연구)

  • Koh, In-Kon
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.7 no.2
    • /
    • pp.1-8
    • /
    • 2012
  • Recently the youth starting up a business has become a buzzword. Business plan is a fundamentals in starting up a business. Therefore, in this study, I investigated the business planning behavior of university students in Korea. Especially, I investigated whether university students in Korea dealt with business plan inside and outside or not, and examined university students' thought whether corporate performance is related to business plan or not, and if any, how closely they are. Meanwhile, existing studies and books are arguing that there is a high correlation between business plan and corporate performance, however, there are not many domestic and/or foreign studies that analyzed it empirically. In order to find an answer to this problem, this study was approached empirically. First, the components of business plan were selected through an extensive literature review including existing researches and through factor analysis, I classified them into the five factors of product management, product development, management support system building, organizational management and macro planning. Also, I classified corporate performance into quantitative and qualitative performance, and investigated the influences of business plan factors on those performances. As a result, I found belows. First, university students in Korea thought that the business plan components affected the quantitative and qualitative performances of corporate positively. Second, Korean students had high interests in starting up a business and wanted to run a service business but had almost no experience of business planning. Whilst, Foreign students had relatively high interests in starting up a business and experiences of business planning. They wanted starting up in various industry also. Meanwhile, I did't find the gender differences in those aspects. In this study, I empirically investigated the relation between business plan components and corporate performances in the university students' view, not that of company. So I believe that this study can shed lights on the direction of effective starting up education for increasing the success rate of youth starting up a business.

  • PDF

Absorbance as Simple Indicator for Polyphenol Content and Antioxidant Activity of Honey (벌꿀 폴리페놀 함량 및 항산화 활성의 간단지표로서의 400 nm 흡광도)

  • Pyo, Su-Jin;Kim, Jong-Sik;Lee, Dong Hee;Sohn, Ho-Yong
    • Journal of Life Science
    • /
    • v.30 no.6
    • /
    • pp.555-562
    • /
    • 2020
  • This study analyzed the total polyphenol (TP), total flavonoid (TF), and protein content, the Absorbance at 400 nm (A400), and the antioxidant and hemolytic activities of 150 Korean honey products, including 41 chestnut (CH), 42 acacia (AH), 62 multi-floral (MH), and five Styrax japonica (TH) varieties. Our results showed that the components and antioxidant activities of honey are dependent on botanical origin rather than farming area or farmer. CH showed the highest levels of TP (88.6±29.8 mg/100 g) and TF (1.20±0.82 mg/100 g), whereas TH had the highest protein (21.5±5.1 mg/100 g). A400 was the highest in CH (0.161±0.044). All of the honey products exhibited negligible hemolytic activity against human red blood cells up to 1 mg/ml. Potent radical scavenging activities for 1,1-diphenyl-2-picryl hydrazyl (DPPH), 2,2-azobis(3-ethylbenzothiazoline-6- sulfonate) (ABTS), nitrite and reducing power were also observed in CH. Correlation coefficients (CCs) between analysis parameters were calculated and the highest was identified between TP and ABTS scavenging activity (0.726). The CCs between A400 and TP and A400 and ABTS scavenging activity were 0.644 and 0.661, respectively, suggesting that A400 could be used as a quality indicator for the polyphenol content and antioxidant activity of particular honeys. Future research on polyphenol by flower origin and the identification of compounds for A400 is necessary.

Correlation of Consumer Evaluation on Restaurants in Social Network System (SNS) with Food Hygiene (식품접객업소에 대한 사회관계망서비스(SNS) 상의 소비자 평가와 위생상태의 연관성 분석)

  • Kim, Kyungmi;Kim, Sejeong;Lee, Soomin;Lee, Jeeyeon;Lee, Heeyoung;Choi, Yukyung;Yoon, Yohan
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.27 no.4
    • /
    • pp.473-476
    • /
    • 2017
  • Social network service (SNS) plays an important role in food service industry consumers SNS restaurants, and other consumers review the reputations. It was assumed that bad reputation could have poor food hygiene. Therefore, this study evaluated the relation between reputations SNS and food hygiene. Restaurants were searched using web portals and 12 restaurants (six for good and six for bad reputation) were selected. Microbiological analysis (total aerobic bacteria, coliform, and Escherichia coli) for main and side dish was performed. Detection frequencies for total aerobic bacteria were not different between good and bad restaurants. However, bad restaurants had higher detection frequencies (70.8%) with mean of 3.2 log CFU/g for coliform than good restaurants (62.5%; mean of 2.3 log CFU/g). In addition, bad restaurants had higher detection frequencies (25%) of E. coli with mean of 0.8 log CFU/g than good restaurants (8.3%; mean of 0.5 log CFU/g). This result indicates that consumer reputations SNS are related to food hygiene, and the reputation data can be used for food hygiene inspection by food safety agencies.

Study on the Strategy for Managing Aggregate Supply and Demand in Gyeongsangbuk-do, South Korea (경상북도 골재수요-공급 관리 전략 연구)

  • Jin-Young Lee;Sei Sun Hong;Chul Seoung Baek
    • Economic and Environmental Geology
    • /
    • v.57 no.2
    • /
    • pp.161-175
    • /
    • 2024
  • Aggregate typically refers to sand and gravel formed by the transportation of rocks in rivers or artificially crushed, constituting a core resource in the construction industry. Gyeongsangbuk-do, the largest administrative area in South Korea, produces various sources of gravel, including forest, land (excluding other sources), river, and crushed stone. As of 2022, it has extracted approximately 6.96 million cubic meters of aggregate, with permitted production totaling around 4.07 million cubic meters and reported production of about 2.88 million cubic meters. The aggregate demand in Gyeongsangbuk-do is estimated to be 12.39 million cubic meters according to the estimation method in Ready-Mix Concrete. From the supply perspective, about 120 extraction sites are operational, with most municipalities maintaining an appropriate balance between aggregate demand and supply. However, in some areas, there is inbound and outbound transportation of aggregate to neighboring regions. Regions with significant inbound and outbound aggregate transportation in Gyeongsangbuk-do are areas connected to Daegu Metropolitan City and Pohang City along the Gyeongbu rail line, showing a high correlation with population distribution. Gyeongsangbuk-do faces challenges such as population decline, aging rural areas, and insufficient balanced regional development. Analysis using GIS reveals these trends in gravel demand and supply. Currently in this study, Gyeongsangbuk-do meets its demand for aggregate through the supply of various aggregate sources, maintaining stable aggregate procurement. River and terrestrial aggregates may be sustained as short-term supply strategies due to the difficulty of longterm development. Considering the reliance on raw material supply for selective crushing, it suggests the need for raw material management to maintain stability. Gyeongsangbuk-do highlights quarries in the forest as an important resource for sustainable aggregate supply, advocating for the development of large-scale aggregate quarries as a long-term alternative. These research findings are expected to provide valuable insights for formulating strategies for sustainable management and stable utilization of aggregate resources.