• KIEAE Journal
• /
• v.2 no.3
• /
• pp.39-45
• /
• 2002

Double facades are built to allow natural ventilation in high rise buildings and buildings with high outside noise level. In high rise Buildings the gains in summer can be reduced by sufficient sun protection devices placed outside the rooms in the ventilated space between the inner and outer facade. To evaluate the energetic performance, three buildings with double facade were monitored for at least one year (Siemens Building in Dortmund/Germany, Victoria Insurance Company in Duesseldorf/Germany and RWE Tower in Essen/Germany). The results document the indoor climate, the boundary conditions for further planning and the possibilities for high rise buildings without or with little cooling facilities.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.149-155
• /
• 2020

In this study, we employed Manchester code for illumination control and flicker prevention of the light-emitting diode (LED) used in a visible light communication (VLC) system. In the VLC transmitter, the duty factor of the Manchester code was utilized for illumination control; in the VLC receiver, the spike signal from an RC-high pass filter was utilized to recover the transmitted signal whilst suppressing the 120-Hz noise arising from adjacent lighting lamps. Instead of the clock being transmitted in a separate channel, a syncmark signal was transmitted in front of each data byte and used as the reference time for transforming the Manchester code to non-return-to-zero (NRZ) data in the receiver. In experiments, the LED illumination was controlled in the range of approximately 12-84% of the constant wave (CW) light via changing of the duty factor from 10% to 90%. This scheme is useful for constructing indoor wireless sensor networks using LED light that is flicker-free and presents capability for illumination control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1821-1827
• /
• 2007

In this paper, an analytic transfer channel modeling function by impulse signal propagation effects in indoor power-line network are analysed. The modeled channel parameters of power line channel including background noise is applied to the OFDM system and we analysis BER for QPSK and 16-QAM modulation signals with simulation. By the representation of gain for OFDM modulation, we can estimate the characteristic parameters of OFDM in Broadband power line communication.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.801-806
• /
• 2006

Balcony space effects indoor thermal environment. When balcony is extended, problems would be made such as noise, dew condensation, over heating energy, and etc. Extend of balcony increase heating load about 47%. occupants must consider remodeling for their balcony. This paper compare extended balcony with unextended balcony on heating load in use of energy simulation program. According to increase heating load, we expected that building heating cost would be increased by extend balcony. To consider extend balcony, occupants must be funished with better date between healing cost increasing and floor area increasing.

• The Korean Journal of Emergency Medical Services
• /
• v.26 no.1
• /
• pp.87-99
• /
• 2022

Purpose: This study aimed to provide basic data for the improvement of the standards related to the performance improvement of the firefighting equipment standards for special ambulances. Methods: Among the domestic firefighting equipment standards, the special ambulance standard was compared with the NFPA 1917 standard for the United States automobile ambulance 2019 and European Union European standard EN 1789 medical vehicle and its equipment, a road ambulance. Results: Anti-skid performance based on indoor noise standards, performance standards for interior lights, seat belt warning device, child car seat fixing device, safety handle, auxiliary footrest, and flooring materials should be supplemented. Conclusion: It is necessary to strengthen the production and performance standards for improvement to a level corresponding to the national standards, such as the United States and European Union.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.242-253
• /
• 2006

This paper presents and analyzes field test results of E-VSB(Enhanced-VSB) system proposed by Zenith/ATl and adopted ATSC standard. In the field test, according to types of antennas we measured reception possibility, noise margin, ease of reception to analyze performance improvement of E-VSB system at each outdoor/indoor test point. Also, we verify a backward compatibility between E-VSB and conventional 8-VSB system and check selection of test point, and configuration of transmitter and test vehicle. By the field test results, E-VSB system did not only outperform over 8-VSB system at severe multipath environment such as indoor reception, but also verified backward compatibility with it.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.109-115
• /
• 2011

As fingerprinting method, k-nearest neighbor(KNN) has been widely applied for indoor location in wireless location area networks(WLAN), but its performance is sensitive to number of neighbors k and positions of reference points(RPs). So artificial neural network(ANN) clustering algorithm is applied to improve KNN, which is the KNN/ANN hybrid algorithm presented in this paper. For any pattern matching based algorithm in WLAN environment, the characteristics of signal to noise ratio(SNR) to multiple access points(APs) are utilized to establish database in the training phase, and in the estimation phase, the actual two dimensional coordinates of mobile unit(MU) are estimated based on the comparison between the new recorded SNR and fingerprints stored in database. In the proposed algorithm, through KNN, k RPs are firstly chosen as the data samples of ANN based on SNR. Then, the k RPs are classified into different clusters through ANN based on SNR. Experimental results indicate that the proposed KNN/ANN hybrid algorithm generally outperforms KNN algorithm when the locations error is less than 2m.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.391-399
• /
• 2012

This paper proposes a particle filter approach for SLAM(Simultaneous Localization and Mapping) of a mobile robot. The SLAM denotes estimation of both the robot location and map while the robot navigates in an unknown environment without map. The proposed method estimates robot location simultaneously with the locations of the ultrasonic beacons which constitute landmarks for navigation. The particle filter method represents the locations of the robot and landmarks in probabilistic manner by the distribution of particles. The method takes care of the uncertainty of the landmarks' location as well as that of the robot motion. Therefore, the locations of the landmarks are updated including uncertainty at every sampling time. Performance of the proposed method is verified through simulation and experiments. The method yields practically useful mapping information even if the range data from the landmarks include random noise. Also, it provides more accurate and robust estimation of the robot location than the usual least squares methods or dead-reckoning method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1307-1312
• /
• 2015

The recent adoption of Bluetooth LE technology in smart phones triggered commercial interest in RSSI-based positioning technology. Estimation error in RSSI measurement due to the antenna pattern, multipath fading, environmental noise has to be considered for designing beacon systems. The paper proposes an analysis method and beacon planning rules for a small and isolated indoor service area, based on probabilistic model of RSSI estimation error. As an practically important guide, the beacons have to be installed at the boundary of the service area to minimize the maximum position error, whereas the beacons have to be evenly distributed in the service space to minimize the average estimation error.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.41-46
• /
• 2010

In this paper, we propose a detection method of reduced computational complexity aimed at separating the moving objects from the background in a generic video sequence. In generally, indoor environments, it is difficult to accurately detect the object because environmental factors, such as lighting changes, shadows, reflections on the floor. First, the background image to detect an object is created. If an object exists in video, on a previously created background images for similarity comparison between the current input image and to detect objects through several operations to generate a mixture image. Mixed-use video and video inputs to detect objects. To complement the objects detected through the labeling process to remove noise components and then apply the technique of morphology complements the object area. Environment variable such as, lighting changes and shadows, to the strength of the object is detected. In this paper, we proposed that environmental factors, such as lighting changes, shadows, reflections on the floor, including the system uses mixture images. Therefore, the existing system more effectively than the object region is detected.