• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.2
• /
• pp.68-73
• /
• 2002

Many paper about the adaptive algorithm based to LS(Least Square) to improve convergence speed are already presented. In this paper, we propose a wavelet based adaptive algorithm which improves the convergence speed and reduces computational complexity, and adapt two kinds of adaptive noise cancelers using the characteristic of speech signal. We compared the performance of the nosed algorithm with time and frequency domain adaptive algorithm using computer simulation of adaptive noise canceler based on synthesis speech. As the result the proposed algorithm is suitable for adaptive signal processing area using speech or acoustic signal.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.4
• /
• pp.72-81
• /
• 2003

The purpose of this paper is to propose an interactive method, which is designed to select the optimal preferred alter-native for the MLDM(Multiple-the Larger-the better type Decision-Making) problems with the-larger-the-better quality characteristics. The basic idea of the paper is essentially to eliminate inefficient alternative based on the concept of Taguchi Signal-to-Noise ratios and the cutting range instead of using UVF(Utility/value Function) on the group of attributes that can be considered importantly by the decision makers. As a result, the method proposed in the paper for MLDM problems can be significant in that the change of characteristics is transformed into the size of Signal-to-Noise ratio, which can be relatively easy to understand by decision makers.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.21-27
• /
• 2007

The power line channel has time-variant characteristics caused by various kind of electrical devices. This characteristics are synchronized with the main voltage by their own characteristics. The main factors of disturbance are the variation of the channel impedance and noises. In other papers, the synchronous noise modeling has been achieved. But the modeling is not satisfied simultaneously with the time domain and the frequency domain and there are not any discussion about short-term variations of the channel impedance which cause to the signal fading. Therefore, this paper researched to solve problems about the signal fading by analyzing the short-term variation of the channel impedance, and proposed the synchronous noise modeling which is satisfied simultaneously in the time domain and the frequency domain.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.03a
• /
• pp.141-161
• /
• 1997

팩시밀리로부터 수신된 영상은 글자를 두껍게 하는 돌출잡영(salient noise), 문자주변에 점이 추가되는 고춧가루 잡영(pepper noise), 선의절단을 일으키는 백색잡영(white noise)으로 인하여 가독성이 떨어진다. 수신된 팩시밀리 영상을 원래의 영상으로 복원하기 위하여 최근에 Handley 와 Dougherty가 처음으로 형태학적 복원 방법을 제안하였다. 형태학적 복원 방법은 돌출잡영에 대해서 효과적이었지만, 확률적으로 발생하는 백색잡영과 고춧가루잡영에 대해서는 팩시밀리 영상을 결정적 수열(deterministic sequence)로다루었기 때문에 효과적이지 못했다. 본 논문에서는 주사과정, 고딩과정, 그리고 통신과정에서 생성되는 돌출, 고춧가루, 백색잡영에 의해 훼손된 팩시밀리 영상을 칼만여과를 이용하여 복원하는 새로운 방법을 제안하였다. 제안된 방법은 모델링과 복원 두 단계로 구축된다. 첫째, 이웃 화소들과의 종속관계를 갖는 팩시밀리 영상을 마르코프 랜덤 필드를 바탕으로 팩시밀리 시스템 모델을 제안하였다. 둘째, 제안된 팩시밀리 시스템 모델을 칼만 여과과정의 시스템 모델 및 관측모델로 재구성한 다음, 칼만 여과과정의 ill-conditioned 문제를 극복하기 위하여 양정치 (positive definite)공분산 행렬을 유도하여 새로운 복원방법을 제안하였다. 제안된 방법의 복원 능력을 검증하기 위하여 사무실에서 가장 많이 사용되는 한글을 사용하여 알파벳 대소문자, 숫자, 특수문자로 구성된 문서를 만들어 실험하였다. 그 결과, 제안된 방법이 형태학적인 복원 방법보다 성능이 우수함을 밝혔다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.5-13
• /
• 2017

Noise complaints among neighbors in apartment building are mainly caused by floor impact noise that is structure born noise due to occupant induced floor vibration. To control this noise problems many researchers have investigated floor systems and finishing materials. Light-weight impact noise affects by finishing materials, but heavy-weight impact noise induced by heel impacts during normal walking or jumping of children is concerned with structural system and floor vibration. To figure out the characteristics of floor impact noise and transmission of floor vibration due to human activities, vibration tests were conducted in apartment buildings. Impact hammer, heel drop and walking activities were loaded at center of upstairs living room, and accelerations of slabs for both upstairs and downstairs and sound pressure levels for downstairs were measured. The acceleration ratio of transmitted floor vibration to downstairs and human induced vibration in upstairs was between 0.5 and 1.0 according to slab size, wall, and load type. And floor impact noise occurred in the range of natural frequency of slab.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.217-225
• /
• 1998

In this paper, the analysis of the relation between noise induced hearing loss and noise exposure is described for the A-weighted noise levels and exposure duration. The hearing loss and sensitivity threshold shift is investigated by changing the various parameters such as the effects of aging and noise exposure. Total hearing loss is proportional to a function of exposure level based upon the integral of pressure with time. If the noise exposure term is large so that the presbycusis may be neglected, the hearing loss due to aging and noise exposure becomes the noise induced hearing loss. It is shown that exposure to excessive noise can cause temporary loss of hearing that may become permanent if the exposure is prolonged or intense. An audiogram taken from a person suffering from noise induced hearing loss will usually show the greatest loss of hearing sensitivity in the 4kHz region, which is typically the region most sensitive to damage resulting from many types of industrial noise.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.95-102
• /
• 2019

The purpose of this study is to investigate the correlation between aluminum form work and noise-induced deafness by conducting special health examination on construction aluminum worker and noise measurement at the workplace. All the 11 aluminum form workers were diagnosed with noise-induced deafness after holding a special health examination. The workers have not had any previous history of noise-induced deafness which indicates that aluminum form work is related to noise-induced deafness disease. The impact noise of 120 dB(A)~125 dB(A), which exceeds the regulations of industrial safety and health act, was found during the dismantling rather than installation when noise measurement was made at the aluminum workplace. The aluminum form workers could permanently lose the hearing sense if they are exposed to this impact noise. This study is to suggest the method to prevent noise-induced deafness for aluminum form workers by firstly giving out hearing protection equipment at the construction site and secondly installing rubber mat, soundproof panel as well as changing the noise-lowering technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.310-319
• /
• 2020

Korea estimates the traffic noise by measuring the total traffic noise when the traffic passes (SPB; Statistical Pass-By). Another method (CPX; Close Proximity) directly measures the tire/road noise by installing a microphone near the tire. The CPX method is not a formal test method in Korea. There has been little research between CPX and SPB. This study proposes a method for estimating SPB, using the CPX, which is easy to measure. This study used the results of a large-scale test conducted by Korea Expressway Corporation (KEC) and a research paper on CPX in this section. The results by the KEC showed that the low noise pavement has a noise reduction of 10.4dB. In CPX research, the noise reduction was 10.7dB and was similar to 10.4dB in SPB. This study shows why the noise reduction is the same regardless of the position, the reason that the amount of noise reduction is similar, the difference of the noise according to the position of the microphone using the concept of noise summation and distance reduction. This study shows that including the CPX as a variable in the traffic noise prediction program is very important to improve noise prediction reliability.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.996-1002
• /
• 2009

Elimination of squeal noise occurred during brake application is an important task for the improvement of comforts in an industrial forklift. In this paper, a test rig was developed which was possible for testing of brake noise and an experimental measurement on squeal noise was performed. The causes of the brake noise are identified by experimenting how the factors such as automatic transmission fluid and rpm of drive axle affect the squeal. In order to identify the squeal characteristics, the signal analyses for noise are performed by using frequency spectrums. Also, brake test using a forklift was carried out to confirm the reliability of test results by using a test rig comparing with the occurrence of squeal noise. Experimental results showed that the tendencies of occurrence of squeal noise are well agreed at two test methods by using the test rig and forklift.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.728-735
• /
• 2017

With the proliferation of digital devices, the devices have generated considerable additive white Gaussian noise while acquiring digital images. The most well-known denoising methods focused on eliminating the noise, so detailed components that include image information were removed proportionally while eliminating the image noise. The proposed algorithm provides a method that preserves the details and effectively removes the noise. In this proposed method, the goal is to separate meaningful detail information in image noise environment using the edge strength and edge connectivity. Consequently, even as the noise level increases, it shows denoising results better than the other benchmark methods because proposed method extracts the connected detail component information. In addition, the proposed method effectively eliminated the noise for various noise levels; compared to the benchmark algorithms, the proposed algorithm shows a highly structural similarity index(SSIM) value and peak signal-to-noise ratio(PSNR) value, respectively. As shown the result of high SSIMs, it was confirmed that the SSIMs of the denoising results includes a human visual system(HVS).