• 제목/요약/키워드: Induced demand effect

검색결과 70건 처리시간 0.021초

우리나라 의원에서의 공급자 유인수요 실증분석: 유인수요 효과와 가용성 효과의 구분 (Empirical Analysis of Supplier Induced Demand in Korea: Distinction between Induced Demand Effect and Availability Effect)

  • 여지영;정형선
    • 보건행정학회지
    • /
    • 제25권1호
    • /
    • pp.53-62
    • /
    • 2015
  • Background: Supplier induced demand (SID) indicates the case when doctors increase the demand of the patients, following their (physicians') own best interests rather than patients'. This may occur when asymmetry of information exists between suppliers and consumers. This study aims to confirm whether SID exists in the Korean setting, particularly by dividing SID into both 'induced demand effect' and 'availability effect.' Methods: Induced demand effect and availability effect are differentiated following Carlsen & Grytten's theoretical frame which divides doctor density regions into high and low ones. Results: Positive correlation between doctors' density and utilization of their services was found, which could be interpreted as 'availability effect.' Conclusion: The result suggests that additional medical use for additional doctor, particularly in the area of low doctor density, can be interpreted to occur to meet the basic medical need of the people rather than as a result of unnecessary induced demand. It is important to make more medical doctors provided and to distribute them appropriately across the region in such a country like Korea where doctor's density is relatively low.

산업연관표 2009를 이용한 태양광발전설비산업의 생산유발효과분석 (Induced Production Analysis for Photovoltaic Power Generation Equipment in Korea using Input-Output Table 2009)

  • 김윤경
    • 신재생에너지
    • /
    • 제8권1호
    • /
    • pp.8-17
    • /
    • 2012
  • The Korean government pushed ahead various policies to disseminate photovoltaic (PV), wind power, small hydro, bio-fuel, etc. Renewable energy system (RES) budget of the Korean government increased from 118 billion won of 2003 to 876.6 billion won of 2010. The R&D budgetary supports for RES increased by 6.8 times in the period 2003-2010. It is necessary to confirm RES budget expenditure that renewable energy promotion policy makes good performance evaluated in quantity level. This paper made Input-Output Table 2009 contains photovoltaic power generation equipment industry as a dependent sector and analyzed induced production effect by demand of photovoltaic power generation equipment industry. From the empirical analysis result, additional demand in photovoltaic power generation equipment induced 1.932 times of induced production in Korea. Each of industry sector has positive induced production from the additional demand in photovoltaic power generation equipment. Renewable energy promotion in photovoltaic power generation is considered together with industry policy as the option to sustain economic growth.

Serviceability-oriented analytical design of isolated liquid damper for the wind-induced vibration control of high-rise buildings

  • Zhipeng Zhao;Xiuyan Hu;Cong Liao;Na Hong;Yuanchen Tang
    • Smart Structures and Systems
    • /
    • 제33권1호
    • /
    • pp.27-39
    • /
    • 2024
  • The effectiveness of conventional tuned liquid dampers (TLDs) in controlling the wind-induced response of tall flexible structures has been indicated. However, the impaired control effect in the detuning condition or a considerably high mass cost of liquid may be incurred in ensuring the high-level serviceability. To provide an efficient TLD-based solution for wind-induced vibration control, this study proposes a serviceability-oriented optimal design method for isolated TLDs (ILDs) and derives analytical design formulae. The ILD is implemented by mounting the TLD on the linear isolators. Stochastic response analysis is performed for the ILD-equipped structure subjected to stochastic wind and white noise, and the results are considered to derive the closed-form responses. Correspondingly, an extensive parametric analysis is conducted to clarify a serviceability-oriented optimal design framework by incorporating the comfort demand. The obtained results show that the high-level serviceability demand can be satisfied by the ILD based on the proposed optimal design framework. Analytical design formulae can be preliminarily adopted to ensure the target serviceability demand while enhancing the structural displacement performance to increase the safety level. Compared with conventional TLD systems, the ILD exhibits higher effectiveness and a larger frequency bandwidth for wind-induced vibration control at a small mass ratio.

의료급여비용 증가에 공급자 유인효과가 미치는 영향 (The Impact of Supplier Induced Demand on Increase in Medical Aid Expenditure)

  • 신현웅;윤장호;노연홍;여지영
    • 보건행정학회지
    • /
    • 제24권1호
    • /
    • pp.13-23
    • /
    • 2014
  • Background: A need arises to efficiently control health expenditure for medical aid due to a sharp increase in medical aid expenditure. This study experimently analyzes the impact of physician behavior on medical use for medical aid beneficiaries using supplier induced demand (SID) theory. Methods: This study looks into analyze SID effect using expenditure factor analysis of medical aid for the years between 2003 and 2010 in comparison with health insurance. Moreover, this study analyzes the existence and scale of SID using econometrics modeling with panel data on 16 cities and provinces's health expenditure data for medical aid from 2003 1/4 to 2010 4/4. Results: This study finds that the growth rate of visit days per capita and treatment amount per visit days for medical aid is higher than health insurance. Furthermore, the result of econometrics modeling analysis shows the existence of SID in general hospital, hospital, clinic, oriental clinic. Conclusion: In order to efficiently control expenditure for medical aid, it is required to reinforce macro polices such as the introduction of 'target management' and micro policies such as the strengthen of management on medical institutes in the perspective of suppliers as well as regulations of demanders.

Exploring the Effect of Mental Demand in Web Searches: A Pilot Study

  • 나경식
    • 한국문헌정보학회지
    • /
    • 제48권2호
    • /
    • pp.379-398
    • /
    • 2014
  • This pilot study explored the effect of mental demand on a Web searcher's thoughts, emotions, efforts, and performance in Web searches in order to address whether or not there is any difference between searchers exposed to mental demand manipulation and searchers not exposed. Research data were collected via think-aloud protocol (TAP) with a dual-task in experiments and interviews with 10 subjects who participated in this study. For the searcher's thoughts, relevance judgment was found to be hindered by mental demand. For the searcher's emotions, the experimental group was more frustrated than the control group. With respect to the searcher's efforts, searchers for the experimental group with mental demand manipulation were more likely to spend more time, make fewer queries, and visit fewer pages but work harder to find more relevant information that they needed. Lastly, with regard to the searcher's performance, it is likely that performance was highly dependent upon the completion of the search tasks for both groups. The NASA-TLX six components and cognitive load scores of searchers did not make a significant difference in the outcome. The findings support the use of a dual-task methodology as a promising approach for the assessment of cognitive load induced by complex Web searches.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

Focused Electron Beam-Controlled Graphene Field-Effect Transistor

  • Kim, Songkil
    • 한국전기전자재료학회논문지
    • /
    • 제33권5호
    • /
    • pp.360-366
    • /
    • 2020
  • Focused electron beams with high energy acceleration are versatile probes. Focused electron beams can be used for high-resolution imaging and multi-mode nanofabrication, in combination with, molecular precursor delivery, in an electron microscopy environment. A high degree of control with atomic-to-microscale resolution, a focused electron beam allows for precise engineering of a graphene-based field-effect transistor (FET). In this study, the effect of electron irradiation on a graphene FET was systematically investigated. A separate evaluation of the electron beam induced transport properties at the graphene channel and the graphene-metal contacts was conducted. This provided on-demand strategies for tuning transfer characteristics of graphene FETs by focused electron beam irradiation.

주택수요와 주택구매력 차이의 결정요인에 대한 연구 (A Study on the Factors of the Gap between Housing Demand and House Affordability)

  • 김종희
    • 아태비즈니스연구
    • /
    • 제15권1호
    • /
    • pp.239-256
    • /
    • 2024
  • Purpose - The purpose of this study was to examine the main determinants of the gap between housing demand and house affordability. Design/methodology/approach - This study used the micro-level data of 60,043 households from Korea Housing-Finance Corporation by covering the period 2011 to 2022. Findings - First, the trend of general housing demand showed a higher figure in the future demand than in current demand. And such a tendency showed in all types of households, a relative young, low income, and single households. In the case of current housing demand, it has increased by 2022 from the beginning of 2013, while the future demand has rapidly increased from 2020. Second, although the house affordability showed a higher figure in current housing demand by 2019, its trend changed to be higher in future housing demand from 2020 by a rapid decreasing affordbility in current demand. In the case of young householders, the current house affordability was higher than that of future. The figure of low income householders was below 1 point in both periods, and house affordability of single householders showed a similar level in both periods. which showed over 1 point. Third, financial regulation on housing markets induced th widening of the gap between housing demand and house affordability, and such a trend is much atronger in the future(potential) gap of demand and affordability. More specifically, the strengthen financial regulation leaded to the widening of the gap in all types of households, a relative young, low income, and single households. Research implications or Originality - The effect of financial regulation is necessary to consider under the features of each households.

수출이 수입유발에 미치는 효과에 관한 연구 (A Study on the Effect of Export on Induction of Import)

  • 손용정
    • 통상정보연구
    • /
    • 제9권4호
    • /
    • pp.127-139
    • /
    • 2007
  • There are three methods to examine import structures : 1) look at import coefficient, 2) import dependency, and 3) composition ratio of imported products. Therefore, this study analyses the import structure of Korea using the three methods above and when final demand occurs on produced goods and services in each industrial section, it divides import induction coefficients that indicate size of induced import directly and indirectly into consumption, investment and export to identify the effect of export on import induction.

  • PDF

Numerical investigation of on-demand fluidic winglet aerodynamic performance and turbulent characterization of a low aspect ratio wing

  • A. Mondal;S. Chatterjee;A. McDonald Tariang;L. Prince Raj;K. Debnath
    • Advances in aircraft and spacecraft science
    • /
    • 제10권2호
    • /
    • pp.107-125
    • /
    • 2023
  • Drag reduction is significant research in aircraft design due to its effect on the cost of operation and carbon footprint reduction. Aircraft currently use conventional solid winglets to reduce the induced drag, adding extra structural weight. Fluidic on-demand winglets can effectively reduce drag for low-speed flight regimes without adding any extra weight. These utilize the spanwise airflow from the wingtips using hydraulic actuators to create jets that negate tip vortices. This study develops a computational model to investigate fluidic on-demand winglets. The well-validated computational model is applied to investigate the effect of injection velocity and angle on the aerodynamic coefficients of a rectangular wing. Further, the turbulence parameters such as turbulent kinetic energy (TKE) and turbulent dissipation rate are studied in detail at various velocity injections and at an angle of 30°. The results show that the increase in injection velocity shifted the vortex core away from the wing tip and the increase in injection angle shifted the vortex core in the vertical direction. Further, it was found that a 30° injection is efficient among all injection velocities and highly efficient at a velocity ratio of 3. This technology can be adopted in any aircraft, effectively working at various angles of attack. The culmination of this study is that the implementation of fluidic winglets leads to a significant reduction in drag at low speeds for low aspect ratio wings.