• 한국멀티미디어학회논문지
• /
• 제23권6호
• /
• pp.738-746
• /
• 2020

In this paper, we propose an indirect PIN entry method that provides enhanced security against smudge, recording, and thermal attacks. Conventional mobile PIN entry methods use on-screen numeric keypad for both use of display and entry. Thus These methods are vulnerable to aforementioned attacks. In our method, passcode is same as that of the conventional PIN entry methods, and that is user-friendly way for mobile device users. Therefore, our method does not reduce user convenience which is one of the advantages of the conventional methods. In addition, our method is not a method of directly touching the on-screen numeric keypad for entering passcode like the conventional PIN methods. Unlike the conventional methods, our method uses an indirect passcode entry method that applied a passcode indicating key. According to the performance comparison result, proposed method provides user convenience similar to the conventional methods, and also provides a higher level of security and safety against recording, smudge, and thermal attacks than the conventional methods.

• 한국멀티미디어학회논문지
• /
• 제25권7호
• /
• pp.932-944
• /
• 2022

Smartphones, are currently equipped with high-performance hardware to process large amounts of data and provide most of the functions provided by desktop PCs. In addition, the smartphones enable quick user authentication through biometric information collected from embedded sensors. However, the biometric authentication method is sometimes rejected due to social and cultural environment, security vulnerabilities, and misrecognition rate. Thus, conventional authentication methods such as PIN and pattern authentication are still mainly used. Consider the latest foldable and bendable smartphones. These devices may be vulnerable to social engineering attacks as they use conventional authentication methods without considering their form factors. In this study, therefore, we propose an authentication method using partial elements of PIN and pattern authentication as a way to increase the security of the conventional authentication methods and consider the recent form factors. According to the performance evaluation results, our method provides improved safety compared to the conventional methods.

• 항공우주시스템공학회지
• /
• 제7권2호
• /
• pp.55-59
• /
• 2013

Before avionics equipment are installed in aircraft, several environmental tests such as temperature, vibration, lightning, fire etc. must be conducted. One of the environmental tests is to substantiate protection designs of lightning indirect effect. It can be showed through RTCA DO-160G, section22 "Lightning Induced Transient Susceptibility" test. An additional test of aircraft level is required as well after installation of avionics equipment.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.611-620
• /
• 2007

Statement of problem: Second-generation indirect composite resins have been improved flexural strength, compressive strength, hydrolytic degradation resistance, wear resistance compared to first-generation indirect composite resins, but there are still some problems as hydrolysis and low wear resistance. Some manufacturers claim that wear resistance of their materials has been improved, but little independent study has been published on wear properties of these materials and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Purpose: This study was to evaluate the wear of indirect composite resins (SR Adore, Sinfony, Tescera ATL) and gold alloy against the human enamel. Material and method: Extracted human incisors and premolars were sectioned to $2{\times}2{\times}2mm$ cube and embedded in the clear resin and formed conical shaped antagonist to fit the jig of pin-on-disk tribometer. Total 20 antagonists were stored in distilled water. Five disk samples, 24mm in diameter and 1.5mm thick, were made for each of three groups of indirect composite resins and gold alloy group, and polished to #2,000 SiC paper on auto-polishing machine. Disk specimens were tested for wear against enamel antagonists. Wear test were conducted in distilled water using a pin-on-disk tribometer under condition (sliding speed 200rpm contact load 24N, sliding distance 160m). The wear of the enamel was determined by weighing the enamel antagonist before and after test, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear mechanisms. Statistical analysis of the enamel wear volume, wear track depth and wear tract width of disk specimens were accomplished with one-way ANOVA and the means were compared for significant differences with Scheffe's test. Results: 1. The enamel wear was most in gold alloy, but there were no statistically significant differences among all the groups (P>.05). 2. In indirect composite resin groups, the group to make the most shallow depth of wear tract was Sinfony, followed by Tescera ATL, SR Adoro (P<.05). Gold alloy was shallower than Sinfony, but there was no statistically significant difference between Sinfony and gold alloy (P>.05). 3. The width of wear tract of SR Adore was larger than the other groups (P<.05), and there were no statistically significant differences among the other groups (P>.05). 4. SEM analysis revealed that Sinfony and gold alloy showed less wear scars after test, Tescera ATL showed more wear scars and SR Adore showed the most. Conclusion: Within the limits of this study, Sinfony and gold alloy showed the least wear rates and showed similar wear patterns.

• 한국항행학회논문지
• /
• 제19권5호
• /
• pp.395-402
• /
• 2015

본 논문에서는 간접낙뢰로 인한 항공기 탑재 컴퓨터의 손상을 보호하기 위한 간접낙뢰 보호장치의 설계 내용 및 시험 과정을 소개한다. 낙뢰로부터 유도된 서지 전압은 항공기 전기 전자장비의 기능 장애나 손상을 가져오는데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자 장비를 보호하기 위해서는 항공기에 가해진 낙뢰로 인한 영향성을 분석하고 이에 따른 보호 설계를 각각의 장비에 적용한다. 본 논문에서는 보호대상 장비의 간접낙뢰로 인한 손상을 방지하기 위하여 수행한 RTCA DO-160G Section22의 카테고리 분석과 선정을 통한 간접낙뢰 수준 결정, 선정된 레벨에 따른 보호회로 설계 방법을 소개한다. 또한 설계된 보호회로의 유효성 확인을 위해 수행한 낙뢰 간접영향 검증시험 결과를 보인다.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 2010

An overload limiter is used to prevent its overturning accident during an operation of a movable crane. Recently the indirect measuring method, which measures hoisting load and overturning moment of overload limiter, demands instead of the existing method, which measures only hoisting load. The indirectly measuring method is how to conduct the hoisting load and overturning moment as measuring the load of hydraulic cylinder for a luffing driving of boom. So we need to develop the multi-angular pin type load cell with the measuring angle of ${\pm}10$ degree instead of the existing load cell with the measuring angle of ${\pm}2$ degree. In this study the finite element analysis is conducted to evaluate the effect of the aspect ratio of measuring cross section on the measuring limit of the load cell to develop the many-angular pin type load cell. For this investigation, the aspect ratio of measuring cross section and load applying angle were adopted as design parameters and the stresses of measuring part were evaluated for each parameter.

• 항공우주기술
• /
• 제4권1호
• /
• pp.247-259
• /
• 2005

자연대기 전기의 항공기에 대한 상호 작용은 비행안전 상에 많은 문제를 초래하고 있다. 상용 항공기는 년간 1회 이상의 낙뢰를 맞는 것으로 보고되고 있으며 낙뢰는 항공기의 운항안전에 큰 위협이 되고 있다. 낙뢰 유도 전압은 항공기 전기․전자장비의 기능 장애 또는 손상을 가져다 주는 데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자장비를 보호하기 위해서는 항공기에 대한 낙뢰의 영향과 항공기 내부 시스템을 분석하고 해당 부품에 대한 위협 내용에 대한 보호 설계를 통해 달성한다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.161-168
• /
• 2004

The dynamic instability of snapping phenomena has been studied by many researchers. Few papers deal with dynamic buckling under loads with periodic characteristics, and the behavior under periodic excitations is expected to be different from behavior under STEP excitations. We investigate the fundamental mechanisms of the dynamic instability when the sinusoidally shaped arch structures are subjected to sinusoidally distributed excitations with pin-ends. The mechanisms of dynamic indirect snapping of shallow arches are especially investigated under not only STEP function excitations but also under sinusoidal harmonic excitations, applied in the up-and-down direction. The dynamic nonlinear responses are obtained by the numerical integration of the geometrically nonlinear equation of motion, and examined by Fourier spectral analysis in order to get the frequency-dependent characteristics of the dynamic instability for various load levels.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.69-76
• /
• 2003

We investigate the fundamental mechanisms of the dynamic instability when the sinusoidal shaped arch structures subjected to sinusoidal harmonic excitation with pin-ends. In nonlinear dynamics, examining the characteristics of attractor on the phase plane and investigating the dynamic buckling process are very important thing for understanding why unstable phenomena are sensitively originated by various initial conditions. In this study, the direct and the indirect snap-buckling of shallow arches considering geometrical nonlinearity are investigated numerically and compared with the step excitation critical load.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.185-192
• /
• 2002

In this study, we choose the sinusoidal shaped arch with pin-ends subjected to sinusoidal distributed excitation to investigate the fundamental mechanism of the dynamic instability. We derive the nonlinear equations of motion to investigate the instability phenomenon of arch structures and Identify the buckling characteristics of sinusoidal shaped arch structures through the nonlinear eigenvalue analysis with discreted equations of motion by Galerkin's method. We examine that phenomenons which direct snapping and indirect snapping with backbone curves to understand occurrence paths of the dynamic buckling.