• Spatial Information Research
• /
• v.21 no.5
• /
• pp.73-82
• /
• 2013

In recent years, according to the increase of interests in indoor space, various researches are being carried out for the construction and services of indoor spatial information. BIM data is very useful to build indoor spatial information. Accordingly, many studies for the use of BIM data on GIS part are in progress. In order to take advantage of BIM data on GIS part, the conversion technology for building indoor data and visualization techniques are required. However, most of the previous researches are focused on the conversion technology to construct indoor spatial information by importing BIM data into GIS applications while there is few research on visualization. In this study, an indoor LOD(Level of Detail) model is proposed to apply to on indoor facility management system when indoor data was constructed based on BIM data for the linkage between BIM and GIS.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.438-439
• /
• 2011

Substations in Korea are classified into an outdoor steel structure type, an outdoor GIS(Gas Insulated Switchgear) type, an indoor GIS type, an underground GIS type, and a complex GIS type. Before 1970, substations were built in outdoor steel structure types only. In 1980, an 154kV indoor GIS type substation was built for the first time in Pusan. And the first 345kV indoor GIS type substation, the first 765kV full GIS substation were built in 1984 and in 2002 each. In 1998, 154kV indoor type substations were standardized into regular type and urban type which applied steel frames to structures. In 2002, this was re-standardized into five different types in detail. In 2007, hub substations which had high capacity were built in the region of industrial zone and heavy load areas. And 154kV compact substation was developed and standardized by compacting an indoor GIS type substation in 2009. This paper would present a series of substation type transition and application standards for substation types and facility scales.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.441-453
• /
• 2008

With the rapid progress of location based services, GIS, and ubiquitous computing technologies, the space that we are dealing with is no longer limited to outdoor space but being extended to indoor space. Indoor space has some differences from outdoor space, therefore to provide integrated spaces and seamless services, it is required to establish new theories, data models, and systems. For this reason, ambitious project has been launched last year to establish a theoretical background, develop a core technologies and systems, and provide services of indoor spatial awareness. In this paper, we present an overall sketch on the project and major research topics. First, we present the ISA (indoor spatial awareness) project with its goal and research topics. Second, a simplified 3D spatial model, called prism model, is proposed as a basic data types and operators of indoor spatial DBMS. Third, a indoor feature data model, developed T. Kolbe et al. who is a member of this project team, is introduced in this paper. This model provides a basis for the integration of different spaces.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.674-675
• /
• 2015

A 3D indoor model becomes an indiscernible component of BIM (Building Information Modeling) and GIS (Geographic Information System). However, a huge amount of time and human resources are inevitable for collecting spatial measurements and creating such a 3D indoor model. Also, a varied forms of 3D indoor models exist depending on their purpose of use. Thus, in this study, three different 3D indoor models are defined as 1) omnidirectional images, 2) a 3D realistic model, and 3) 3D indoor as-built model. A series of reconstruction methods is then introduced to construct each type of 3D indoor models: they are an omnidirectional image acquisition method, a hybrid surveying method, and a terrestrial LiDAR-based method. The reconstruction methods are applied to a large and complex atrium, and their 3D modeling results are compared and analyzed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.99-105
• /
• 2013

In rapidly developing urban areas that include high-rise, large, and complex buildings, indoor and outdoor maps in GIS become a basis for utilizing and sharing information pertaining to various aspects of the real world. Although an indoor mapping has gained much attentions, research efforts are mostly in 2D and 3D modeling of terrain and buildings. Therefore, to facilitate fast and accurate construction of indoor GIS, this paper proposes a semi-automatic method consisting of preprocessing, 2D mapping, and 3D mapping stages. The preprocessing is designed to estimate heights of building interiors and to identify noise data from point clouds. In the 2D mapping, a floor map is extracted with a tracing grid and a refinement method. In the 3D mapping, a 3D wireframe model is created with heights from the preprocessing stage. 3D mesh data converted from noise data is combined with the 3D wireframe model for detail modeling. The proposed method was applied to point clouds depicting a hallway in a building. Experiment results indicate that the proposed method can be utilized to construct 2D and 3D maps for indoor GIS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.31-38
• /
• 2009

Most 3D models found in the literature focus on theoretical topology for exterior 3D volumes. Although there are a few indoor models such as CityGML or IFC, implementing a full topology for the indoor spaces is either less practical due to the complexity or not even necessary in some application domains. Moreover, current spatial DBMSs do not support functionalities explicitly for 3D topological relations. In this study, an alternative method to build a 3D indoor model with less complexity ernativespatial DBMS is suggested. Focusnation the fact that semantic attributes can be storedion the floor surface, we suggestivemulti-layered 3D model for indoor spaces. We show the process to build the proposed model in the PostGIS, a spatial DBMS. And, then, as an example application, we illustrate the process to build and run a campus building information system.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.31-44
• /
• 2014

According to the purpose of applications, the application program will utilize the most suitable data model and 3D modeling data would be generated based on the selected data model. In these reasons, there are various data sets to represent the same geographical features. The duplicated data sets bring serious problems in system interoperability and data compatibility issues, as well in finance issues of geo-spatial information industries. In order to overcome the problems, this study proposes a spatial data fusion method using topological relationships among spatial objects in the feature classes, called Topological Relation Model (TRM). The TRM is a spatial data fusion method implemented in application-level, which means that the geometric data generated by two different data models are used directly without any data exchange or conversion processes in an application system to provide indoor LBSs. The topological relationships are defined and described by the basic concepts of IndoorGML. After describing the concepts of TRM, experimental implementations of the proposed data fusion method in 3D GIS are presented. In the final section, the limitations of this study and further research are summarized.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.195-199
• /
• 2009

Augmented reality is a field of computer research which deals with the combination of real-world and computer-generated data, where computer graphics objects are blended into real footage in real time and it has tremendous potential in visualizing geospatial information. However, to utilize augmented reality in mobile system, many researches have undergone with GPS or marker based approaches. Localization and tracking of current position become more complex problem when it is used in indoor environments. Many proposed RF based tracking and localization. However, it does cause deployment problems of large sensors and readers. In this paper, we present a noble markerless AR approach for indoor navigation system only using a camera. We will apply this work to mobile seamless indoor/outdoor u-GIS system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2007

People tend to spend more time in indoor spaces than before such as shopping malls and subway stations. As buildings become larger and more complex, people feel difficulty in finding their ways to destinations. Consequently, a means to provide better paths can aid people in reducing time for finding ways. Routing information in large indoor spaces is especially required in emergency cases as fire, power failure and terror. This study suggests to compute optimal paths using $A^*$ algorithm based on raster GIS data structure. The suggested method can be used either in daily lives for path provision or in emergency cases for evacuation, and is illustrated on a campus building.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.113-118
• /
• 2014

Recently, a few studies on context information have been focused to collect phenomena data like a temperature and a humidity in indoor environments. The importance of the former is increasingly recognized with changing environments and increase of heat stress in building. In this paper we present an indoor comfort index framework based on GIS for supporting context information instead of phenomena data in environments. We also present method for supporting comfort index and context information based on GIS in outdoor environments.