• Journal of the Economic Geographical Society of Korea
• /
• v.27 no.1
• /
• pp.38-52
• /
• 2024

Digital transformation industry contributes to the improvement of productivity in overall industrial production, the smart green industry for carbon neutrality and sustainable growth is growing as a future industry. The purpose of this paper is to explore the status and role of the industry in the future industry innovation ecosystem through the analysis of the growth drivers and location pattern changes of the smart green industry. The industry is on the rise in both metropolitan and non-metropolitan areas, and the growth of the industry can be seen in non-metropolitan and non-urban areas. In particular, due to the smart green industrial complex pilot project, the creation of Gwangju Jeonnam Innovation City, and the promotion of new and renewable energy policies, the emergence of core aggregation areas (HH type) in the coastal areas of Honam and Chungcheongnam-do, and the formation of isolated centers (HL type) in the Gyeongsang region, new and renewable energy production companies are being accumulated in non-metropolitan areas. Therefore, the smart green industry is expected to promote the formation of various specialized spokes in non-urban areas in the future industrial innovation ecosystem that forms a multipolar hub-spoke network structure, where policy factors are the triggers for growth.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.91-98
• /
• 1988

This study was carried out to investigate the Pollution of heavy metals in Soil, collected from the 50 sampling sites in 1986. The results were as follows; 1. In the average contents of Cd, the highest value was 0.33mg/kg in the Industrial area, the lowest value was 0.06 mg/kg in the Greenbelt and 0.10-0.22mg/kg in the other areas. 2. In the average contents of Cu, the highest value was 33.46mg/kg in the Industrial area, the lawest value was 3.79mg/kg in the Greenbelt and 4.69-12.21mg/kg in the other areas. 3. In the average contents of As, the highest value was 1.80mg kg in the Residential area, the lowest value was 0.43mg/kg in the Greenbelt and 0.64-1.65mg/kg in the other areas. 4. In the average contents of Zn, the highest value was 29.84mg/kg in the out wall of Seoul, the lowest value was 17.32mg/kg in the Greenbelt and 19.62-26.71mg/kg in the other areas. 5. In the average contents of Pb, the highest value was 17.09mg/kg in the Industrial area, the lowest value was 5.21mg/kg in the Reclamated waste and 5.67 -14.10mg/kg in the other areas. 6. Distribution of Heavy metals was Zn>Cu>Pb>As>Cd and the relations of Zn-Cd, Pb-Cd, Pb-Cu, Pb-Zn were shown the correlation significantly (P< 0.01).

• Journal of Korea Water Resources Association
• /
• v.38 no.12 s.161
• /
• pp.1009-1020
• /
• 2005

In this paper, impervious area ratios for 11 land cover types of Seoul city were estimated and corresponding CNs were calculated. And linear regression equations were derived to predict impervious area ratios based on five major urban land cover types including the residential, industrial, transportation, commercial, and commercial-residential mixed areas. From the comparative analysis of impervious area ratios for the US SCS CNs and the CNs derived in this study for Seoul city, it is revealed that residential areas show the biggest difference followed by industrial and commercial ones. And in turn, these increased impervious area ratios resulted in Increased CNs for Seoul city including increases by 13 for residential, 12 for industrial and 5 for commercial areas. Therefore, it is suggested that applying the US SCS CNs to Korean urbanized areas may underestimate the flood runoff potential.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.5
• /
• pp.337-340
• /
• 2008

This study was conducted to compare the contents of fatty acids and phytosterols in Glehnia littoralis according to habitat areas. In leaves of G. littoralis collected from Yeong-deok, fatty acids contents was higher than that of the other aeras, while there was no difference in contents of roots and seeds according to habitat areas. Average phytosterols contents of 10 habitat areas were $3.8{\mu}g\;g^{-1}$ (campestreol) $16.8{\mu}g\;g^{-1}$ (stigmasterol) and $3.7{\mu}g\;g^{-1}$ ($\beta$-sitosterol), respectively. G. littoralis collected from Uljin showed the highest phytosterols contents than that of the other aeras.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.4
• /
• pp.281-292
• /
• 1998

Ambient concentrations of gaseous, particulate phase ionic species, and VOCs (volatile organic compounds) were measured at two monitoring sites in the City of Ulsan during August 1997: one in industrial area and the other in downtown area. At each site, a three- stage filter pack sampler was used to collect fine particles and gaseous species, and air for VOC analysis was collected in stainless steel canisters. Concentrations of the ionic species at both sites were similar to each other. The VOC concentrations at the industrial site were approximately twice higher than those at the downtown site. This might be mainly due to the release of VOCs from the petrochemical industries. Daily variations of VOC concentrations at the industrial site were higher than that at the downtown site. This might be explained by the fact that emissions from industries were more irregular than those in downtown. The VOC concentrations in downtown were affected by both the local emissions and the emission from the petrochemical industries. The concentrations of selected hazardous organic components (HAPs) at the industrial site were similar to those of Yocheon industrial area but slightly higher than other cites and industrial areas, while those at the downtown site were comparable to those in other urban areas.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.274-282
• /
• 2008

Ships' hull is typically protected by a combination of protective coating system and electrical cathodic protection system, which has been an economical and effective measure for ship's hull to date. However, ships' rudder and adjacent hull areas are known to be subjected to premature corrosion damages, which require more frequent coating repair than other hull areas. Conventional organic coating system for ship's hull has been known only to remain intact just for 2~3 months on the rudder and adjacent area, especially for the fast-going ships such as container carriers or naval vessels. In this study, special organic/inorganic coating materials, which are commercially available, were tested in terms of cavitation resistance as an alternative to existing rudder & hull protection system. Both standard ultrasonic tester and in-house developed ultra water jet test method were employed as a means to evaluate their performance against cavitation induced damages. Additionally, the overall cost evaluation and workability at actual shipyard were discussed.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.99-105
• /
• 2011

Recently, smartphones have been widely used in wireless communications which caused severe data overload in cellular networks. Cellular companies consider increasing wireless data capacity in overloaded areas. Determining overloaded areas is mainly made from user reports which are currently collected by calling or simple apps by some active users experiencing overloads. Since the current reporting method is inconvenient and does not contain detail information about the overload conditions, and therefore is used by only some active users, the overloaded areas determined from the reports are not likely to be accurate. Therefore, we need a new reporting method which is convenient enough for even inactive users to willingly report the overload condition and which delivers detail information about the overloads. In this paper, we design and implement a measurement function of smartphone's WCDMA communication quality including overload condition and management system of mobile wireless communication networks about smartphones' communication quality.

• International Commerce and Information Review
• /
• v.6 no.2
• /
• pp.129-146
• /
• 2004

Nowadays, practical use of the internet is generalized in enterprise's business management as well as individual's everyday life. Also using internet, E-trade has given the very important meaning to company which do import and export as a part for extension of more opportunities and business scopes. In this study, I examined the actual conditions of industrial frame and information level in Gwangju Chonnam areas to achieve the easy and wide using of e-trade systems. Next, I examined the present condition and problem of education systems regarding e-trade expert incubator program of Gwangju Chonnam area. Finally, this study presented the successful cooperation model of Chosun university TI center in industrial section, educational section, and government section for more effective development systems of e-trade expert incubator program.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2018

It is very important to classify explosion hazardous area in order to prevent an accident explosion. In order to prevent such a explosion, the Industrial Safety and Health Standards Rules stipulates the establishment and management of explosion hazards in accordance with the criteria set by the Korean Industrial Standards. This study has investigated the range of the explosion hazardous area according to various hole sizes, pressures, vapor densities, and wind velocities in the outdoor flammable liquid tank using KS C IEC-60079-10-1 $2^{nd}$ Ed.(=IEC CODE) and PHAST. The results show that the explosion hazardous areas by IEC CODE have circle shapes. However, the areas by PHAST show ellipse shapes. The different of the explosion hazardous areas increases with the increase of wind velocity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.1023-1029
• /
• 2011

In the industrial vision systems, image correction has great influence on the overall performance of measurement or inspection. The overall area of distorted image is usually splitted into small control areas, and each area is corrected by its control points. The performance of correction methods using control points can be improved by reduction of control areas because the computational time and memory highly depend on the number of control areas. We develop a merging algorithm that reduces control areas and preserves the correction accuracy. The algorithm merges the splitted control areas by use of quad tree method. Experimental results are presented to verify the usefulness of the proposed method.