• Applied Chemistry for Engineering
• /
• 제32권1호
• /
• pp.61-67
• /
• 2021

In this study, the adsorption decolorization process of sea buckthorn oil was carried out to verify the possibility of the sea buckthorn oil as a natural UV absorber. The optimization was carried out by using the central composite design model-response surface methodology (CCD-RSM). The response values of CCD-RSM were selected as the decolorization effect through the process, acid value after decolorization, and UV absorbance of the decolored oil at 290nm. The amount of adsorbent, temperature and time were selected as the process variables for the experiments. According to the results of CCD-RSM, the results of optimization were all consistent. The optimal conditions, which satisfy CCD-RSM statically and mathematically, were 4.32 wt.%, 134.90 ℃, and 19.8 min for the amount of adsorbent, temperature and time, respectively. The estimated response values expected under these optimal conditions values were 94.78%, 2.08 mg/g KOH, and 2.91 for the decolorization effect, acid value and UV absorbance at 290 nm, respectively. Also the average error from actual experiment for verifying the conclusions was smaller than 2%. Therefore, it was confirmed that the application of CCD-RSM to the adsorption decolorization process of sea buckthorn oil showed a very high level of acceptable results and that the sea buckthorn oil has high possibility to be used as a natural UV absorber.

• The Journal of the Korea Contents Association
• /
• 제21권5호
• /
• pp.295-309
• /
• 2021

Maker education has recently been actively practiced under strong governmental support as a nation-wide policy for innovative education, which now had to confront the unexpected challenge and crisis of 'contactless educational environments' due to COVID-19 pandemic. In this context, this study aimed to develop a checklist needed for developing 'contactless maker education program' which still continues to maintain 'maker mindsets' as the goal and direction of maker education, since maker education has been regarded as an alternative educational environment suitable for the 4th industrial revolution age. For this purpose, this study first conducted literature review related to maker education and contactless (i.e. online) education environments, from which several characteristics of the contactless maker education have been extracted. And then, 5 maker education instructors currently conducting the contactless maker education programs in various settings provided feedback on the developed checklist draft, which actually became the final version of the checklist. Considering the current COVID-19 pandemic situation, the checklist for the contactless Maker education might be helpful in preventing to diminish or reduce the educational values and active application of maker education.

• Journal of the Korea Society of Computer and Information
• /
• 제27권3호
• /
• pp.53-61
• /
• 2022

Recent years have drawn a great attention to generation MZ and Metaverse, due to 4th industrial revolution and the development of digital environment that blurs the boundary between reality and virtual reality. Generation MZ approaches the information very differently from the existing generations and uses distinguished communication methods. In terms of learning, they have different motivations, types, skills and build relationships differently. Meanwhile, Metaverse is drawing a great attention as a teaching method that fits traits of gen MZ. Thus, the current research aimed to investigate how to increase the use of Metaverse in Educational Technology. Specifically, this research examined the antecedents of popularity of Gather Town, a platform of Metaverse. Big data of news articles have been collected and analyzed using the Bigkinds system provided by Korea Press Foundation. The analysis revealed, first, a rapid increasing trend of media exposure of Gather Town since July 2021. This suggests a greater utilization of Gather Town in the field of education after the COVID-19 pandemic. Second, Word Association Analysis and Word Cloud Analysis showed high weights on education related words such as 'remote', 'university', and 'freshman', while words like 'Metaverse', 'Metaverse platform', 'Covid19', and 'Avatar' were also emphasized. Third, Network Analysis extracted 'COVID19', 'Avatar', 'University student', 'career', 'YouTube' as keywords. The findings also suggest potential value of Gather Town as an educational tool under COVID19 pandemic. Therefore, this research will contribute to the application and utilization of Gather Town in the field of education.

• Journal of the Society of Disaster Information
• /
• 제18권2호
• /
• pp.374-385
• /
• 2022

Purpose: Even if a damage is applied to the dust of the construction site containing the first-class carcinogen, it is dismissed or 5~30% of the amount of noise damage compensation is paid., Because of such loopholes, some construction companies are neglecting the dust management of the construction site, and the damage of the workers and the residents in the construction site continues. Method: The purpose of this study is to examine the problems of the calculation criteria of damage compensation amount of construction site dust, the measurement of dust concentration, the analysis of measurement data (the data of electric signboard measuring device by the mining scattering method), the prediction and evaluation methods such as modeling, and to suggest improvement measures. Result: It is found that it is impossible to calculate the amount of damages from dust damage in the construction site by calculating the current dust damage compensation amount and dust concentration modeling and measurement. Conclusion: It will receive an application for compensation for damage within the site where damage is expected (about 100m in the straight line and the boundary line of the site), and present a method of calculating the amount of compensation that differentially evaluates dust damage to the degree of dust management and compliance with dust-related legal standards.

• Applied Chemistry for Engineering
• /
• 제33권6호
• /
• pp.630-635
• /
• 2022

Copper(II) oxide (CuO), electroless plated on a nitrogen-containing carbon sponge prepared by a melamine sponge thermal treatment, was developed as a nitric oxide (NO) gas sensor that operates without a wafer. The CuO content on the surface of the carbon sponge increased as the plating time increased, but the content of nitrogen known to induce NO gas adsorption decreased. The untreated carbon sponge showed a maximum resistance change (5.0%) at 18 min. On the other hand, the CuO plated sample (CuO30s-CS) showed a maximum resistance change of 18.3% in 8 min. It is considered that the improvement of the NO gas sensing capability was caused by the increase in hole carriers of the carbon sponge and improved movement of electrons due to CuO. However, the NO gas detection resistance of the CuO electroless plated carbon sponge for 60 s decreased to 1.9%. It is considered that the surface of the carbon sponge was completely plated with CuO, resulting in a decrease in the NO gas adsorption capacity and resistance change. Thus, CuO-plated carbon sponge can be used as an effective NO gas sensor because it has fast and excellent resistance change properties, but CuO should not be completely plated on the surface of the carbon sponge.

• Applied Chemistry for Engineering
• /
• 제33권3호
• /
• pp.302-308
• /
• 2022

The PdO nanoparticle with large surface area was selected to solve the environmental pollution problem at fire range caused by high energy explosives research department explosive (RDX) and high melting explosive (HMX). By simulating water pollution, RDX and HMX nitramine explosives were dissolved in water, followed by the degradation reaction at 313 K by adding PdO. In order to measure the degradation reaction rate of explosives, ¹H NMR was used, which can monitor the reaction rate without losing sample during reaction, and observe the progress of the reaction through the spectrum. The results showed that the degradation of RDX and HMX by PdO nanoparticles are pseudo-first order reaction. The degradation of explosives compounds were observed via the chemical shift and peak intensity analysis of NMR peaks. The measured rate constants for these reactions of RDX and HMX were 2.10 × 10^-2 and 6.35 × 10^-4 h^-1, respectively. This study showed that the application of PdO nanoparticles for explosives degradation is a feasible option.

• Applied Chemistry for Engineering
• /
• 제33권3호
• /
• pp.235-241
• /
• 2022

According to the World Water Development Report 2015 released by the United Nations, drinking water is expected to decrease by 40% by 2030. This does not mean that the amount of water decreases, but rather that the water source is contaminated due to environmental pollution. Because microbes are deeply related to water quality, the analysis of microbe is very important for water quality management. While the most common method currently used for microbial analysis is microscopic examination of the shape and feature after cell culture, as the gene analysis technology advances, quantitative polymerase chain reaction (qPCR) can be applied to the microscopic microbiological analysis, and the application method has been studied. Among them, a reverse transcription (RT) step enables the analysis of RNA by RT-PCR. Integrated cell culture (ICC)-qPCR shortens the test time by using it with microbial culture analysis, and viability qPCR can reduce the false positive errors of samples collected from natural water source. Multiplex qPCR for improved throughput, and microfluidic qPCR for analysis with limited amount of sample has been developed In this paper, we introduce the case, principle and development direction of the qPCR method applied to the analysis of microorganisms.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제32권1호
• /
• pp.41-52
• /
• 2022

Objectives: This study intends to review the impact on cleaning workers and suggest directions for improvement by reviewing the legal and institutional ways in which Article 86 Nos. 7 and 16 of the Enforcement Decree of the Occupational Safety and Health Act work on the maintenance and promotion of cleaning workers' health. Methods: The following laws and systems were reviewed and considered: First, the occupational safety and health legislation obligated or required to be applied to protect the health of cleaning workers; Second, the status of control of chemicals or mixtures used at cleaning sites through the Consumer Chemicals Product and Biocide Safety Control Act; Third, Control of consumer products according to foreign material safety data sheet related laws. Results: Legal and institutional measures necessary to protect the health of cleaning workers include the legal control of harmful substances to be controlled, work environment monitoring, and special health examinations. The application of the Consumer Chemicals Product and Biocide Safety Control Act does not satisfy the legal and practical level of health maintenance and promotion required by the Occupational Safety and Health Act, and the communication of chemical information is insufficient. Overseas, there are restrictions on the use of consumer products in the workplace without material safety data sheets. Conclusions: It is necessary to improve the system to ensure the health of workers handling consumer chemical products. The remaining laws and regulations exempted from the obligation to prepare material safety data sheets should be additionally reviewed.

• Journal of Christian Education in Korea
• /
• 제71권
• /
• pp.241-276
• /
• 2022

Due to the 4th industrial revolution, which started with the Smart Revolution in the early 21st century, Hyper-Connectivity, Hyper-Convergence and Hyper-Intelligence of our society is accelerating. These changes induced formation of Metaverse as a fused new space that crosses the perimeter of the physical space and virtual(digital) spaces beyond time and place. The characteristics of Metaverse are continuously spread by engaging with the characteristics of the MZ generation, which collects both Millennial generation (M Generation) and Z Generation. With outburst of Covid-19 pandemic, a variety of attempts have been made to utilize Metaverse, even in church education when it was impossible to worship directly. In other words, the usefulness of the Metaverse was confirmed as a new community space of the education of the church. In addition, Metaverse may provide a substantial, experiential and evolving space for church education. However, in order for church education to further develop, the development in the method of education is also required to move beyond mere concept of space. In particular, when the learner-centered education method, one of the common characteristics of the Metaverse and MZ generation, it is thought that the church education in the Metaverse era will be able to go in a more evolving direction.

• Industry Promotion Research
• /
• 제6권2호
• /
• pp.55-62
• /
• 2021

The number of single-parent families in South Korea increased since 2000, related to a sharp rise in the divorce rate of 50s and an increase in male mortality rates among those aged 40s-50s. Middle-aged single mothers experience a critical period realizing self-actualization needs, while being in the middle adulthood from the lifespan developmental perspective. In this respect, it is significant to study self-actualization of middle-aged single mothers through guided imagery and music (GIM) in order to provide them with psychological support. This study was conducted from September 2018 to June 2020, and the GIM sessions were conducted at least 10 times. Four participants were selected among the middle-aged single mothers. The imagery experiences of participants in the GIM sessions were classified into four sub-elements: physicalness, emotion, memory, and sense. Within those sub-elements, eight semantic units were categorized into 46 elements. Finally, 152 semantic units were derived. Moreover, the self-actualization which participants experienced through GIM presented three archetypal images: shadow, persona, and the self. In the GIM sessions, experiences of putting their negative emotions associated with family into words and changing passive self-imagery into active one enabled participants to bring the shadow into their consciousness, there by recognizing their positive and bright internal self. Furthermore, participants could map that their current status as people marginalized by siblings and parents, enraged and holding double standards for others, was suppressed by their 'good daughter' and 'religious' personas. This realization lead them to realize and restore their persona. The use of GIM in the study allowed participants to elicit re-experiences of the negative events, while experiencing various imagery and music. This process helped participants achieve self-actualization.