• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.519-528
• /
• 2003

Species composition and community structure of marine benthic community were studied in the intertidal zone of Jijindo Island, Gwangyang Bay. A total of 85 species of benthic marine plants including the 5 Cyanophyta, 9 Chlorophyta, 13 Phaeophyta, 56 Rhodophyta and 2 Magnoliophyta that were listed. The community structure was represented by Gelidium divaricatum in the upper zone, Celidium divalicatum and Ulva pertusa in the middle, and Ulva pertusa, Chondria crassicaulis, Chondracanthus intermedia and Sargassum thunbergii in the lower intertidal zone. The dominant species in the rnscro-zoobenthic community were Chthamalux challengeri in the upper and middle, Littorina brevicula between the upper and middle, and Mytilus edulis and Crassostrea gigas in the middle and lower intertidal zones. The economic benthic organisms such as Undaria pinnatifida, Mytilus edulis, and Crassostrea gigas found in the lower intertidal zone were frequently disturbed due to their collection by local resident. Therefore, it is necessary to record the correct information pertaining to these cases. The species diversity indices estimated kom different sources were quite different. They were 2.22 derived from frequency, 1.67 based on coverage, 2.17 based on sum of frequency and coverage and 2.04 derived from importance value. Species diversity and number of algal species in Gwangyang Bay have noticeably decreased, compared with their previously reported status. It is estimated that their decreases were caused by changes in the marine environment, especially pertaining to the polychaete community resulting from reclamation and dredging activity undertaken for the industrial development.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.4
• /
• pp.87-100
• /
• 2020

Economic Development Zone(EDZ) in the province is one of the foreign policy for economic development of North Korea. North Korea has promulgated 27 Economic Development Zones(5 EDZs as central level and 22 EDZs as provincial level) to promote economic growth through the expansion of external opening policy. EDZs of the provinces play an important role in North Korea's national and regional economic growth. The purpose of this study is to select analytical criteria that can be quantified when considering the location conditions of North Korean economic development zones when domestic companies advance into North Korea according to the progress of inter-Korean economic cooperation, and derive the relative importance between the criteria. After that, based on this, we intend to quantify the evaluation of the location priority of the economic development zone. In this study, through AHP analysis results, when domestic companies enter North Korea, we derive the importance and preference of location selection factors when considering the location conditions of North Korean economic development zones. Taking into account the reality of North Korea when the Korean company entered the North economic development zone following location for evaluation. That is, logistics and transportation, industrial infrastructure, competitiveness, and management incentives. And 14 sub-factors were selected and AHP analysis was performed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.381-382
• /
• 2023

Frequent accidents occur when workers at construction sites leave the safety zone, and particularly in the past 5 years, 9 fatal accidents occurred at the Korea Railroad Corporation due to train accidents on other tracks during track work. With the Severe Accident Punishment Act taking effect in January 2022, it is a priority to secure a safe work environment for workers at industrial (construction) sites. Therefore, there is a need to manage workers' departure from the safety zone (construction zone) and to facilitate communication within the construction zone. In this study, a mobile edge computing CCTV system is proposed that uses geofencing to determine whether workers are working in the danger zone, which can judge and respond in real-time to the ever-changing field environment. The proposed system is mobile and flexible, rather than server-based fixed CCTV. However, since it is designed mainly based on images, it has limitations in recognition rate depending on the environment such as distance, viewing angle, and illumination. As a way to compensate for this, it is required to develop more reliable equipment by combining technologies such as LiDAR and Radar.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.2
• /
• pp.39-50
• /
• 1994

Most research results on the throughput of unit-load automated storage retrieval (AS/R) systems assume the randomized storage; that is, all slots In the entire rack are equally likely to be selected for the storage location. However, for the most existing AS/R systems which use Closest Open location storage policy, Park[6] mathematically showed that this assumption results in a significant difference from the actual performance of AS/R systems. In this study, we present more details about the performance of the unit-load AS/R systems by considering the rack utilization and rack density; and examine their impact on the throughput of AS/R systems by using computer simulation. A new storage policy named Shortest Cycle Location(SCL) is proposed. Simulation results indicate that the performance of SCL policy consistently outperforms the Closest Open location storage policy. We also define the "Extra-Cost Zone" compared to the "No-Cost Zone"[3] and explore its geometric and practical meaning.

• Journal of the Korean Society of Combustion
• /
• v.14 no.1
• /
• pp.19-24
• /
• 2009

A novel low NOx oil burner of 0.7 MW (for a 1 ton steam/hr industrial boiler) was designed and tested to investigate the combustion characteristics through in-flame measurement and flue gas analysis. Flame shape was observed by CCD camera and $CH^*/{C_2}^*$ radical distribution in the flame were observed, along with measurement of flue gas composition such as NOx and CO, for various heat inputs, excess airs and pressure of the fuel spary nozzles. The flame showed the two-zone structure: fuel-rich and fuel-lean zone, which was very favorable for the low-NOx combustion, and the NOx emission for haevy oil combustion was significantly reduced to < 150 ppm at 4 % $O_2$, compared with the NOx level of a conventional heavy oil burner.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.109-111
• /
• 2006

In this study, microstructure and mechanical properties for the friction stir welded 2519Al-T87 alloy of the thickness of 38.8mm were studied using DSC, OM, SEM and micro hardness tester. DSC analysis show that GP Zone, ${\theta}'$ and $\theta$ phases in upper part and ${\theta}'$ and $\theta$ phase in lower part of the FSW zone. Recrystallized large grains are observed in HAZ, and elongated small and large grain in the TMAZ. In SZ, very small grains forms by high plastic deformation and heat from friction by tool and specimen.

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.3-17
• /
• 2004

Overbreak, underbreak and range of disturbed rock zone (DRZ) are the most important factors in evaluating the results of tunnel blasting. These factors, which depend on the discontinuities in rock mass, the blasting patterns and drilling conditions, have been studied. The range of DRZ can be estimated by relationships between vibration velocity and associated tensile stress. A new computerized rocket jumbo drill has been adopted to reduce overbreak based on the analysis of drilling accuracy. In-situ blasting tests were also performed by varying initiating systems. Overbreak can be reduce from 34.5cm to 20cm. The range of DRZ is 0.2m with stoping holes and 0.4m with wall holes respectively. In addition, some methods to reduce DRZ have been presented in this study.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.157-168
• /
• 1996

The deposition characteristics of ultrafine $SiO_2$ particles were investigated in a tube furnace reactor theoretically and experimentally controlling tube wall temperature in deposition zone. The model equations such as mass and energy balance equations and aerosol dynamic equations inside reactor and deposition tube were solved to predict the particle growth and deposition. The particle size and deposition efficiencies of $SiO_2$ particles were calculated, changing the process conditions such as tube furnace setting temperature, total gas flow rate inlet $SiCl_4$ concentration and were compared with the experimental results.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.197-208
• /
• 1999

The process of localization of cracks and movement of the fracture process zone(FPZ) was studied using the acoustic-emission(AE) techniques. The rate of AE events and sources of AE activity were studied for mortar and rock specimens loaded in uniaxial compression. A series of transducers could be used to detect and AE activity. Based on the time differences between detection of the event at different transducers, source of AE activity could be detected. The rate of AE events increased sharply before peak load. The highest rate occurred just after peak load was attained. The effective crack length estimated from the modified linear-elastic fracture mechanics seemed consistent with the optical and AE measurements.

• Journal of Industrial Technology
• /
• v.14
• /
• pp.49-61
• /
• 1994

This study deals with the automated storage/retrieval systems (AS/RS) where the rack is discrete and the random storage assignment rule is adopted. New storage policies named FNSC (first no-cost zone, second closest-open location) and FNSH (first no-cost zone, second a half side closest-open location) are proposed. Simulation results indicate that performance of FNSH is slightly lower than that of the SCL but it does not need much time to perform. The "stay" strategy of S/R machine is examined as a means of increasing the frequency of dual command.