• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.3
• /
• pp.151-156
• /
• 2019

According to recent advances in technology, major robot technologies that have been developed and commercialized for industrial use are being applied to various fields in our everyday life such as guide robots and cleaning robots. Among them, the navigation based on the self localization has become an essential element technology of the robot. In the case of indoor environment, many high-priced sensors are used, which makes it difficult to activate the robot industry. In this paper, we propose a robotic platform and a moving algorithm that can travel by using Dijkstra algorithm. The proposed system can find a short route to the destination with its own position. Also, its performance is discussed through the experimentation of an actual robot.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4541-4554
• /
• 2019

This paper proposes a planar projection DV-hop location algorithm (PTCDV-hop) based on the LED semi-angle at half power (SAHP, which accounts for LED SAHP characteristics in visible light communication (VLC)) and uses the DV-hop algorithm for range-free localization. Distances between source nodes and nodes positioned in three-dimensional indoor space are projected onto a two-dimensional plane to reduce complexity. Circles are structured by assigning source nodes (projected onto the horizontal plane of the assigned nodes) to be centers and the projection distances as radii. The proposed PTCDV-hop algorithm then determines the position of node location coordinates using the trilateral-weighted-centroid algorithm. Simulation results show localization errors of the proposed algorithm are on the order of magnitude of a millimeter when three sources are used. The PTCDV-hop algorithm has higher positioning accuracy and stronger dominance than the traditional DV-hop algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.173-182
• /
• 2012

A recent advance in smart phones is increasing utilization of location information. Existing positioning system was using GPS location for positioning. However, the GPS cannot be used indoors, if GPS location has an incorrectly problem. In order to solve indoor positioning problems of indoor location-based positioning techniques have been investigated. There are a variety of techniques based on indoor positioning techniques like as RFID, UWB, WLAN, etc. But WLAN location positioning techniques take advantage the bond in real life. WLAN indoor positioning techniques have a two kind of method that is centroid and fingerprint method. Among them, the fingerprint technique is commonly used because of the high accuracy. In order to use fingerprinting techniques make a WLAN signal map building that is need to lot of resource. In this paper, we try to solve this problem in an Indoor environment for WLAN-based fingerprint of a virtual building technique, which is proposed. Proposed technique is classified Cell environment in existed Indoor environment, all of fingerprint points are shown virtual grid map in each Cell. Its method can make fingerprint grid map very quickly using estimate virtual signal value. Also built signal value can take different value depending of the real estimate value. To solve this problem using a calibration technique for the Splite-tree is proposed. Through calibration technique that improves the accuracy for short period of time. It also is improved overall accuracy using predicted value of around position in cell.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.259-264
• /
• 2014

This paper is research paper on the MPD(Magnet Position Device) for the outdoor MGV(Magnet /Magnet Gyro Guidance Vehicle). Usually, MGV is used in indoor environment because of a measurement height of the magnet position device. CMPD(Commercial magnet position device) has 30 mm measurement height, so this is suitable structure in indoor environment like to a flat surface. Outdoor environment is an uneven and irregular, So Outdoor MGV must has a suspension. But CMPD is unsuitable for outdoor environment because of a collision with a surface caused by suspension. Thus, measurement height of the outdoor MPD is positively necessary more than 100 mm. So, we suggest the outdoor MPD using analog magnet hall sensor, moving average filter and Characteristic(rate of the magnet hall sensor) function of the localization. Result of the experiments, the proposed Magnet Position Device for the outdoor MGV has localization accuracy 4.31 mm, measurement height 150 mm and width 150 mm and is efficient more than CMPD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4131-4138
• /
• 2012

In this paper, we propose a Pedestrian Position Information System(PPIS) using low-cost inertial sensors in GPS-disabled area. The proposed scheme estimates the attitude/heading angle and step detection of pedestrian. Additionally, the estimation error due to the inertial sensors is mitigated by using additional sensors. We implement a portable hardware module to evaluate performance of the proposed system. Through the experiments in indoor building, the estimation error of position information was measured as 2.4% approximately.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.31-36
• /
• 2014

A study on the indoor positioning system has been active recently for the location based service indoors. In the 3 dimensional positioning system based on the acoustic signal and TDOA technology, the error characteristics of the estimated source position would be changed depending on the number of microphones and the pattern of the microphone array. In this paper, the estimated position error according to the measured distance error between the microphones and the signal source is analyzed, and the optimum microphone array is decided considering the estimated position error patterns and the total amount of the estimated position error.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.135-140
• /
• 2005

Installation of ceiling type unit is achieved by one of efforts for agreeable classroom environment embodiment along with economic growth. But research about changing the position of ceiling type unit is lacking in present. Therefore, this thesis is to study the thermal environment of 5 different position cases of ceiling type, namely Case A, B, C, D, E. Here, Case C is the case that has the position of ceiling type center of the classroom and the other 4 alternatives are 0.7 m away from the Case C according to x and z axis. In this thesis temperature distributions, air current distribution, heat amenities such as PMV of occupants are analyzed as the environmental factors. Through these factors, Case C and Case D are the better position alternatives than the alternatives of Case A, Case B and Case E because the latter cases the air current reaches directly to indoor occupants so that occupants feel chilly. This thesis has a conclusion under the condition of only one inlet air temperature and seat arrangement. But afterwards more inlet air condition and seat arrangement must be considered.

• Journal of Sensor Science and Technology
• /
• v.33 no.4
• /
• pp.196-202
• /
• 2024

Path-planning, a critical component of mobile robot navigation, comprises both local and global planning. Previous studies primarily focused on enhancing the individual performance of these planners, avoiding obstacles, and computing an optimal global path from a starting position to a target position. In this study, we introduce a practical path-planning framework that employs a target planner to bridge the local and global planners; this enables mobile robots to navigate seamlessly and efficiently toward a global target position. The proposed target planner assesses the visibility of waypoints along the global path, and it selects a reachable navigation target, which can then be used to generate efficient control commands for the local planners. A visibility-based target planner can handle situations, wherein the current, target waypoint is occupied by unknown obstacles. Real-world experiments demonstrated that the proposed pathplanning framework with the visibility-based target planner allowed the robot to navigate to the final target position along a more efficient path than the framework without a target planner.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.494-502
• /
• 2007

Ubiquitous location based services (u-LBS) will be interested to an important services. They can easily recognize object position at anytime, anywhere. At present, many researchers are making a study of the position recognition and tracking. This paper consists of postion recognition and user identification system. The position recognition is based on location under services (LBS) using a signal strength map, a database is previously made use of empirical measured received signal strength indicator (RSSI). The user identification system automatically controls instruments which is located in home. Moreover users are able to measures body signal freely. We implemented the multi-hop routing method using the Star-Mesh networks. Also, we use the sensor devices which are satisfied with the IEEE 802.15.4 specification. The used devices are the Nano-24 modules in Octacomm Co. Ltd. A RSSI is very important factor in position recognition analysis. It makes use of the way that decides position recognition and user identification in narrow indoor space. In experiments, we can analyze properties of the RSSI, draw the parameter about position recognition. The experimental result is that RSSI value is attenuated according to increasing distances. It also derives property of the radio frequency (RF) signal. Moreover, we express the monitoring program using the Microsoft C#. Finally, the proposed methods are expected to protect a sudden death and an accident in home.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.63-69
• /
• 2020

In this paper, we propose an indoor positioning technique using the landmark based on relative Access Point (AP) signal strengths. The absolute values of AP signals are used to conventional indoor positioning technologies, but they may be different because of the difference of the measuring device, the measuring environment, and the timing of the measurements. However, we found the fact that the flow of the AP's RSSI in certain places shows almost constant patterns. Based on theses characteristics, we identify the relative strength between the APs and store the certain places as landmarks where they show certain patterns. Once the deployment of the landmark map is complete, system calculate position of user using the IMU sensor of smartphone and calibrate it with stored landmarks. Our system shows 75.2% improvement over technology that used only sensors, and 39.6% improvement over technology that used landmarks that were selected with absolute values.