• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.611-620
• /
• 2016

In the construction of nuclear power plants, only 420 MPa reinforcing bars are allowed and, therefore, so many large-diameter bars are placed, which results in steel congestion. Consequently, re-bar works are difficult and the quality of RC structures may be deteriorated. To solve the steel congestion, 550 MPa bars are necessary. Among many items for verifying structural performance of reinforced concrete with 550 MPa bars, the 43 mm hooked bars are examined in this study. All specimens failed by side-face blowout and the side cover explosively spalled at maximum loads. The bar force was initially transferred to the concrete primarily by bond along a straight portion. At the one third of maximum load, the bond reached a peak capacity and began to decline, while the hook bearing component rose rapidly. At failure, most load was resisted by the hook bearing. For confined specimens with hoops, the average value of test-to-prediction ratios by KCI code is 1.45. The modification factor of confining reinforcement which was not allowed for larger than 35 mm bars can be applied to 43 mm hooked bars. For specimens with 70 MPa concrete, the average value of test-to-prediction ratios by KCI code is 1.0 which is less than the values of the other specimens. The effects of concrete compressive strength should be reduced. An equation to predict anchorage capacity of hooked bars was developed from regression analysis including the effects of compressive strength of concrete, embedment length, side cover thickness, and transverse reinforcement index.

• The Journal of the Korean dental association
• /
• v.48 no.6
• /
• pp.469-477
• /
• 2010

The purpose of this study was to evaluate the effect of two dentin desensitizers and Er,Cr:YSGG laser for dentinal tubule occlusion. Twenty recently extracted single-rooted human teeth were used to obtain root dentinal fragments. The crowns were cut approximately 1mm below the cementum enamel junction(CEJ). A second cut was used to remove the apex of the root. Subsequently, a longitudinal cut was made in order to obtain 2 fragments from each root sample. The cementum from the cervical portion was removed using a high-speed diamond-coated bur in order to expose the dentin. To open dentinal tubules, forty samples were treated with 50% citric acid for 2 min and then rinsed under distilled water for 1 min. These were divided into four groups of ten samples each. The first group served as a control group. In group 2, the samples were irradiated with the Er,Cr:YSGG laser(Waterlase MD, Biolase, USA). In group 3, the samples were treated with Bisblock and ONE-STEP PLUS(Bisco, USA). In group 4, the samples were treated with Gluma comfort bond & Desensitizer(Heraeus Kulzer, Germany). All the samples were examined using Scanning electron microscopy(Hitachi, S-4700, Japan) with two different magnifications(X2000, X5000). These images were assessed by one examiner who was blind to the experimental procedure, using the index of smear layer removal. The distribution of smear layer removal grades was tested using Fisher's exact test. On the order hand, in order to evaluate the occluding effect of two dentin desensitizers and Er,Cr:YSGG laser, the number of exposed dentinal tubules was counted in each group. These were evaluated using the Kruskal-Wallis test with significance predetermined $\alpha$=0.05. There were statistically significant differences between the three groups(Er,Cr:YSGG laser, Bisblock+ONE-STEP PLUS, Gluma comfort bond & Desensitizer) and control group.

• Journal of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.85-96
• /
• 1974

Extended H ckel Theory and CNDO/2 MO calculation methods have been applied to $C_6H_5YCH_2Cl$(Y = None, -$CH_2$-, -O-, -S-, -CO-, -$SO_2$-). It has been shown that charge distributions in molecules are mainly controlled by the migration of valence inactive electron, giving the order of ${\sigma}$-acceptor and ${\pi}$-donor effects -O- > -S- > -$CH_2$- > -$SO_2$-. The -CO- group exceptionally acts as ${\sigma}$-donor and ${\pi}$-acceptor. It was also predicted that, $S_N2$ reactivities of C$C_6H_5YCH_2Cl$ would be in the order of -O-${\thickapprox}$-CO- >>-S-${\thickapprox}$None > -$CH_2$-, neglecting solvent effect. From the results of our studies, we conclude that the structural factors influencing 의 $S_N$ reactivities will be: (1) positive charge developments on reaction center carbon atom (2) energy level of ${\sigma}$-antibonding unoccupied MO with respect to C-Cl bond. (3) ${\sigma}$-antibonding strength of C-Cl bond at that level.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.485-498
• /
• 2019

Pre-tensioned rock bolts can be classified into fully anchored, lengthening anchored and point anchored bolts based on the bond length of the resin or cement mortar inside the borehole. Bolts in varying anchoring methods may significantly affect the supporting effect of surrounding rock around a tunnel. However, thus far, the theoretical basis of selecting a proper anchoring method has not been thoroughly investigated. Based on this problem, 16 schemes were designed while incorporating the effects of anchoring length, pretension, bolt length, and spacing, and a systematic numerical experiment was performed in this paper. The distribution characteristics of the stress field in the surrounding rock, which corresponded to various anchoring scenarios, were obtained. Furthermore, an analytical approach for computing the active and passive strengthening index of the anchored surrounding rock is presented. A new fully anchoring method with pretension and matching technology are also provided. Then, an isolated loading model of the anchored surrounding rock was constructed. The physical simulation test for the bearing capacity of the model was performed with three schemes. Finally, the strengthening mechanism of varying anchoring methods was validated. The research findings in this paper may provide theoretical guidelines for the design and construction of bolting support in tunnels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6534-6542
• /
• 2015

This study examines the relation between mutual fund performance and fund flows in Korean market using weekly and monthly data. The results are as follows. First, the relation between the two variables varies across fund types. Even the relations in equity fund and index fund are different from each other. Second, the structural change in the mutual fund market affect significantly the relation between the two variables. Third, return chasing flow is observed constantly in bond fund and it is observed only after the structural change for equity fund and MMF. However, no return chasing flow is observed for index fund. Fourth, mutual fund flows affect subsequent fund returns only in MMF after the structural change.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.243-252
• /
• 2014

Many researches about the effect on politics, economics and Sociocultural phenomenon using the social media are in progress. Authors utilized NAVER Trend most famous web browsing service in korea, NAVER Blog social media, NAVER Cafe service and Open Data(API) and also used temperature, humidity index data of Korea Meteorological Administration. This study analyzed a change of the public's emotion in korea using Cluster analysis of vocabulary of taste among its of feelings and senses. K-means clustering was followed by decision of the number of groups which was used Chi-square goodness of fit test and ward analysis. Eight groups was made and it represented sensitive vocabulary. By Discriminant analysis, eight groups decided by Cluster analysis has 98.9% accuracy. The change of the public's emotion has capability to predict people's activity so they can share sensibility and a bond of sympathy developed between them.

• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.643-657
• /
• 2020

This study presents experimental and numerical investigations on circular steel tube confined ultra high performance concrete (UHPC) columns under axial compression. The plain UHPC without fibers was designed to achieve a compressive strength ranged between 150 MPa and 200 MPa. Test results revealed that loading on only the UHPC core can generate a significant confinement effect for the UHPC core, thus leading to an increase in both strength and ductility of columns, and restricting the inherent brittleness of unconfined UHPC. All tested columns failed by shear plane failure of the UHPC core, this causes a softening stage in the axial load versus axial strain curves. In addition, an increase in the steel tube thickness or the confinement index was found to increase the strength and ductility enhancement and to reduce the magnitude of the loss of load capacity. Besides, steel tube with higher yield strength can improve the post-peak behavior. Based on the test results, the load contribution of the steel tube and the concrete core to the total load was examined. It was found that no significant confinement effect can be developed before the peak load, while the ductility of post-peak stage is mainly affected by the degree of the confinement effect. A finite element model (FEM) was also constructed in ABAQUS software to validate the test results. The effect of bond strength between the steel tube and the UHPC core was also investigated through the change of friction coefficient in FEM. Furthermore, the mechanism of circular steel tube confined UHPC columns was examined using the established FEM. Based on the results of FEM, the confining pressures along the height of each modeled column were shown. Furthermore, the interaction between the steel tube and the UHPC core was displayed through the slip length and shear stresses between two surfaces of two materials.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2016

Polyurethane foam index a of the cell structure and the absorption change by using the foam stabilizer of six to investigate the polyurethane foam index producing the agent to the siloxane analyzed with silicon foam stabilizer with FE-SEM in accordance with the characteristics of the silicon-based foam stabilizer cell structure of the primary DC-193 on the chain ends is PO n dog bond, DC-2585, DC-5125, DC-198 has been confirmed as a close cell, silicone surfactant is combined EO n dog to a siloxane main chain terminus DC-5043 and DC-5598 that appeared to open cell structure. In addition, most absorption of the DC-5043 appeared was the size of the open cell greatest formed by the absorption of the cell structure change this absorption of the size of the close cell most detailed and uniform DC-193 appeared small household water-resistant best many showed. The performance test of the water was found to be excellent.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.321-339
• /
• 2002

The result of variance decomposition through yield of Treasury of 30 year maturity of USA, S&P 500 index, stock price of KEPCO has 76.12% of impulse of KEPCO stock price at short-term horizon, but they have 51.40% at long-term horizon. After one year, they occupy 13.65%, and 33.25%. So their effects are increased. By the way, S&P 500 index and yield of Treasury of 30 year maturity of USA have relatively more effect for forecast of stock price oi KEPCO at short-term & long-term. The yield of Treasury of 30 year maturity of USA more than S&P 500 index have more effect for stock price of KEPCO. It is why. That foreign investors through fall of stock price of USA invest for emerging market is less than movement for emerging market of hedge funds through effect of fall of yield of Treasury of 30 year maturity of USA, according to relative effects for stock price of Korea companies. The result of variance decomposition through won/dollar foreign exchange rate, yield of corporate bond of 3 year maturity, Korea Stock Price index(KOSPI), stock price of KEPCO has 81.33% of impulse of KEPCO stock price at short-term horizon, but they have 41.73% at long-term horizon. After one year, they occupy 23.57% and 34.70%. So their effects are increased. By the way, KOSPI and won/dollar foreign exchange rate have relatively more effect for forecast of stock price of KEPCO at short-term & long-term. The won/dollar foreign exchange rate more than KOSPI have more effect for stock price of KEPCO. It is why. The recovery of economic condition through improvement of company revenue causes of rising of KOSPI. But, if persistence of low interest rate continues, fall of won/dollar foreign exchange rate will be more aggravated. And it will give positive effect for stock price of KEPCO. This gives more positive effect at two main reason. Firstly, through fall of won/dollar foreign exchange rate and rising of credit rating of Korea will be followed. Therefore, foreign investors will invest more funds to Korea. Secondly, inflow of foreign investment funds through profit of won/dollar foreign exchange rate and stock investment will be occurred. If appreciation of won against dollar is forecasted, foreign investors will buy won. Through this won, investors will do investment. Won/dollar foreign exchange rate is affected through external factors of yen/dollar foreign exchange rate, etc. Therefore, the exclusion of instable factors for foreign investors through rising of credit rating of Korea is necessary things.

• Journal of the Korean Society of Combustion
• /
• v.16 no.3
• /
• pp.33-40
• /
• 2011

Combustion experiments were conducted at three different fuels ($CH_4$, $C_2H_4$ and $C_3H_8$) to investigate the effects of combustor pressure (30 ~ -30 kPa) on combustion charateristics and reaction zone structure. Regardless of the fuels, emission index of CO (EICO) increased with decreasing combustor pressure, and EICO of $C_2H_4$ was mostly affected by changing combustor pressure at subatmospheric pressure. In order to observe reaction zone, $OH^*$, $CH^*$ and ${C_2}^*$ chemiluminescence intensity were measured. The sequence of the chemiluminescence intensity peak position was affected by chemical characteristics of fuels rather than changing combustor pressure. The emission zone thickness of $C_2H_4$ and $C_3H_8$, defined by the full width at half maximum (FWHM) of $CH^*$ intensity profile, were increased with decreasing combustor pressure. however, the thickness of $C_2H_4$ exhibited the opposite tendency due to the characteristics of the fuel as the bond structure.