• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.605-610
• /
• 2008

Through welding fabrication, user can feel unsatisfaction of surface quality because of welded defects, Generally speaking, these are called weld defects. For checking these defects effectively without time loss effectively, weldability estimation system setup is an urgent thing for detecting whole specimen quality. In this study, by laser vision camera, catching a rawdata on welded specimen profiles, treating vision processing with these data, qualitative defects are estimated from getting these information at first. At the same time, for detecting quantitative defects, whole specimen weldability estimation is pursued by multifeature pattern recognition, which is a kind of fuzzy pattern recognition. For user friendly, by weldability estimation results are shown each profiles, final reports and visual graphics method, user can easily determined weldability. By applying these system to welding fabrication, these technologies are contribution to on-line weldability estimation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.203-208
• /
• 2019

Digital watermarking was developed to protect copyright by discouraging the illegal copying of digital content. On the other hand, recently, watermarking has also been used to verify the integrity of digital content, such as medical images, and detect illegal manipulation or distortion locations. Watermarking should be tenacious so as to protect copyright from illegal copying and should remain firm to the content through a range of attacks, such as distortion or filtering. At the same time, however, it should be removed easily even in a slight transformation of the material to verify the integrity. Therefore, this paper proposes a watermarking technique that easily checks and verifies the deformation or manipulation of digital images. In the proposed method, the entire image was examined in $16{\times}16$ blocks to check for deformation of the image. When deformation was detected, further inspection proceeded in $4{\times}4$ blocks and the location where deformation occurred was identified.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.199-212
• /
• 2019

Digitalization is creating a variety of changes and innovations in our business environment. In manufacturing, robots have long been used for automation to innovate processing speed and quality. The RPA brings these innovations in manufacturing sites to the office space. The purpose of this study is to improve productivity for simple, repetitive tasks in these office space. For identify the potential of automation related to productivity improvement, I looked at the concept of business automation, and then simulated the five areas of business documentation works with agile methodology. In conclusion, I confirmed that productivity improvement of 97.3% in quality inspection and 31.7% in editorial design is possible, and examined the direction to apply to actual work. Based on these results, future study will explore the application of Intelligent Process Automation (IPA).

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.15-21
• /
• 2019

X-rays with shorter wavelengths than ultraviolet light have very good penetration power. It is convergence in industrial and medical fields has been used a lot. n particular, in the industrial field, various researches have been conducted on the detection of foregin body inside metal that can occur in the production process of products such as metal using x-ray, a non-destructive inspection device. Detectors are becoming increasingly popular for the popularization of DR (Digital Radiography) photography methods that digitally acquire X-ray video images. However, there are cases where foreign body detection is impossible depending on the sensor noise and sensitivity inside the detector. When producing a metal product, since the defective rate of the produced product may increase due to contamination of the foreign body, accurate detection is necessary. In this paper, we provide a correction model for X-ray images acquired in order to improve the efficiency of defect detection such as foreign body inside metal. When applied to defect detection in the production process of metal products through the proposed model, it is expected that the detection of product defects can be processed accurately and quickly.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.217-223
• /
• 2019

A study in predicting defects of spot welding in real time in automotive field is essential for cost reduction and high quality production. Welding quality is determined by shear strength and the size of the nugget, and results depend on different independent variables. In order to develop the real-time prediction system, multiple regression analyses were conducted and the two dependent variables were obtained with sufficient statistical results with three independent variables, however, the quality prediction by the regression formula could not ensure accuracy. In this study, a multi-layer neural network circuit was constructed. The neural network by 10 dynamic resistance variables was constructed with three hidden layers to obtain execution functions and weighting matrix. In this case, the neural network was established with three independent variables based on regression analysis, as there could be difficulties in real-time control due to too many input variables. As a result, all test data were divided into poor, partial, and modalities. Therefore, a real-time welding quality determination system by three independent variables obtained by multiple regression analysis was completed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.327-332
• /
• 2021

At the package level, semiconductor reliability inspections involves mounting a semiconductor chip package on a test socket. The form of the test socket is basically determined by the form of the chip package. It also acts as a medium to connect with test equipment through mechanical contact of the leads and socket leads in the chip package, and it minimizes signal loss in a signal transmission process so that an inspection signal can be delivered well to the semiconductor. In this study, a technique was applied to examine the interdependence of adjacent electrical transfer routes and the structure of adjacent electrical transfer paths. The goal was to enable short-circuit testing of fewer than 100 silicon test sockets through a single interface for life tests and precision measurements. The test results of the developed device show a test precision of 99% or more and a simultaneous test speed characteristic of 0.66 sec or less.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.507-519
• /
• 2022

Purpose: This study propose efficient and practical measures to comply with the duty to secure safety and health of the Serious Accidents Punishment Act at small businesses. Method: Based on literature review and previous studies, a plan to comply with the Serious Accidents Punishment Act was reviewed by the link with the safety and health management system and using the process approach method, etc. Result: It was confirmed that if the safety and health management system is faithfully implemented, it is possible to comply with the duty to secure safety and health under the Serious Accidents Punishment Act. In addition, a methodology for fulfilling and inspecting the duty to secure safety and health was presented. Conclusion: If the safety and health management system is operated actively by utilizing the process approach and implementation inspection checklist, it is judged that it will be possible to comply with the Serious Accidents Punishment Act as well as to continuously improve the safety and health management system.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.139-145
• /
• 2022

As products that consumers want become more diverse, the types of automation equipment are becoming more diverse and advanced to produce competitive products. In general, equipment is manufactured with built-in interface devices (HMI) for users so that operators can efficiently monitor and operate equipment quickly. Because HMI devices are connected to various industrial controllers, elements such as communication protocols of various controllers must be understood and set up in the design stage. Non-experts not only have difficulty choosing compatible items among various protocols, but also have limitations in integrating and operating on one device because screens and settings are statically assigned. This paper proposes a model that can scan information such as equipment ID and communication protocol with QR code using a mobile device, access industrial controller, and remotely operate the displayed equipment screen. The proposed model is expected to increase efficiency in inspection and management of automated equipment as it can easily set, monitor, and operate the communication environment of various automated equipment using one mobile device.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.285-292
• /
• 2023

As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens' daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.849-854
• /
• 2023

The Korea Post is providing postal, savings, and insurance services to the public. Although it has been automated due to the development of the industry, the risk of industrial accidents is high. Safety and health education should be effectively conducted to reduce industrial accidents. In this study, a survey was conducted for postal service workers. As a result, there was a tendency to prefer instructors with technical experience and professional qualifications, and increasing direct participation training through on-site inspection and audio-visual training and hands-on training were found to be helpful. analyzed. Based on this, an efficient safety and health education plan was presented to improve safety and health awareness, and it can be used as a basic data