• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.298-303
• /
• 2020

This study examined the washing conditions for high-quality solar salt. The salinity of the washing water was set to 5 % to prevent yield loss, and the temperatures of the washing water were 5, 10, 17.5, and 20 ℃. After washing the solar salt, the moisture content, salinity, insoluble matter, and sandy powder were measured from the solar salt. In addition, the color properties, L*[lightness], a*[redness], b*[yellowness], and yield were measured. The moisture content of the salt showed a tendency to increase when the temperature of the washing water was above 10 ℃, and the salinity and yield tended to decrease as the temperature of the washing water was high. The amount of insoluble matter decreased with decreasing temperature of the washing water. In the case of sandy powder, the highest value was 0.67 % at a washing water temperature of 5 ℃, and the value was 0.57 % under the other temperature conditions. Regarding the color properties, the b* [yellowness] of the color of the solar salt increased when the washing water temperature was high. This appeared to decrease the appearance quality. According to the above results, a washing water temperature above 10 ℃ was appropriate. The development of design factors of a high-quality solar salt production system is expected with experiments to define the drying conditions after the washing process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.407-416
• /
• 2020

North Korea's demand for infrastructure construction and maintenance is growing rapidly. On the other hand, the number of skilled workers is insufficient. Therefore, through a survey of North Korean defectors, this study analyzed the status of construction technology and the difficulties of construction workers. In addition, an attempt was made to derive an appropriate education and training program process and operation plan. As a result of the survey, the reason for the low technical level of construction workers was the lack of skills, lack of motivation to work, and the lack of training and management systems. The appropriate education and training period was 56% of the total response within one year and 36% within six months. Based on the results of this survey, the period of education and training for the rapid training of construction technical personnel in North Korea was adopted as one year. Moreover, compared to the NCS standard in South Korea, appropriate training hours were suggested, excluding training courses, such as planning and design, construction management that require specialized knowledge. Finally, the curriculum corresponding to the education and training courses and the standards for facility names and required areas for facility operation were suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.537-544
• /
• 2016

National Competency Standards (NCS) need to be introduced to train newly hired staff and to gradually improve employees' work performance in the information security industry. In particular, the introduction of a new NCS curriculum for new hires is important in order to retain and efficiently manage professionals in the information security field. However, the legacy NCS is not clearly designed for the information security field. So a formal curriculum has been suggested for institutions training the information security workforce. Therefore, this study establishes a competency unit based on the types of personnel, their duties, and required knowledge. To select the competency unit, this study reviewed prior research to understand the required skills and work knowledge, and reviewed recruitment-based NCS that public agencies and public and private companies have carried out, including them in the study. The selected competency unit was classified into a required competency unit and an elective competency unit based on the importance of the duties and the demands of training. Through a verification process for the new, licensed career path model in the NCS information and communications field, this study suggests updated NCS competency units and required courses to provide an appropriate NCS curriculum for newly hired employees in the information security industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.314-321
• /
• 2016

Adapting the maintenance criteria of Seoul City pavement is not applicable for borough pavement due to differences between the pavement of Seoul city and the borough, such as priority of maintenance, traffic volume, thickness of pavement, and pavement deterioration rate by distresses. To develop an efficient and reasonable evaluation method of the Seocho borough pavement condition within a limited budget, this study suggested the borough pavement condition evaluation model based on the PMS (Pavement Management System) of Seoul Metropolitan SPI (Seoul Pavement Index). The SPI was modified to predict the remaining life and determine the proper maintenance method for the pavement in Seocho borough. This was suggested to reflect the rate of the designed performance life and field performance life of pavement as well as the pavement condition at the stage of the completion of construction. Primary variables, such as crack, rutting and IRI in the final model affect the overall performance life due to their even composition. Therefore, the suggested model considering the lowered criteria, design performance factor, and construction factor can be used for the more efficient maintenance of Seocho borough pavement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.740-745
• /
• 2016

Cables are installed for tens of thousands of connections between various pieces of equipment to operate and control a commercial ship. The correct shortest-route data is necessary since these are complicated cable installations. Therefore, an overfill interval commonly exists in the shortest paths for cables as estimated by Dijkstra's algorithm, even if this algorithm is generally used. It is difficult for an electrical engineer to find the overfill interval in 3D cable models because the occupancy rate data exist in a data sheet unlinked to three-dimensional (3D) computer-aided design (CAD). The purpose of this study is to suggest a visualization method that displays the cable path and overfill interval in 3D CAD. This method also provides various color visualizations for different overfill ranges to easily determine the overfill interval. This method can reduce cable-installation man-hours from 7,000 to 5,600 thanks to a decreased re-installation rate, because the cable length calculation's accuracy is raised through fast and accurate reviews based on 3D cable visualization. As a result, material costs can also be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.132-137
• /
• 2018

Although the number of chemical accidents has been declining since the Chemical Control Act of 2015, there have been repeated occurrences of similar types of accidents at printed circuit board (PCB) manufacturing facilities. These accidents were caused by the overflow of hydrochloric acid and hydrogen peroxide, which are toxic chemicals used in the printed circuit board manufacturing process. An analysis of the $Cl^-$ content to identify the cause of the accident showed that in the mixed route of hydrochloric acid and hydrogen peroxide, which are accidental substances, the $Cl^-$ concentration was 66.85 ppm in the hydrogen peroxide sample. Through reaction experiments, it was confirmed that the deformation of a PVC storage tank and generation of chlorine gas, which is a toxic gas, occurred due to reaction heat occurring up to $50.5^{\circ}C$. This paper proposes a facility safety management plan, including overcharge, overflow prevention, leak detection device, and separation tank design for mixing prevention in printed circuit board manufacturing facility etch process. To prevent the recurrence of accidents of the same type, the necessity of a periodic facility safety inspection and strengthening of the safety education of workers was discussed.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.77-85
• /
• 2013

Objective: The aim of this study sets factors from previous research known to impact transfer effects as the independent variables, and examines their relationship with the dependent variables, near transfer effects and far transfer effects. Background: Transfer of Training refers to the application of what learners acquire knowledge and skills in training programs to their job. The ultimate goal of training is to apply what employees learn in training sessions to their workplace. In this sense, transfer of training has been a vital concern for training effectiveness. For training to be effective, trainees(learners) should be able to use what they learn in training program back on the job. Method: For this research purpose, this study conducted a survey on 170 nuclear operators in nuclear education and training center. Of these, survey result from the 167 recruits were sampled. Theoretical model of this study is based on Holton & Baldwin's(2003) distance model of transfer effects. This study sets transfer effects(near transfer, far transfer) as the main dependent variables. Meanwhile, the independent variables are trainee characteristics, training characteristics, organizational transfer climate. Each independent variable has subordinate variables. Subordinate variables of trainee characteristics are self-efficacy, motivation to learn, motivation to transfer and ability to transfer. Subordinate variables of training characteristics are training contents, ability of trainers, training design, training climate. The last Subordinate variables of organizational transfer climate are support of supervisors, support of peer, support of organization. Conclusion: As a analysis result, trainee characteristics appeared to be in effect only significant influence near far transfer of training, the effect of the far transfer of training, there is no significant. In addition, the training characteristics appeared to be having a significant influence on near and far transfer effects. Organizational transfer climate appeared to be having a significant influence on near and far transfer effects. Finally, near transfer effect appeared to be having a significant influence on far transfer effects. Application: Results of this analysis in the study to training organization and training characteristics of the transition environment effects on nuclear power institutions and operators training organization having a significant impact that says. The transfer of knowledge and technology, as well as that can be applied to a new situation in terms of education and training are important characteristics.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.285-296
• /
• 2011

UN, OECD, ITU and other international organizations regularly announce ISI (Information Society Index) to utilize in establishing and evaluating information policies. ISI is utilized as important data for countries to evaluate their information policy performance and select future projects. As the advancement of information systems, the importance of information security has been emerged. Accordingly, NISI (National Information Security Index) has been required. NISI number is the most clearly figure to express the characteristics of a particular group's information security. It can be utilized in determining information security policies. Currently, questionnaire method has been used to calculate NISI number. But there is an absolute lack of statistical data, and the reliability of surveyed statistical data is problematic. The objective of this paper is to show how to collect precise micro data of each company's information security index numbers, and to develop an OLAP database system which calculating NISI numbers by using those micro data. In this process of the survey, we presented the technique to collect the data more systematically, and to analyze the data without using questionnaire method. OLAP architecture performs only well on the facts that are summarizable along each dimension, where all hierarchy schemas are distributive. Therefore we transformed the non-distributive hierarchy schema into the distributive hierarchy schema to implement OLAP database system. It is thought that this approach will be useful one from an implementation and schema design point of view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.512-520
• /
• 2020

Recently, the applications of the standing column well (SCW) ground heat exchanger (GHX) have increased significantly in Korea as a heat transfer mechanism of ground source heat pump systems (GSHP) because of its high heat capacity and efficiency. Among the various design and operating parameters, bleeding was found to be the most important parameter for improving the thermal performance, such as ground thermal conductivity and borehole thermal resistance. In this study, a bleeding analysis model was developed using the thermal response test data, and the effects of bleeding rates and bleeding locations on the thermal performance of anSCW were investigated. The results show that, when the ground water flows into the top of anSCW, the time variation of circulating water temperature decreased with increasing bleeding rate, and the ground thermal conductivity increases by as much as 179% with a 30% bleeding rate. When the ground water flows into the bottom of the SCW, the circulating water temperatures become almost constant after the increase in the beginning time because the circulating water exchanges heat with the ground structure before mixing with the ground water at the bottom.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.688-695
• /
• 2017

Compared to metal, CFRP has excellent mechanical characteristics in terms of intensity, hardness, and heat resistance as well as its light weight that it is used widely in various fields. Therefore, this material has been used recently in the aerospace field. On the other hand, the material has shortcomings in terms of its extreme vulnerability to damage occurring internally from an external impact. This study examined the intensity up to its destruction from repeated use with the internal impact of a CFRP laminated plate that had also been exposed to external impact obtain design data for the external plate of aircraft used in the aerospace field. For the experimental method, regarding the quasi-isotopic type CFRP specimen and orthotropic CFRP specimen that are produced with a different layer structure, steel spheres with a diameter of 5 mm were collided to observe the resulting impact damage. Through a 3-point flexural fatigue experiment, the progress of internal layer separation and impact damage was observed. Measurements of the flexural fatigue strength after the flexural fatigue experiment until internal damage occurs and the surface impacted by the steel spheres revealed the quasi-isotopic layer structure to have a higher intensity for both cases.