• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.241-251
• /
• 1998

There are two methods of load balancing for detail scheduling : One method is to generate an initial schedule and obtain an improved final schedule by load balancing only during a specific period. The other method is to generate an initial schedule and obtain an improved schedule by load balancing from current date(TIMENOW) to unlimited time with the whole manufacturing processes. This paper proposes an algorithm for detail scheduling which can be a practical solution in job shop production or project job type by applying the former method.

• Journal of the Korean Statistical Society
• /
• 제11권1호
• /
• pp.12-24
• /
• 1982

Selection procedures are proposed for selecting the 'best' industrial process with the smallest fraction defective. For normally distributed industrial processes, this is equivalent to selecting in terms of coefficients of variation. For the case of known vairances, selection procedures by Bechhofer (1954), and Bechhofer and Turnball (1978) are appropriate. We treat this problem for the case of uknown variances with or without reference to a standard. The large sample solutions of design constants are tabulated and the performance of these approximate solutions are investigated.

• 품질경영학회지
• /
• 제12권1호
• /
• pp.31-34
• /
• 1984

The industrial sector is the largest energy consumer, accounting for 44% of the total energy consumption of Korea in 1981. Energy conservation in the industrial processes is one of the most important strategies to the energy conservation to the nation. This paper introduces principles of energy conservation which is the maximum thermodynamic efficiency in energy use. Two important factors considered are how much heat is available and how good is the heat available (the quality of energy).

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.81-88
• /
• 1996

As international commerce pattern changes toward the system of developed countries market competition, developing countries experience difficulties in international commerce market. Developed countries request their trading counterparts to obtain environment restriction. We also endure the environmental pollution due to industrialization. These environmental problems force Western Europe countries to install Environment Management System. This article presents description of development processes of ISO 14000 draft, compares ISO 9000 with 7750 requirements, and describes the common points and differences between ISO 9000 and 14000 draft.

• 산업경영시스템학회지
• /
• 제26권3호
• /
• pp.1-9
• /
• 2003

Databases are central to business information systems and RDBMS is most widely used for the database system. Normalization was designed to control various anomalies (insert, update, delete anomalies). However, normalized database design does not account for the tradeoffs necessary for performance. In this research, I model a database design method considering denormalization of duplicating attributes in order to reduce frequent join processes. This model considers response time for processing each select, insert, update, delete transaction, and for treating anomalies. A branch and bound method is proposed for this model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.150-155
• /
• 2006

Carbon nanotubes backlight unit (CNT-BLU) that lightened by field emission was developed into practicability. According to our novel structure, AC mode circuit design and simple printing process, CNT-BLU could achieve 85% of uniformity, 8000 nits of brightness and low material and fabrication cost. Based on these performances, this new planar backlight technology has chances to proceed to mass production and has the potential to replace traditional backlight technology because of its good properties, like the simple processes, easy to large scale, low surface temperature, low power consumption, optical film-free and Hg-free, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.18-18
• /
• 1996

This paper reviews some of the most prominent and promising areas of chemical process control both in relations to batch and continuous processes. These areas include the modeling, optimization, control and monitoring of chemical processes and entire plants. Most of these areas explicitly utilize a model of the process. For this purpose the types of models used are examined in some detail. These types of models are categorized in knowledge-driven and datadriven classes. In the areas of modeling and optimization, attention is paid to batch reactors using the Tendency Modeling approach. These Tendency models consist of data- and knowledge-driven components and are often called Gray or Hybrid models. In the case of continuous processes, emphasis is placed in the closed-loop identification of a state space model and their use in Model Predictive Control nonlinear processes, such as the Fluidized Catalytic Cracking process. The effective monitoring of multivariate process is examined through the use of statistical charts obtained by the use of Principal Component Analysis (PMC). Static and dynamic charts account for the cross and auto-correlation of the substantial number of variables measured on-line. Centralized and de-centralized chart also aim in isolating the source of process disturbances so that they can be eliminated. Even though significant progress has been made during the last decade, the challenges for the next ten years are substantial. Present progress is strongly influenced by the economical benefits industry is deriving from the use of these advanced techniques. Future progress will be further catalyzed from the harmonious collaboration of University and Industrial researchers.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.95-103
• /
• 2015

Objectives: This study was conducted in order to better understand the conceptual model and Stoffenmanager nano module and apply it to the synthesis and packing processes of nanomaterials. Methods: Site visits were conducted to five nanomaterial production processes. Product and exposure variables were investigated in these workplaces. Hazard banding and exposure classification of the synthesis and packing processes of nanomaterials were conducted using documents and the website of Stoffenmanager Nano. Results: The five sites featured different products, packing tasks, ventilation and local exhaust, and others. The hazards for nano-nickel and copper were classified as E. The hazards for both fumed silica and indium tin oxide were classified as D. The hazard for spherical silica was classified as C. The exposure classes in the synthesis process of nanomaterials ranged from 2 through 4. The exposure classes in the packing process of nanomaterials ranged from 1 through 4. Conclusions: Application of Stoffenmanager nano to the synthesis and packing processes of nanomaterials helped to better understand the control level of the work environment and to suggest appropriate actions. The comparison of each process showed the effect of the production process and handling of solids and ventilation on exposure class.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.28-33
• /
• 2013

During the cold forming, due to high working pressure acting on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. The mechanisms of wear are consisted of adhesion, abrasion, erosion and so on. Die wear affects the tolerances of formed parts, metal flow, and costs of process. The only way to control these failures is to develop a prediction method on die wear suitable in the design state in order to optimize the process. The wear system is used to analyse 'operating variables' and 'system structure'. In this study, with AISI D2, AISI 1020, AISI 304SS materials, a series of the wear experiments of pin-on-disk type to obtain the wear coefficients from Archard's wear model and the upsetting processes are carried out to observe the wear phenomenon during the cold forming process. The analysis of upsetting processes are performed by the rigid-plastic finite element method. The result of the analysis is used to investigate the die wear the processes, and the analysis simulated die wear profiles are compared with the experimental measured die wear profiles.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.457-464
• /
• 2016

The most wind farm development process in Korea still have not been defined since the history of the wind farm development experiences are very short compared to EU and other developed countries. Therefore, most wind farm development company and researchers have a lot of trouble to implement the wind farm development and need a guideline for the process. Establishing the wind farm needs a complex processes such as transportation system, construction conditions, natural environment and wind conditions etc. Specially, for the restricted development area, the social negotiation and legal minds are necessary. In the case, the decision making process of suitable wind farm area using GIS tool is very useful. However, before using GIS technique, we should understand the development processes and the items for surveying tools. Recently, suitability analysis of selecting Onshore Wind Farm has been studied to consider exclusion analysis to solve the limited develop condition problem. This paper proposed the onshore wind farm development process which can suitable to Korea wind farm environment based on European guideline with GIS tool. To estimate the processes, the processes are divided into two parts, the basic design and wind farm planning. Next, the planning stages are classified into five stages in which the factors for each step were considered.