• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.1011-1017
• /
• 2002

Conjugated linoleic acids (CLA) have been shown to decrease body fat content of individually-housed pigs but little is known about the responses under commercial conditions. Two studies were conducted to evaluate the effect of CLA under commercial conditions using contemporary genotypes. The experimental designs were similar between the two sites. Briefly, the studies were 2${\times}$2 factorial designs with the respective factors being sex (boar and gilt) and supplemental dietary CLA (0 and 4 g/kg). The studies involved 16-20 pens of pigs with 4-5 pens of each sex${\times}$CLA group. The first study was conducted with 144 pigs in 16 pens consuming a pelleted feed for 6 weeks at Bunge Meat Industries, Corowa, NSW. In the second study, 160 pigs were obtained from a commercial source and put into 20 pens in simulated commercial conditions and fed a mash diet for 7 weeks at Medina Research Station, WA. In Study 2 some aspects of meat quality were also investigated. Data from Study 1 showed that, although CLA had no significant effect upon feed intake and daily gain, the small changes in both resulted in a reduction in (-0.10 g/g, p=0.10) feed conversion ratio (FCR). While there was no significant effect of CLA on ultrasonic backfat depths, there was a significant decrease in carcass P2 (-1.0 mm, p=0.014) and estimated carcass fat (-7 g/kg, p=0.049). In the study conducted at Medina CLA had no significant effect upon feed intake, feed:gain or most measures of back fat. The exception was that dietary CLA decreased the rate of accumulation of fat at the shoulder, particularly in gilts, resulting in a significantly lower amount of shoulder fat at slaughter (-1.3 mm, p=0.044). CLA tended to increase dressing percentage although this was not significant (+0.5%, p=0.14). Meat from CLA treated pigs tended to be darker (p=0.12) and had a higher ultimate pH (p=0.06). These data suggest that under commercial conditions dietary CLA can improve growth performance and decrease P2 in pigs of an improved genotype, particularly gilts.

• 산업보건소식
• /
• no.47
• /
• pp.4-14
• /
• 1987

The authors investigated estimated amounts of salt intake of workers in manufacturing industries who consisted of 1,506 males in 6 manufacturing fields and 476 females in 3 fields in Pusan area using filter paper method which was developed recently. The obtained results were as follows; 1. Mean excretion amounts of urinary electrolytes were Na 200.7 mEq/l, K 44.2 mEq/l and Cr 1.12g/l in male and Na 190.2 mEq/l, K 44.0 mEq/l and Cr 1.10g/1 in female. 2. Mean daily salt intake amounts were 19.4g in male and l5.3g in female. 3. By the fields of manufacturing industries in male, workers in metal product field had the highest salt intake as 20.0g, and the following were workers in food and tobacco field as 19.7g, workers in textile, wearing apparel and leather field as 19.6g in order. 4. In female, workers in textile, wearing apparel and leather field had the highest salt intake as l5.7g and the next were workers in chemical, coal and rubber products field as l5.0g and workers in fabricated metal products, machinery and equipments as l4.3g, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1745-1753
• /
• 2008

We analyzed the physical and chemical properties such as proximate analysis, ultimate analysis, heating values, thermogravimetric analysis, and combustion test for the organic sludge discharged from chemical and petrochemical product manufacturing industries in the industrial complex. The average combustible and ash content of organic sludges from chemical and petrochemical product manufacturing industries were 17.42%, 7.45%, and 18.25%, 4.22%, respectively. The C, H, O, N, and S compositions for chemical and petrochemical product manufacturing industries were 33.06, 4.34, 24.81, 5.18, and 0.72%. And those compositions for petrochemical product manufacturing industries were 36.58, 4.74, 26.79, 5.09, and 0.49%, respectively. From the TGA test, the minimum temperature for combustion of the sludge discharged from B company was $700^{\circ}C$ for direct use for energy and 2 sludges(F and N companies) were about $600^{\circ}C$. According to the basic combustion test, high concentration of CO was formed because oxidation and pyrolysis reaction take place in the batch type reactor at the same time. From this phenomena we could obtain the significant data for the overheating and breakage of furnace.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.569-581
• /
• 2020

Since the dehydration packages of offshore plant deal directly with oil & gas, there is a great risk of fire and explosion during operation. Therefore, this study performed risk assessment through HAZard & OPerability (HAZOP) for solid desiccant dehydration package that can remove water component of natural gas in offshore floating liquefied natural gas (LNG) production facilities below 0.1 ppmv. The risk matrix was determined by dividing the likelihood and the severity into five levels separately by asset, life, environment and reputation. The piping & instrumentation diagram (P&ID) of the dehydration package was divided into 9 nodes. Total 22 deviations were assessed in consideration of the adsorption and desorption conversion cycle. A risk assessment based on deviations revealed 14 major hazards. Three representative types of hazards were open/close failure of the control valve, control failure of the heater, and abnormal operation of the regeneration gas cooler. Finally, we proposed the installation of additional safety devices to improve safety against these major hazards, such as safety instrumented functions, alarms, etc.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.56-59
• /
• 2005

Aluminum alloy casting is gaining increased acceptance in automotive and electronic industries and especially, squeeze casting is the most efficient method of mass manufacturing of such parts. In this study, the microstructures and mechanical properties of Al-7.0Si-0.4Mg(AC4C) alloy fabricated by squeeze casting process for development of fuel system parts (fuel rail) are investigated. The microstructure of squeeze cast specimen was composed of eutectic structure aluminum solid solution and $Mg_2Si$ precipitates. The tensile strength of as-solid solution treatment Al-7.0Si-0.4Mg alloy was 298.5MPa. It was found that Al-7.0Si-0.4Mg alloy had good corrosion resistance in electrochemical polarization test.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.89-98
• /
• 2015

Purpose - In today's globalized and modern business environment, corporate social responsibility (CSR) activities are considered to be essential for the sustainable development of enterprises. In addition, the corporate philanthropy that is related to CSR practices, as well as their being capable of reducing the anti-corporate sentiment of people have facilitated a qualitative forward leap into the quantitative growth phase. This study aims to undertake a comparative evaluation of corporate philanthropy through the Importance-Performance Analysis (IPA) method focusing on service and manufacturing industries, and to eventually determine a differentiated approach that is needed for corporate philanthropy. Research design, data, and methodology - The survey responses were collected through online research on specialized companies from consumers nationwide who were aged from 20 to 60 and who are aware of corporate philanthropy. A total of 408 sheets of questionnaire survey were used. Frequency analysis was undertaken in this study. The interviewees had demographic characteristics of gender: 206 males (50.5%) and 202 females (49.5%). They also had demographic characteristics of age: 82 people were over 20 (20.1%), 96 over 30 (23.5%), 105 over 40 (25.7%), and 125 over 50 (30.7%) years of age. The distribution of interviewees' residences is as follows: 154 persons (37.7%) in the Special City, 102 persons (25.0%) in the Metropolitan City, and 152 persons (37.3%) in the Provincial Region. The interviewees have been working for the following companies: 34 persons (8.3%) in LG Display, 80 (19.6%) in KT&G, 49 (12.0%) in Amore Pacific, 42 (10.3%) in KIA Motors, 47 (11.5%) in SBS, 52 (12.8%) in Shinhan Bank, 86 (21.1%) in Asiana Airlines, and 18 (4.4%) in Hyundai Department Store. We applied the paired t-test for the IPA analysis. PASW Statistics 18 was used for statistical analysis. Results - The results of IPA analysis indicated that the importance and performance degrees in both manufacturing and service industries were significantly different. Major empirical results showed that, in consumer, social, economic, philanthropic, and environmental dimensions, in the sub-factors of philanthropy activities in both manufacturing and service industries, the importance degree was found to be higher than performance degree. Further, the average difference between importance degree and performance degree by the sub-factors of philanthropy activities. On the other hand, the average difference of environmental dimension was found to be highest in both service and manufacturing industries. Thus, while consumers consider the philanthropy activities of the environmental dimension as most important, actual companies treat performance of philanthropy activities of the environmental dimension insufficiently or negligibly to some degree. Conclusions - The differentiated approach method that is required for corporate philanthropy may be proposed to uplift corporate accomplishments by analyzing the IPA of the attributes of the sub-factors of corporate philanthropy. This is, to an extent, insufficient in the existing studies related to the use of the IPA technique, and it shows the items that are to be conducted intensively.

• International Area Studies Review
• /
• v.17 no.4
• /
• pp.89-106
• /
• 2013

In this paper, we analysed the absolute and conditional convergency hypothesis and the determinants of productivity in manufacturing industries from 2000 to 2009 with 16 provinces and metro-cities by using panel analysis. In terms of convergency hypothesis test, the results show that both of the convergency hypothesis, the absolute vs. conditional hypothesis, reject the null hypothesis(H0) implying the labor productivity of the 16 province and metro-cities converged to the steady state equilibrium. Also, the speed of the absolute and conditional convergency for the 16 province and metro-cities are average 4.4% and 0.73% respectively. In addition, the results of the determinants of the labor productivity in manufacturing industry show that human capital and manufacturing location coefficient affect to the value- added per capita significantly, but government expenditure per capita doesn't affect to the value- added per capita. As for the total factor productivity, government expenditure per capita and fixed capital per capita are important factors, but research and development doesn't. Hence the government has to revise the balanced regional development policy to develop regional manufacturing industries for the vulnerable regions. Also, it requires more study regarding income disparities and productivity.

• Environmental and Resource Economics Review
• /
• v.21 no.1
• /
• pp.129-156
• /
• 2012

This study analyzes the contribution to the national economy of the stable water supply through managing multi-purpose dam. For the analysis, we consider 17 major multi-purpose dams and build a CGE model with summer water and winter water being the production factors as the base year of 2007. We analyze the economic impact of meeting water demand due to the dam management and estimate the risk premium of reducing the uncertainty of water supply. The analysis results show a significant production decrease in the industries of agriculture, forestry and fisheries and tap water as well as the food and beverage industry using the former industries' output as intermediates in the production and show an production increase largely in steel industry and electronic and electrical industries. Being compared to the benchmark solution, GNP is analyzed as being reduced by 0.22~0.68%. Meanwhile, the risk premium is estimated to be about 4 billion to 24 billion won for the value 01 the measure of relative risk aversion in the range 01 0.5 to 3.0.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.123-136
• /
• 2012

The validity of the results from observational methods such as RULA, REBA, OWAS has been one of major concerns due to their subjective characteristics in determining the posture of interests. There have been many studies regarding validity of the results from each checklist. However, most studies provided only fragmentary rather than comprehensive results in nature. This study specifically tried to analyze consistency of novice user based on intra-observer consistency and sensitivity of industrial types during MSDs(Musculoskekltal Disorders) evaluation with major checklists. In this study, twenty two novice subjects were participated to conduct MSDs evaluation for the forty five jobs from three types of industries(automobile, electronics, hospital). The main results for this study were summarized as follows; 1) The action level based on RULA was always higher than that from REBA and OWAS for all three types of industries., 2) The order of consistency from novice users was OWAS(72.7%(kappa=0.57)) RULA(54.3%(kappa=0.41)), REBA(41.0%(kappa=0.34))., 3) The percentage of agreement between 2nd and 3rd trials was higher than those between 1st and 2nd trials and between 1st and 3rd trials irrespective of industrial types during using RULA and REBA., 4) The average score of automobile industry was higher than those of hospital and electronics industries., 5) The types of jobs associated with five body parts(A1(Front), A2(Interior), A3(Rear), A4(Lower), A5(Door)) in automobile industry showed statistically significant differences in terms of MSDs scores for the body parts considered in each checklists.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.