• 한국컴퓨터정보학회논문지
• /
• 제13권7호
• /
• pp.291-305
• /
• 2008

모바일 기술의 진화는 전통적인 음악 산업의 보완과 새로운 음악시장의 확대는 물론이고 음악시장에 새로운 패러다임을 만들어 가고 있는 등 음악 산업에 막대한 영향을 미치고 있다 그러나 현재까지의 모바일 음악콘텐츠에 관한 연구는 모바일 콘텐츠 전반에 대한 분석에 치중되어 있어서 실질적으로 모바일 음악콘텐츠 상품을 개발하고, 서비스를 제공하는 기업들에게 유익한 자료를 제공해 주기 어려웠다. 따라서 본 연구는 음악콘텐츠를 생산, 유통, 판매하는 기업의 입장에서 소비자들의 어떤 요인이 모바일 음악콘텐츠 상품의 지속적 사용에 영향을 미칠지에 대하여 연구 및 분석하였다. 모바일 음악콘텐츠 지속적 사용에 영향을 미치는 요인에 대한 구체적인 분석을 하기 위해 모바일 음악콘텐츠를 벨소리 콘텐츠, 통화연결음 콘텐츠, 음악전곡다운로드 콘텐츠 3가지 유형으로 분류하고, 각 유형별로 지속적 사용에 영향을 미치는 요인을 분석하였다. 연구결과는 첫째, 벨소리콘텐츠의 경우 이용경력, 차별성, 편재성이 인지된 용이성에 영향을 미치고 신뢰성, 보안성, 맞춤성이 인지된 유용성에 영향을 미치며, 인지된 용이성은 인지된 유용성과 지속적 사용에 영향을 미치며, 인지된 유용성은 지속적 사용에 영향을 미치는 것으로 나타났다. 둘째, 통화연결은 콘텐츠의 경우는 인지된 용이성이 지속적 사용에 영향을 미치지 않는 것을 제외하고는 벨소리콘텐츠의 결과와 동일하게 나타났다. 셋째, 음악전곡 다운로드의 경우 이용경력, 복제가능성, 신뢰성이 인지된 용이성에 영향을 미치고, 이용경력 맞춤성이 인지된 유용성에 영향을 미치며, 인지된 용이성과 인지된 유용성이 지속적 사용에 영향을 미치는 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.959-965
• /
• 2002

Effective hydraulic conductivity of a statistically anisotropic heterogeneous medium is obtained for steady two-dimensional flows employing stochastic analysis. Flow equations are solved up to second order and the effective conductivity is obtained in a semi-analytic form depending only on the spatial correlation function and the anisotropy ratio of the hydraulic conductivity field, hence becoming a true intrinsic property independent of the flow field. Results are obtained using a statistically anisotropic Gaussian correlation function where the anisotropy is defined as the ratio of integral scales normal and parallel to the mean flow direction. Second order results indicate that the effective conductivity of an anisotropic medium is greater than that of an isotropic one when the anisotropy ratio is less than one and vice versa. It is also found that the effective conductivity has upper and lower bounds of the arithmetic and the harmonic mean conductivities.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.143-155
• /
• 2014

The stability issues of a multi-module distributed DC power system without current-sharing loop are analyzed in this study. The physical understanding of the terminal characteristics of each sub-module is focused on. All the modules are divided into two groups based on the different terminal property types, namely, impedance (Z) and admittance (Y) types. The equivalent circuits of each group are established to analyze the stability issues, and the mathematical equations of the equivalent circuits are derived. A generalized criterion for multi-module distributed systems is proposed based on the stability criterion in a cascade system. The proposed criterion is independent of the power flow direction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2230-2234
• /
• 2003

This paper proposes a distributed simulator for general control system in CEMTool. Systems can be described by SIMTool likes the simulink in Matlab. For distributed simulation, we can seperate any system into several parallel subsystems in SIMTool. The number of parallel subsystem can be determined by the system's property. After seperation, parallel simulator will do initialization, one-step-ahead simulation, block-distribution and ordering and so on. Finally, simulator will create independent C codes and executive files for each subsystem. The whole system is fulfilled by several PCs, and each PC executes one subsystem. There are communications among these subsystem using reflective memory or ethernet. We have made several experiments, and the 5-stand cold rolling mill control system is our main target. The result of parallel simulation has shown effective speedup in comparison with one pc simulation.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.833-845
• /
• 2015

Natural frequencies of the structural systems should be far away from the excitation frequency in order to avoid or reduce the destructive effects of dynamic loads on structures. To accomplish this goal, a structural optimization on size and shape has been performed considering frequency constraints. Such an optimization problem has highly nonlinear property. Thus, the quality of the solution is not independent of the optimization technique to be applied. This study presents the performance evaluation of the recently proposed meta-heuristic algorithm called Teaching Learning Based Optimization (TLBO) as an optimization engine in the weight optimization of the truss structures under frequency constraints. Some examples regarding the optimization of trusses on shape and size with frequency constraints are solved. Also, the results obtained are tabulated for comparison. The results demonstrated that the performance of the TLBO is satisfactory. Additionally, TLBO is better than other methods in some cases.

• 지질공학
• /
• 제6권1호
• /
• pp.45-49
• /
• 1996

Sacke Rydelck(1995)에 의해서 제외된"지진양자"의 개념기 일반형으로나타낼 수 있다는 것이 보여진다.대지진에 대해서 응력강하(stress drop)은 거의 일정한 데,소규모 지진에 대해서 응력강학가 모멘트에 비례하는 성질이 지진양자의 파열기준(failure criteria)과 무관한 것으로 보인다. 지진양자의 물리적 의의는 '사이스몬(Seismon)'이란 관점으로 논의 된다.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1119-1121
• /
• 2008

The effects of storage time (0, 1, and 2 month) and temperature (5, 15, and $25^{\circ}C$) on the dynamic rheological properties of hot pepper-soybean paste (HPSP) mixed with acetylated starches (AS) were studied by small-deformation oscillatory measurements. Dynamic moduli (G', G", and $\eta^*$) values of HPSP-AS mixtures increased with an increase in storage time and also decreased with increasing storage temperature. However, dynamic moduli values of the control (no added AS) were independent on storage time and temperature. Tan $\delta$ values (ratio of G"/G') in all HPSP samples did not change much with an increase in storage time and temperature. After 2 months of storage, the dynamic moduli of the HPSP-AS mixture samples were much lower than those of the control, indicating that the addition of AS can inhibit the retrogradation that developed over a long period of storage. Structural and rheological properties of HPSP samples seem to be stabilized by the presence of AS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.37-38
• /
• 2008

In this paper, we have developed Organic light-emitting devices(OLEDs) using various thicknesses of new electron transport layer. The device structure of ITO/ 2-TNATA(15nm)/ DPVBi(40nm)/ New ETL(20nm,60nm,100nm)/ LiF(0.5nm)/Al(100nm) has been used. The operating voltage of the device was almost independent of the new ETL thickness, due to its high electron conducting property. For example, the operating voltages of the devices with 20nm and 60nm layers are almost 5V at a current density $200mA/cm^2$. The device with the new ETL shows the low turn-on of 2.5V.

• Communications for Statistical Applications and Methods
• /
• 제13권3호
• /
• pp.513-524
• /
• 2006

In this paper, we introduce a new notions of conditionally weak dependence and we study their properties, preservation of the conditionally weak independent and positive and negative quadrant dependent(CWQD) property under mixtures, limits, closure under convex combinations, and their interrelationships. Furthermore, we extend multivariate stochastic dependence to stronger conditions of dependence.

• Interaction and multiscale mechanics
• /
• 제1권1호
• /
• pp.83-101
• /
• 2008

A derivation is given of two-scale models that are able to describe deformation and flow in a fluid-saturated and progressively fracturing porous medium. From the micromechanics of the flow in the cavity, identities are derived that couple the local momentum and the mass balances to the governing equations for a fluid-saturated porous medium, which are assumed to hold on the macroscopic scale. By exploiting the partition-of-unity property of the finite element shape functions, the position and direction of the fractures are independent from the underlying discretization. The finite element equations are derived for this two-scale approach and integrated over time. The resulting discrete equations are nonlinear due to the cohesive crack model and the nonlinearity of the coupling terms. A consistent linearization is given for use within a Newton-Raphson iterative procedure. Finally, examples are given to show the versatility and the efficiency of the approach.