• Journal of the Korean earth science society
• /
• v.45 no.1
• /
• pp.72-84
• /
• 2024

Recently, the vulnerability of water resources has been increasing owing to climate change, highlighting the importance of groundwater. In particular, the Nakdong River Basin, located in the southern part of Korea, experiences frequent water scarcity phenomena, such as droughts. This study analyzed the hydrogeological characteristics of the study area by examining groundwater and stream water in the Gwangrye Stream, downstream of the Nakdong River Basin, in August and October 2023. Therefore, we collected samples from 54 groundwater wells and five streams for water quality analysis. The results of the field tests indicated an increasing trend in electrical conductivity from upstream to downstream in the study area. Laboratory analyses confirmed that the concentration of Na increased from upstream to downstream more than that of Ca. In conclusion, both stream water and groundwater were influenced by anthropogenic contamination. These changes were closely related to land use in the study area. The upstream areas are primarily composed of forests, whereas the downstream areas are composed of industrial complexes, wastewater treatment facilities, and agricultural areas, which are likely to affect both stream water and groundwater.

• Particle and aerosol research
• /
• v.19 no.4
• /
• pp.111-128
• /
• 2023

Chungcheongnam-do has various emission sources, including large-scale facilities such as power plants, steel and petrochemical industry complexes, which can lead to the severe PM pollution. Here, we measured concentrations of PM₁₀, PM_2.5, and its metallic elements at a suburban site in Taean, Chungcheongnam-do from September 2017 to June 2022. During the measurement period, the average concentrations of PM₁₀ and PM_2.5 were 58.6 ㎍/m³ (9.6~379.0 ㎍/m³) and 35.0 ㎍/m³ (6.1~132.2 ㎍/m³), respectively. The concentration of PM₁₀ and PM_2.5 showed typical seasonal variation, with higher concentration in winter and lower concentration in summer. When high concentrations of PM_2.5 occurred, particulary in winter, the fraction of Zn and Pb components considerably increased, indicating a significant contribution of Zn and Pb to high-PM_2.5 concentration. In addition, Zn and Pb exhibited the highest correlation coefficient among all other metallic elements of PM_2.5. A backward trajectory cluster analysis and CPF model were performed to examine the origin of PM_2.5. The high concentration of PM_2.5 was primarily influenced by emissions from industrial complexes located in the northeast and northwest areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.577-585
• /
• 2024

Infrastructure plays a crucial role in the industrial development and economic growth of a nation. However, recently, domestic infrastructure has been causing not only safety risks due to aging but also social and economic inefficiencies, increasing the need for maintenance. In particular, the deterioration rate of bridges is serious, so application of appropriate repair and rehabilitation methods and estimation of its quantity are required. In this study, frequently applied repair methods for bridges using data from the Facility Integrated Management System (FMS) were identified. the empirical correlation between damage volume and the repair volume was analyzed using Bridge Management System (BMS) data. The result of the analysis showed that the ratio of the repair volume to the damage volume was 1.0. The guideline, on the other hand, suggest 1.5 the ratio of the repair volume to the damage volume. Although the guidelines differently present more conservative figures considering safety, this study is significant in that it presents a practical ratio through data analysis results. This results can be used to develop a model that can calculate the amount of repair and rehabilitation of various facilities in the future.

• Microbiology and Biotechnology Letters
• /
• v.52 no.1
• /
• pp.1-14
• /
• 2024

This study focused on isolating and identifying strains from the gut of Epinephelus akaara cultivated in aquaculture facilities on Jeju Island. The aim was to evaluate the potential of utilizing these strains as probiotics for industrial applications. A total of 129 strains were isolated from the gut of E. akaara and screened based on their ability to create a clear zone of 10 mm or more in a preliminary antimicrobial activity test. Twelve strains were selected for further analysis, including bile resistance, acid tolerance at different pH levels, antioxidant activity, antibiotic susceptibility, and biochemical characteristics using the API kit. Through these characteristic experiments, eight strains (G1, G3, G15, G21, B1, B2, B3, B5) were identified as having potential as probiotics. Among these, the B group strains (B1, B2, B3, B5) exhibited significantly higher activity compared to the G group strains (G1, G3, G15, G21). Based on the phylogenetic analysis of the 16S rRNA gene sequences of the selected microorganisms, the strains were named as follows: B1 strain as Lactobacillus paracasei B1, B2 strain as Lactococcus lactis B2, B3 strain as Lactobacillus plantarum B3, B5 strain as Lactococcus lactis subsp. hordniae B5, G1 strain as Bacillus licheniformis G1, G3 strain as Bacillus velezensis G3, G15 strain as Brevibacterium frigoritolerans G15, and G21 strain as Bacillus pumilus G21.

• Journal of Internet Computing and Services
• /
• v.25 no.4
• /
• pp.23-37
• /
• 2024

Digital twin is an M&S (Modeling and Simulation) technology designed to solve or optimize problems in the real world by replicating physical objects in the real world as virtual objects in the digital world and predicting phenomena that may occur in the future through simulation. Digital twins have been elaborately designed and utilized based on data collected to achieve specific purposes in large-scale environments such as cities and industrial facilities. In order to apply this digital twin technology to real life and expand it into user-customized service technology, practical but sensitive issues such as personal information protection and personalization of simulations must be resolved. To solve this problem, this paper proposes a federated learning-based accelerated client training method (FACTS) for personalized digital twins. The basic approach is to use a cluster-driven federated learning training procedure to protect personal information while simultaneously selecting a training model similar to the user and training it adaptively. As a result of experiments under various statistically heterogeneous conditions, FACTS was found to be superior to the existing FL method in terms of training speed and resource efficiency.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.16-34
• /
• 1995

This study aims to analyze the impact of cement industry on region change. For this study Maepo-Eub was selected as study area, where three cement factories are located. The data for analysis were obtained from interviews, questionaire surveys and the employee list of each cement factory. The analytic procedures for this study are as follows: 1) The change of regional employment was analyzed by development was industry in terms of the permanent address, education level, occupational status of the employee. 2) The degree of population growth are analyzed by developmental staae of the industry. Some conclusions from this study follows: 1) As these cement factories were built at Maepo in the 1960's, there were plenty of employment opportunities. Thus many technicians and workers flooded in Maepo-Eub. in the 1970's with the expansion of production facilities therewere much more immigrants to the industrial region, while there were outflow in the neighboring rural areas. In the 1980's the opportunity for the employment of cement factories have been decreased due to the introduction of the automation processes and larger, sized machines. Among the employee of three cement factories the native of Chungcheongbukdo (65%; in them Danyang 52%, Jecheon 32%) is dominant, the second is from Kangwon-do (13%), and the third is from Kyungsangbuk-do (11%) adjacent to Chungcheongbuk-do. It means that there are more employment opportunity in the near places of cement factories. 2) In the period of 1960's study area had experineed rapid social increase in population by the development of cement industry. That is, cement industries created new job opportunities and attracted large population concentration into this area. In the period of 1970's the population of the industrial region have increased continuously, while the population of neighboring rural areas have decreased. In the period of 1980's the population of Maepo decreased steadily because of decrease of labour forces through automation and commuting. Thus in the early stage of idustrial development large population concentrated in the neighboring villages of cement factories, and formed residential areas, commercial areas and service areas. As agricultural and was encroached, rural people left their regions to live in the more convenient suburbs. 3) People engaged in cement industry think that cement industry has a favorable influence on regional development, such as creating job opportunity, raising income level, developing business and service sector, and leading high economic growth. While farmers and some people think that cement industries as a pollution causing factories have a harmful influence on regional development, sucha as injuring the crops, causing environmental pollution, and being harmful to health. If pollution problems are solved, I think Maepo will play an important role as a regional center which can offer employment opportunity, business and service function to pheripheral rural areas, and raise a income level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4557-4563
• /
• 2012

The purpose of this study is to suggest the criteria to public welfare service support for improving life quality of the haenyeo (female divers) through analyzing public welfare services and desires of the haenyeo in Jeju, Busan, and Tongyeong. Accordingly, research period was set from May 11 to June 21, 2010. The haenyeo in each region of Jeju, Yeongdo-gu (Busan), Tongyeong-si were selected as subjects. Recording of interviewing methods was used to recognize current status of public welfare. We analyzed by comparing desires of the haenyeo to public welfare services by dividing them economically, medically, educationally, and culturally. As a result of researching public welfare services to the haenyeo in each region, supports for protection of diving, growing area, public welfare service for aged diving haenyeo, and medical service were conducted. Tewak protecting net, Seonjinji visiting, and welfare facilities are supported in Busan-si but there is no support in Tongyeong-si. Therefore, desires of the haenyeo to such public welfare services are as followings: First, the desires of the haenyeo in Jeju to economic supports are indicated as supports for haenyeo experience spot, diving suit, and overseas visiting. To educational supports, it is indicated as supports for identity education, diving disease prevention education, and foreign language education. To cultural supports, it is indicated as supports for installation of welfare hall and exchange visit to foreign haenyeo culture. Second, in Busan, there were desires to establish changing room and fishery sales lot and to support diving suit as for economic supports, desires to support diving disease and medical benefits as for medical supports, desires to education of diving skill as for educational supports, and desires to establish welfare hall and haenyeo museum as for cultural supports. Third, in Tongyeong where public welfare services to the haenyeo are very poor, there were desires to support diving suit and to support changing room as for economic supports, as same as in Busan, desires to support diving disease and medical benefits as for medical supports.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of the Korean Geographical Society
• /
• v.30 no.2
• /
• pp.146-168
• /
• 1995

problems involved in defining and identifying it. However, data on ownership of business establishments may be useful and one of the best alternatives for this empirical research because of use of limited information about control This study examines the spatial patterns of external control in the Korean manufacturing activities between 1986 and 1992. Using the data on ownership iinkages of multilocational firms between 15 administrative areas, it was possible to construct a matrix of organizational control in terms of the number of establishments. The control matrix was disaggregated by three types of manufacturing industries according to the capital and labor requirements of production processes used in. On the basis of the disaggregated control matrix, a series of measures were calculated for investigating the magnitude and direction of control as well as the external dependency. In the past decades Korean industrialization development has risen at a rapid pace, deepening integration into the world economy, together with the continuing growth of the large industrial firms. The expanded scale of large firms led to a spatial separation of production from control, Increasing branch plants in the nation. But recent important changes have occurred in the spatial organization of production by technological development, increasing international competition, and changing local labor markets. These changes have forced firms to reorganize their production structures, resulting in changes of the organizational structures in certain industries and regions. In this context the empirical analysis revealed the following principal trends. In general term, the geography of corporate control in Korea is marked by a twofold pattern of concentration and dispersion. The dominance of Seoul as a major command and control center has been evident over the period, though its overall share of allexternally controlled establishments has decreased from 88% to 79%. And the substantial amount of external control from Seoul has concentrated to the Kyongki and Southeast regions which are well-developed industrial areas. But Seoul's corporate ownership links tend to streteh across the country to the less-developed regions, most of which have shown a significant increase of external dependency during the period 1986-1992. At the same time, a geographic dispersion of corporate control is taking place as Kyongki province and Pusan are developing as new increasingly important command and control reaions. Though these two resions contain a number of branch plants controlled from other locations, they may be increasingly attractive as a headquarters location with increasing locally owned establishments. The geographical patterns of external control observable in each of three types of manufacturing industries were examined in order to distinguish the changing spatial structures of organizational control with respect to the characteristics of the production processes. Labor intensive manufacturing with unskilled iabor experienced the strongest external pressure from foreign competition and a lack of low cost labor. The high pressure expected not only to disinte-grate the production process but also led to location of production facilities in areas of cheap labor. The linkages of control between Seoul and the less-developed regions have slightly increased, while the external dependency of the industrialized regions might be reduced from the tendency of organizational disintegration. Capita1 intensive manufacturing operates under high entry and exit barriers due to capital intensity. The need to increase scale economies ied to an even stronger economic and spatial oncentration of control. The strong geographical oncentration of control might be influenced by orporate and organizational scale economies rather than by locational advantages. Other sectors experience with respect to branch plants of multilocational firms. The policy implications of the increase of external dependency in less-developed regions may be negative because of the very share of unskilled workers and lack of autonomy in decision making. The strong growth of the national economy and a scarcity of labor in core areas have been important factors in this regional decentralization of industries to less-developed regions. But the rather gloomy prospects of the economic growth in the near future could prevent the further industrialization of less-developed areas. A major rethinking of regional policy would have to take place towards a need for a regional policy actively favoring indigenous establishments.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.132-151
• /
• 1988

This study was conducted to establish the control program for preventing unfavorable health effects of nitrogen dioxide($NO_2$) exposure in homes by preparing the fundamental data for evaluation of relation-ships between $NO_2$ levels and influencing factors through measurements of indoor-outdoor $NO_2$ levels and personal $NO_2$ exposures for housewives with questionnaire survey on 172 homes in Pusan area from April to June, 1987 $NO_2$ measurements were made by using diffusion tube samplers(Palmes tube $NO_2$ sampler) for one week at 4 sites in homes ; kitchen(KIT), bedroom(BED), living room(LIV), outdoor(OUT) and near the collar of housewives(personal exposure livel, PNO). The details of questionnaire were number of household members(FAM), number of regular smokers (SMOKER), daily number of meals eaten(MEAL), type of housing units(HOUSE), location of house with distance from the heavy traffic roads as walking time(DIST), and of kitchen(KAREA), kind of cooking fuels(FUEL), cooking time of each meal(CTIME), usage of kitchen fan for cooking(FAN), type of heating facilities(HEAT) and so on of subject homes. The Obtained results were as fellows : 1) The mean $NO_2$ level was significantly higher at indoors than outdoors(p<0.01) and the kitchen $NO_2$ level was the highest with $33.7{\pm}13.6ppb$(9.5-81.5ppb). The mean personal exposure level of $NO_2$ for housewives was $20.6{\pm}8.8ppb$(3.1-46.9ppb). 2) The mean indoor $NO_2$ level was significantly higher in the group of household members above 5 than below 4(p<0.05), in detached dwellings than apartments(p<0.001), within 5 minutes of distance than over 5 minutes(p<0.001), in the group of unusing fan(p<0.001), in the group of longer cooking time(p<0.001), and it was in order of coal briquette, gas, electricity and oil by kind of cooking fuels(p<0.05). 3) Variables showing significant correlation(p<0.001) with indoor $NO_2$ level were kitchen $NO_2$ level(r=0.8677), cooking time(r=0.5921), outdoor $NO_2$ level(r=0.5192), personal $NO_2$ exposure level(r=0.4615), usage of kitchen fan(r=0.3573) and location of house(r=-0.2988) 4) As a result of multiple regression analysis, the most significant influencing variable to the kitchen $NO_2$ level was cooking time[KIT=$-0.378{\pm}11.772$(CTIME)+0.298(OUT)+3.102(FAN)], it was kitchen $NO_2$ level to the indoor $NO_2$ level[IND=6.996+0.458(KIT)+0.230(OUT)-1.127(KAREA)], and it was indoor $NO_2$ level to the personal $NO_2$ exposure level[PNO=15.562+0.729(IND)-4.542(DIST)-0.200(KIT)] 5) It was recognized that aritificial ventilation in the kitchen, suppression of unnecessary combustion and replacement of cooking fuel, as much as possible, were effective means for decreasing indoor $NO_2$ levels in homes.