• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3965-3983
• /
• 2017

We propose a novel eye tracking method that can estimate 3D world coordinates using an infrared (IR) stereo camera for indoor and outdoor environments. This method first detects dark evidences such as eyes, eyebrows and mouths by fast multi-level thresholding. Among these evidences, eye pair evidences are detected by evidential reasoning and geometrical rules. For robust accuracy, two classifiers based on multiple layer perceptron (MLP) using gradient local binary patterns (GLBPs) verify whether the detected evidences are real eye pairs or not. Finally, the 3D world coordinates of detected eyes are calculated by region-based stereo matching. Compared with other eye detection methods, the proposed method can detect the eyes of people wearing sunglasses due to the use of the IR spectrum. Especially, when people are in dark environments such as driving at nighttime, driving in an indoor carpark, or passing through a tunnel, human eyes can be robustly detected because we use active IR illuminators. In the experimental results, it is shown that the proposed method can detect eye pairs with high performance in real-time under variable illumination conditions. Therefore, the proposed method can contribute to human-computer interactions (HCIs) and intelligent transportation systems (ITSs) applications such as gaze tracking, windshield head-up display and drowsiness detection.

• Journal of KIISE:Software and Applications
• /
• v.32 no.5
• /
• pp.449-460
• /
• 2005

This paper proposes a method to track persons robustly in illumination changes and partial occlusions in color video frames acquired from a fixed camera. To solve a problem of changing appearance by illumination change, a time-independent intrinsic image is used to remove noises in an frame and is adaptively updated frame-by-frame. We use a hierarchical human model including body color information in order to track persons in occlusion. The tracked human model is recorded into a persons' list for some duration after the corresponding person's exit and is recovered from the list after her reentering. The proposed method was experimented in several indoor and outdoor scenario. This demonstrated the potential effectiveness of an adaptive model-base method that corrected distorted person's color information by lighting changes, and succeeded tracking of persons which was overlapped in a frame.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1870-1878
• /
• 2021

Objective: The objective of this experiment was to investigate the effects of different colors produced by light emitting diode (LED) on Brown Tsaiya ducks. Methods: A total of 144 female Brown Tsaiya ducks were randomly allocated into three individual cage rearing chambers with different LED illumination colors as treatments. Three different treatments were: i) white color, ii) blue color, and iii) red color. The experiment periods were from ducks 21 to 49 weeks of age, determined traits included i) egg laying performance, ii) feed intake, iii) egg shell breaking strength, iv) egg shell thickness, v) egg Haugh unit, vi) egg weight, vii) serum Estradiol and Progesterone concentration, and viii) behavior pattern. Results: The results indicated that when compared with white and blue color, red color could stimulate ducks sexual maturation and raised the egg laying performance. The red light group was also observed to have the highest feed intake among three treatments. The blue treatment had the lowest egg shell breaking strength and the highest egg weight among three treatments, nevertheless, no significant difference was observed among three treatments on egg shell thickness and egg Haugh unit. The red light group had higher serum estradiol concentration than the white and blue groups, but no significant difference among treatments on the serum Progesterone concentration was found. The results of behavior pattern indicated that red light group showed more feeding and less resting behavior compared to the blue light group. Conclusion: We found a potential of applying red light illumination in the indoor laying duck raising system with positive results on egg laying performance and acceptable egg weight, equivalent egg qualities compared to white and blue light.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.35-43
• /
• 2017

In this paper, we propose indoor IoT monitoring system based on visible light communication using smart phone with attracting attentions in recent wireless communication. The main features and contributions of the proposed system developed in this paper are as follows. First, the actual data generated within indoor can be processed via the server by using only the visible light communication. Second, the collected data by using the visible light communication can be monitered by smart phone. Performance evaluation of the proposed system is performed under illumination of the normal fluorescent lamps. We first check successful transmission between transmitting module and receiving module of the data collection system. The monitoring system is tested according to the change of the degree of condensing and distance of the LED and the decoding success rate of the proposed smart phone application. We expect that the proposed system can be applied for indoor and outdoor IoT areas together.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.23-34
• /
• 2019

The façade, a fundamental function as a skin that protects human life from external environment such as cold and hot weather, snow, rain, and wind, etc, has served as a media for communication between indoor space of the building and outside space. From the media for communication point of view, the approach to envelope design, in which environmental elements are transmitted internally through the filtering of external environments, has been evolving in various ways from the past to the present. Today, modern architecture technologies including curtain wall systems and user-friendly computer programming and environmental analysis programs demonstrate a differentiated approach to envelope design related to the indoor environment. For this reason, it is worth noting that the envelope design factors and trends that appear variously in the UNStudio's projects before and after the 2000s. The factors reflected in the envelop design in conjunction with the indoor environment obtained through the case study of the UNStudio's office projects were daylight environment, thermal environment, ventilation, noise, privacy and view, and consideration for daylight environment and thermal environment was reflected in many cases through the case study. Looking at the changes in the diagrams in order of year, it can be seen that the envelope design using the environmental analysis tool has been performed since 2006. This is a clue to show the envelop design changes from the conceptual method to the data-based one. The diagrams and analysis results related to the envelop design showed that the thermal environment related to solar radiation was the most, and no diagrams and analysis related to the indoor illumination were found. Since 2010, PV panel installation has been shown in the envelope design, which can be found in the increased efficiency of PV panels due to the technological advances and the decrease in production cost.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.113-124
• /
• 2009

This study has attempted to calculate the intensity of illumination for the optimal growth environment of indoor plants after analyzing both damage to plant species and growth conditions as impacted by light conditions for the Kyobo Life Insurance greenhouse. The optical intensity of illumination has been estimated after investigating the problems of growth conditions based on an analysis of illumination by light condition, dead tree replacement cycle(weeks) and rate of damage of plant species. According to the investigation of illumination, the lowest difference was observed between the shaded spot in the south(531lux) and the sunny spot(602lux) while the largest difference(nearly 500lux) was detected between the shaded spot in the central area(210lux) and the sunny spot(782lux). According to an analysis of dead trees from 1990 to 2004, in terms of dead tree replacement cycle, Viburnum awabuki was the highest(161weeks), followed by Phyllostachys spp.(84weeks), Camellia japonica and Ternstroemia japonica(40weeks). Regardless of plant species, damage rate of plant were lower in the shaded spot and higher in the sunny spot. According to correlation and regression analyses with the intensity of illumination as an independent variable and the damage rate of plant species as a dependent variable, the damage rate of plant species increased as the intensity of illumination decreased. A dramatic decline in the rate of damage was observed at $500{\sim}600lux$. At 700lux, it reached the lowest level.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.11
• /
• pp.751-758
• /
• 2012

Recently, people are paying attention to new forms of construction. For example, deviated from an enclosed type space, people have been interested in an atrium type and an arcade type spaces. In this study, we had hypothesis 'Indoor thermal environment will be influenced by the inflow rate of natural lights with temperature and humidity.' We selected a multi-complex cultural center and conducted this study. This place is consisted of atrium, arcade, and enclosed types. The three spaces were classified according to the type of spaces that have own features along with their forms. The atrium type space has ceiling and the side windows, and the arcade type space has ceiling windows. On the other hand, there are no windows or open parts in the enclosed type space. Three measurement points at each space were selected because of their huge space. Intensity of illumination, temperature and humidity were confirmed by the average value of three measurement points. In addition, surveys were conducted regarding indoor comfort elements in each space.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.136-141
• /
• 2011

The lightshelf system reduces intense illumination levels of indoor from direct sun light and reflect to lead diffused light into indoor deeply. This study aims to design acurved-lightshelf by a ray tracing method and evaluate the daylighting performance of window integrated with the curved-lightshelf by computer simulations. For this purpose, evaluation test model was designed for the experiments to validate the simulation model, and the curved-lightshelf was designed by the ray tracing method using Ecotect. After the office model was designed using 3D simulation, the average indoor illuminance, luminance and distribution of illuminance were evaluated by simulation which has a algorithm of Radiosity and Ray-Tracing method under four different cases(case1;no lightshelf, case2; Flat board, case3; tilted at $30^{\circ}$ angle, case4; the curved-lightshelf). As results, it turns out that case1 showed higher average illuminance and case4 was more uniformly distributed than case2 and case3, In addition average luminance of case1 was also lower. indicating that the curved-lightshelf would reduce the possibility of the glare, while maintaining the sufficient daylight level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.517-525
• /
• 2006

In this paper, the algorithm which improve the efficiency of surveillance in spite of the change of light is proposed and confirmed by virtue of the experiments. One of the problems for the implementation of visual surveillance system is the image processing technique to overcome with the variations of illumination lights. Some conventional systems are generally not considered the error due to the change of lights because the system use at indoor. In practical, the factors of bad image can be classified to the ghosts due to the reflection of lights and shadows in a scene. Especially weak images and noises at night are decreased the performance of visual surveillance system. In the paper, the filter which improve the images with some change of illumination lights is designed and the gabor filter is used for recognition and tracking of the moving objects. In the results, the system showed that the recognition and tracking were obtained $92\sim100%$ of recognition rate at daytime, but $80\sim90%$ of nighttime.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.2
• /
• pp.100-105
• /
• 2017

Under natural conditions, black soldier fly, Hermetia illucens (L.) (Diptera: Stratiomyidae), colonizes in warm temperate regions, and is active in Korea from May through October. Information on black soldier fly rearing, which is affected by seasonal factors in Korea, is limited. Oviposition by black soldier flies is dependent on light intensity and wavelength. Therefore, continuous mass rearing of this fly requires determination of optimal artificial conditions of illumination. In this study, we compared the number of eggs laid under an artificial light source (750 watt HPL lamp) versus nature sunlight. Our results showed that compared to oviposition under natural sunlight, the use of one or two lamps for 7 hours, resulted in only 43 and 76%, of the total number of eggs laid under natural sunlight, respectively. We also investigated the hatchability of oviposited eggs under artificial illumination and under natural sunlight. The hatching rate under the former was much significantly lower than under the latter. Further detailed research is required to develop methods for successful mass rearing of black soldier fly throughout the year by means of an indoor system.