• Safety and Health at Work
• /
• 제2권1호
• /
• pp.65-69
• /
• 2011

Objectives: Carbon nanotubes are an important new class of technological materials that have numerous novel and useful properties. Multi-walled carbon nanotubes (MWCNTs), which is a nanomaterial, is now in mass production because of its excellent mechanical and electrical properties. Although MWCNTs appear to have great industrial and medical potential, there is little information regarding their toxicological effects on researchers and workers who could be exposed to them by inhalation during the handling of MWCNTs. Methods: The generation of an untangled MWCNT aerosol with a consistent concentration without using surfactants that was designed to be tested in in vivo inhalation toxicity testing was attempted. To do this, MWCNTs were dispersed in deionized water without the addition of any surfactant. To facilitate the dispersion of MWCNTs in deionized water, the water was heated to $40^{\circ}C$, $60^{\circ}C$, and $80^{\circ}C$ depending on the sample with ultrasonic sonication. Then the dispersed MWCNTs were atomized to generate the MWCNT aerosol. After aerosolization of the MWCNTs, the shapes of the NTs were examined by transmission electron microscopy. Results: The aerosolized MWCNTs exhibited an untangled shape and the MWCNT generation rate was about 50 $mg/m^3$. Conclusion: Our method provided sufficient concentration and dispersion of MWNCTs to be used for inhalation toxicity testing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.98-103
• /
• 2008

1T1C DRAM has been facing technological and physical constraints that make more difficult their further scaling. Thus there are much industrial interests for alternative technologies that exploit new devices and concepts to go beyond the 1T1C DRAM technology, to allow better scaling, and to enlarge the memory performance. The technologies of DRAM cell are changing from 1T1C cell type to capacitor-less 1T-gain cell type for more scalable cell size. But floating body cell (FBC) of 1T-gain DRAM has weak retention properties than 1T1C DRAM. FET-type 1T-FeRAM is not adequate for long term nonvolatile applications, but could be a good alternative for the short term retention applications of DRAM. The proposed nonvolatile refresh scheme is based on utilizing the short nonvolatile retention properties of 1T-FeRAM in both after power-off and power-on operation condition.

• Journal of Information Technology Services
• /
• 제19권2호
• /
• pp.93-107
• /
• 2020

Recently, artificial intelligence (AI) technologies has been widely used in various fields such as finance, and distribution. Accordingly, Korea has also announced its AI R&D strategy for the realization of i-Korea 4.0 in May 2018. However, Korea's AI technology is inferior to major competitors such as the US, Canada, and Japan Therefore, in order to cope with the 4th industrial revolution, it is necessary to allocate AI R&D budgets efficiently through selection and concentration so as to gain competitive advantage under a limited budget. In this study, the importance of each AI technology was evaluated in multi-dimensional way through the questionnaire of expert group using the evaluation index derived from the literature review From the results of this study, we draw the following implication. In order to successfully establish the AI technology development strategies, it is necessary to prioritize the cognitive computing technology that has great market growth potential, ripple effect of technology development, and the urgency of technology development according to the principle of selection and concentration. To this end, it is necessary to find creative ideas, manage assessments, converge multidisciplinary systems and strengthen core competencies. In addition, since AI technology has a large impact on socioeconomic development, it is necessary to comprehensively grasp and manage scientific and technological regulations in order to systematically promote AI technology development.

• Korean Management Science Review
• /
• 제30권2호
• /
• pp.11-30
• /
• 2013

Small and medium-sized enterprises (SMEs) constitute an important part of current industrial economies. Information technologies can be useful strategic weapons for SMEs by enhancing their competitiveness. Categorized as one kind of cloud computing, SaaS is a computing resource and software sharing model which can be accessed via the Internet. Based on virtualization technology, SaaS is expected to improve the efficiency and quality of the IT service level in SMEs. This study attempts to identify the determinants of SaaS adoption intention among Korean SMEs. Through the lens of the theory of planned behavior, this study adopts technological, organizational, environmental factors to explore the determinants of cloud computing adoption intention. The research population is the SMEs that have been funded by the Korean government. Partial least square method was used for empirical analysis of 190 samples collected through on-line survey. The results show that the positive attitude is influenced by business process improvements. Vender support and top management support are positively associated with subjective norm. Vendor support, top management support can relieve perceived behavior control factors. Government support directly influences adoption intention of cloud computing. These findings can provide useful strategy for both SMEs and vendors of SaaS.

• Journal of Information Technology Services
• /
• 제15권4호
• /
• pp.175-191
• /
• 2016

This paper investigates changing processes of new product development (NPD) systems. In order to continuously develop first-class products, world wide super-class products and hit products, R&D (Research & Development) must be competitive. Firms must achieve competitiveness in terms of quality and cost by launching new products. Most films focus on improving effectiveness and efficiency of NPD process. However, sometimes, they face to the critical challenge of transforming NPD processes entirely reflecting dramatic change of their core products. Transforming of NPD process is difficult in that it involves technological and organizational changes in marketing, R&D, Engineering and manufacturing systems. The purpose of this paper is to shed light on processes and factors affecting successful transformation of new product development systems. We present a case study on the changing processes of S company's NPD process. S company has changed new product development systems successfully from a major IT equipment supplier to an automotive supplier. Empirical results show successful changes of 10 core NPD processes from understanding the market and customers process to after sales process. In case of transformation of NPD, adaption of attribute of business is crucial for success factors in the process innovation. This paper shows the bridging the gap between IT and automotive industrial dynamics and growth through adaption of two processes in the NPD.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권2호
• /
• pp.37-43
• /
• 2010

The wild silkworm, Antheraea mylitta Drury (Lepidoptera: Saturniidae) is a polyphagous silk producing insect that feeds on Terminalia arjuna, T. tomentosa and Shorea robusta and is distributed in the forest belts in different states of India. Phenotypically distinct populations of the A. mylitta are called "eco-race" or "ecotypes". Genetic improvement of this wild silkworm has not progressed much due to lack of adequate information on the factors that control the expression of most of the economically important traits. Considering the amazing technological advances taking place in molecular biology, it is envisaged that it is now possible to take greater control on these intractable traits if a combination of genetic, molecular and bioinformatics tools are used. Linkage disequilibrium (LD) mapping is one such approach that has extensively been used in both animal and plant system to identify quantitative trait loci (QTLs) for a number of economically important traits. LD mapping has a number of advantages over conventional biparental linkage mapping. Therefore, LD mapping is considered more efficient for gene discovery to meet the challenge of connecting sequence diversity with heritable phenotypic differences. However, care must be taken to avoid detection of spurious associations which may occur due to population structure and variety interrelationships. In this review, we discuss how LD mapping is suitable for the dissection of complex traits in wild silkworms (Antheraea mylitta).

• Informatization Policy
• /
• 제28권1호
• /
• pp.3-21
• /
• 2021

Klaus Schwab's discussion on the Fourth Industrial Revolution provides a framework for predicting the direction of legal technology development. Technological convergence, which has emerged as the core concept of the Fourth Industrial Revolution has a significant effect on legal technology. In particular, various new technologies, such as legal chatbots and platforms, are being introduced to enhance efficiency and accessibility in the legal field. However, legal technology is still in its early stage, with institutional improvement needed to vitalize the industry. In this paper, we first specify the concept and classification of legal technology in Chapter 2, followed by trends and limitations in Chapter 3 and ways of vitalizing legal technology in the future in Chapter 4. To invigorate legal technology development, it is necessary to put in place legal regulatory measures that stipulate the active disclosure of legal data, such as precedents, and make free use of such measures. In the law, many issues, such as the safety of artificial intelligence, personal information protection, and ethical standards, will be discussed in the future. Therefore, via this paper, we hope to promote the formation of social consensus and prepare countermeasures, such as legislative measures.

• Journal of Intelligence and Information Systems
• /
• 제17권1호
• /
• pp.37-52
• /
• 2011

Supply chain management is a strategic thinking which enhances the value of supply chain and adapts more promptly for the changing environment. For the seamless partnership and value creation in supply chains, information and knowledge sharing and proper partner selection criteria must be applied. Thus, the partner selection criteria are critical to maintain product quality and reliability. Each part of a product is supplied by an appropriate supply partner. The criteria for selecting partners are technological capability, quality, price, consistency, etc. In reality, the criteria for partner selection may change according to the characteristics of the components. When the part is a core component, quality factor is the top priority compared to the price. For a standardized component, lower price has a higher priority. Sometimes, unexpected case occurs such as emergency order in which the preference may shift on the top. Thus, SCM partner selection criteria must be determined dynamically according to the characteristics of part and its context. The purpose of this research is to develop an OWL model for the supply chain partnership depending on its context and characteristics of the parts. The uncertainty of variable is tackled through fuzzy logic. The parts with preference of numerical value and context are represented using OWL. Part preference is converted into fuzzy membership function using fuzzy logic. For the ontology reasoning, SWRL (Semantic Web Rule Language) is applied. For the implementation of proposed model, starter motor of an automobile is adopted. After the fuzzy ontology is constructed, the process of selecting preference-based supply partner for each part is presented.

• The Journal of the Convergence on Culture Technology
• /
• 제9권5호
• /
• pp.613-618
• /
• 2023

The advancement of Information and Communication Technology (ICT) is accelerating innovation across society, and the defense sector is no exception as it adopts technologies aligned with the Fourth Industrial Revolution. In particular, the Army is making efforts to establish an advanced Army TIGER 4.0 system, aiming to create highly intelligent and interconnected mobile units. To achieve this, the Army is integrating cutting-edge scientific and technological advancements from the Fourth Industrial Revolution to enhance mobility, networking, and intelligence. However, the existing addressing system, IPv4, has limitations in meeting the exponentially increasing demands for network IP addresses. Consequently, the military considers IPv6 address allocation as an essential process to ensure efficient network management and address space provisioning. This study proposes an approach for IPv6 address allocation for the future military, considering the Army TIGER system. The proposal outlines how the application networks of the Army can be differentiated, and IP addresses can be allocated to future unit structures of the Army, Navy, and Air Force, from the Ministry of National Defense and the Joint Chiefs of Staff. Through this approach, the Army's advanced ground combat system, Army TIGER 4.0, is expected to operate more efficiently in network environments, enhancing overall information exchange and mobility for the future military.

• Journal of Institute of Control, Robotics and Systems
• /
• 제12권5호
• /
• pp.480-488
• /
• 2006

Industrial and economical importance of CP(Cellular Phone) is growing rapidly. Combined with IT technology, CP is one of the most attractive technologies of today. However, unless we find a new breakthrough in the technology, its growth may slow down soon. RT(Robot Technology) is considered one of the most promising next generation technologies. Unlike the industrial robot of the past, today's robots require advanced features, such as soft computing, human-friendly interface, interaction technique, speech recognition object recognition, among many others. In this paper, we present a new technological concept named RCP (Robotic Cellular Phone) which integrates RT and CP in the vision of opening a combined advancement of CP, IT, and RT, RCP consists of 3 sub-modules. They are $RCP^{Mobility}$(RCP Mobility System), $RCP^{Interaction}$, and $RCP^{Integration}$. The main focus of this paper is on $RCP^{Mobility}$ which combines an autonomous navigation system of the RT mobility with CP. Through $RCP^{Mobility}$, we are able to provide CP with robotic functions such as auto-charging and real-world robotic entertainment. Ultimately, CP may become a robotic pet to the human beings. $RCP^{Mobility}$ consists of various controllers. Two of the main controllers are trajectory controller and self-localization controller. While the former is responsible for the wheel-based navigation of RCP, the latter provides localization information of the moving RCP With the coordinates acquired from RFID-based self-localization controller, trajectory controller refines RCP's movement to achieve better navigation. In this paper, a prototype of $RCP^{Mobility}$ is presented. We describe overall structure of the system and provide experimental results on the RCP navigation.