• Korean Journal of Radiology
• /
• v.22 no.8
• /
• pp.1300-1309
• /
• 2021

Objective: To assess the feasibility and reproducibility of pancreatic surface lobularity (PSL) quantification derived from abdominal computed tomography (CT) in a population of patients free from pancreatic disease. Materials and Methods: This retrospective study included 265 patients free from pancreatic disease who underwent contrast-enhanced abdominal CT between 2017 and 2019. A maximum of 11 individual PSL measurements were performed by two abdominal radiologists (head [5 measurements], body, and tail [3 measurements each]) using dedicated software. The influence of age, body mass index (BMI), and sex on PSL was assessed using the Pearson correlation and repeated measurements. Inter-reader agreement was assessed using the intraclass correlation coefficient (ICC) and Bland Altman (BA) plots. Results: CT images of 15 (6%) patients could not be analyzed. A total of 2750 measurements were performed in the remaining 250 patients (143 male [57%], mean age 45 years [range, 18-91]), and 2237 (81%) values were obtained in the head 951/1250 (76%), body 609/750 (81%), and tail 677/750 (90%). The mean ± standard deviation PSL was 6.53 ± 1.37. The mean PSL was significantly higher in male than in female (6.89 ± 1.30 vs. 6.06 ± 1.31, respectively, p < 0.001). PSL gradually increased with age (r = 0.32, p < 0.001) and BMI (r = 0.32, p < 0.001). Inter-reader agreement was excellent (ICC 0.82 [95% confidence interval 0.72-0.85], with a BA bias of 0.30 and 95% limits of agreement of -1.29 and 1.89). Conclusion: CT-based PSL quantification is feasible with a high success rate and inter-reader agreement in subjects free from pancreatic disease. Significant variations were observed according to sex, age, and BMI. This study provides a reference for future studies.

• Journal of Community Nutrition
• /
• v.1 no.1
• /
• pp.39-43
• /
• 1999

Anthropometric measurements, particularly weight and height, are the most commonly employed measures of nutritional status in epidemiologic studies because of their simplicity and ease of collection. However, the usefulness of the anthropometric indicator is controversial. The aim of this study was to evaluate the usefulness of the anthropometric indicator to represent the nutritional status of individual adult in epidemiologic studies. In order to evaluate the usefulness of the anthropometric indicator to represent the nutritional status of individual, the validity in terms of sensitivity and specificity of anthropometric indicators was estimated by comparing the biochemical indicators to the reference indicators. The relative validity of dietary intake indicators was also measured for comparison between the three indicators of biochemistry, anthropometry and dietary assessment. The results showed that sensitivity of weight and height and dietary indicators were 16.7 an 50.5, respectively comparing the reference value of 100 as biochemical indicator in identifying anemic adults. Whereas the sensitivity of weight and height and dietary indicators were 63.6 and 36.4, respectively comparing reference value of 100 in identifying hyperlipidemic individuals(obesity). In conclusion, the validity of weight and height is much lower than that of biochemical indicator, burt weight and height still has some usefulness in identifying anemic individuals. Especially, it is more useful in identifying hyperlipidemic individual adults thant in identifying anemic individuals.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.167-180
• /
• 2011

Recently, 3-D audio technologies are commonly implemented through headphones. A major problem of the headphone-based 3-D audio is in-the-head localization, which occurs due to the inaccurate Head-Related Transfer Function (HRTF). Since the individual measurements of HRTFs are impractical, there have been several researches for HRTF customization. In this paper, an efficient method of customizing HRTFs for the sound externalization is proposed. Firstly, it is determined which part will be customized in HRTF through psychoacoustical experiments. Then, the method controlling spectral notches and envelopes to provide individual localization cues are described. Since the proposed method is based on a critical-band rate, the structure is much simpler than that of previous studies, but still effective. The performance was evaluated through a series of subjective tests, and the results confirmed that the customized HRTF using proposed method could replace the measured individual HRTF successfully.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.941-952
• /
• 1999

The purposes of this study were to provide the fundamental data on elementary school girls' somatotype for their clothing construction by contemplating the stage of physical growth dividing into the period of school age and characterizing the variation of body type according to the school age. The results are as follows : 1. Form the results of one-way variables analysis and multiple comparson test(Duncan's test) classification of the period school age can be divided into 'early grade(1 2 grade)' ' middle grade(3 4 grade)' and 'later grade(5 6 grade)' 2. As the results of analyzing Mean Coefficient of Variation and Standard Deviation graph for direct and indirect measurments and index especially of the Coefficient Variation that explain individual difference of growth the items of height indicates individual difference related with height of lower body of early grade group the items of length individual difference related with length of upper body of later grade group and the items of circumference make little difference. The items of anagle makes pretty higher value that direct measurements and especially in lower angle of chest make a distinctive difference, This fact proves that children's somatotype change from the belly part extruded forwards of early and middle grade to the upper body part slanted slightly forward of later grade.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.301-304
• /
• 2006

For the purpose of investigating the contributions of various gases to climate change, the thermal radiation associated with greenhouse gases are extracted from AIRS (Atmospheric Infrared Sounder) infrared radiances over the tropical pacific region. AIRS instrument which was launched on the EOS-Aqua satellite in May 2002 covers the spectral range from 650 cm-1 to 2700 cm-1 with a spectral resolution of between 0.4 cm-1 and 1 cm-1. In order to extract the thermal radiation absorbed by individual gases, the interfering background radiances at the top of the atmosphere are simulated using the radiative transfer code MODTRAN (MODerate spectral resolution atmospheric TRANsmittance). The simulations incorporated the temperature and water vapor profiles taken from NCEP (National Centers for Environmental Prediction) reanalyses. The differences between the simulated background radiance and AIRS-measured radiance result in the absorption of upward longwave radiation by atmospheric gases (i.e. greenhouse effect). The extracted absorption bands of individual gases will allow us to quantify the radiative forcing of individual greenhouse gases and thus those data will be useful for climate change studies and for the validation of radiative transfer codes used in general circulation models.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.691-697
• /
• 2014

Optical measurements of the morphological and biochemical imaging of phytoplankton are presented. Employing quantitative phase imaging techniques, 3-D refractive index maps and high-resolution 2-D quantitative phase images of individual live phytoplankton are simultaneously obtained without exogenous labeling agents. In addition, biochemical information of individual phytoplankton including volume, mass, and density of individual phytoplankton are also quantitatively obtained from the measured refractive index distributions. We expect the present method to become a powerful tool for the study of phytoplankton.

• Imaging Science in Dentistry
• /
• v.42 no.4
• /
• pp.213-217
• /
• 2012

Purpose: This study was performed to evaluate the uniqueness and reliability of the frontal sinuses by comparing various patterns of frontal sinus as observed on Waters' radiographs for individual identification. Materials and Methods: Three Waters' radiographs of 100 individuals, taken on day one, after 6-8 months, and one radiograph with a slight variation in angulation, to mimic conditions out in the field or during autopsy. Three observers were randomly given radiographs from all there packets for comparisons and identification, by the method of superimposition and individual uniqueness. Results: The comparative identification by superimposition of the frontal sinus was 100% positive. The size, shape, unilateral or bilateral presence, absence, and septa were observed to be unique in each case; neither had the measurements changed over a period of time. Conclusion: The need to establish a reliable, low-cost, and easily reproducible method for human identification prompted the elaboration of technical, precise, and accessible parameters, such as the evaluation of the area, asymmetry, and shape of the frontal sinus. Comparison among each of the frontal sinuses of the 100 people in the sample revealed that no two sinuses are the same, that is, the sinus is unique to each individual.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.167-174
• /
• 2014

Heating and air conditioning system is changing rapidly from the traditional HVAC central supply system to the individual supply system with electrical heat pump system (EHP) in Korean school buildings. The individual supply system has advantages to turn on and off individually and to adjust the thermal comfort separately, but energy is wasted in the unoccupied classroom when the last leaving occupant does not turn off the controller. If the controller is to be off automatically while the classroom is not in use, energy consumption would decrease dramatically. This project aims to cease the unnecessary EHP supply in vacant classroom by inputting the class schedule from the central control room to reduce the energy-spending. Experimental measurements were carried out between the controlled classroom that is turned off when not in use and the uncontrolled room that is turned on continually. Occupant's comfort and energy consumption were measured and compared between the controlled case and the uncontrolled case. The energy consumption of controlled classroom case is 30-60% less than that of the uncontrolled classroom case. This result shows that controlling the cooling supply for the unoccupied classroom using the class schedule can decrease the energy consumption remarkably. This supply control system can be used to conserve energy in school structures like universities.

• KDI Journal of Economic Policy
• /
• v.37 no.2
• /
• pp.22-39
• /
• 2015

After a long, dormant period, recent attention has turned to a variety of measurement issues surrounding the concept of human capital. The traditional approach of rely entirely on measures of school attainment, while convenient, is almost certainly misleading. The availability of cognitive skills measures greatly improves on these measurements, but there remains also concern about other unmeasured factors, including noncognitive skills. This paper considers alternative approaches to assessing the role of human capital on individual earnings and on economic growth.

• International Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.5-9
• /
• 2016

This paper briefly introduces efforts into space debris modeling towards a better understanding of space debris environment. Space debris modeling mainly consists of debris generation and orbit propagation. Debris generation can characterize and predict physical properties of fragments originating from explosions or collisions. Orbit propagation can characterize, track, and predict the behavior of individual or groups of space objects. Therefore, space debris modeling can build evolutionary models as essential tools to predict the stability of the future space debris populations. Space debris modeling is also useful and effective to improve the efficiency of measurements to be aware of the present environment.