• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1869-1883
• /
• 2016

In recent years, some converter structures and analyzing methods for the voltage regulation of stand-alone self-excited induction generators (SEIGs) have been introduced. However, all of them are concerned with the three-phase voltage control of three-phase SEIGs or the single-phase voltage control of single-phase SEIGs for the operation of these machines under balanced load conditions. In this paper, each phase voltage is controlled separately through separated converters, which consist of a full-bridge diode rectifier and one-IGBT. For this purpose, the principle of the electronic load controllers supported by fuzzy logic is employed in the two-different proposed converter structures. While changing single phase consumer loads that are independent from each other, the output voltages of the generator are controlled independently by three-number of separated electronic load controllers (SELCs) in two different mode operations. The aim is to obtain a rated power from the SEIG via the switching of the dump loads to be the complement of consumer load variations. The transient and steady state behaviors of the whole system are investigated by simulation studies from the point of getting the design parameters, and experiments are carried out for validation of the results. The results illustrate that the proposed SELC system is capable of coping with independent consumer load variations to keep output voltage at a desired value for each phase. It is also available for unbalanced consumer load conditions. In addition, it is concluded that the proposed converter without a filter capacitor has less harmonics on the currents.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.760-768
• /
• 2016

Recently, as one of the policies for carbon free operation method of independent power system replacing diesel generator with renewable energy such as wind power and photovoltaic(PV) system has been presented. Therefore, this paper proposes an operation algorithm and modeling of independent power system by considering CVCF(constant voltage constant frequency) ESS(energy storage system) for constant frequency and voltage, LC(load control) ESS for demand and supply balancing and SVC(static var compensator) for reactive power compensation. From the simulation results based on the various operation scenario, it is confirmed that proposed operation algorithm and modeling may contribute stable operation and carbon free in independent power system.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1199-1206
• /
• 2022

Fossil fuels are one of the various energy sources used by humans, and industrial development has been achieved by relying on fossil fuels for a long time in the past. In order to respond to the depletion of fossil fuels and climate change, the world is trying to build an eco-friendly energy ecosystem. Research on efficiency improvement using renewable energy and ESS in various ways for energy conversion is being promoted. In this paper, a microgrid for industrial complexes was designed, constructed, and demonstrated. It was operated in two modes: an independent mode that each plant generates and uses independently and a connected operation mode that allows energy sharing between factories. In the case of independent mode, PV and PCS were intermittently stopped and restarted according to the status change of SoC section of each site. But, in the case of the connected operation mode, stable power supply was confirmed through power transaction through the operation of the entire SoC. This paper presented and verified an algorithm to stably supply power to industrial complexes consisting of various consumers with different load characteristics.

• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.181-188
• /
• 2016

본 논문은 경제급전 최적화 문제에 개별 발전회사별로 독립적으로 경제급전을 수행하는 방법에 비해 중앙에서 통합하여 경제급전 최적화를 수행하는 경우가 보다 경제적임을 보였다. 이 경우에 적용된 알고리즘으로 밸브지점으로 발전량을 조절하는 균형방법을 수행한 후 발전량을 감소시킬 때의 비용 감소분과 증가시킬 때의 비용 증가분 차이로 발전량을 상호 교환하는 방법으로 최적화를 수행하였다. 10대, 13대과 40대-발전기를 독립적으로 운영하는 경우와 통합된 63대-발전기를 경제급전하는 경우를 비교한 결과 통합운영 방법이 독립적 경제급전에 비해 발전비용을 획기적으로 감소시켜 경제적인 이익을 극대화 시킬 수 있음을 보였다.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.905-913
• /
• 2017

Advanced reactor designs often feature longer operating cycles between refueling and new concepts of operation beyond traditional baseload electricity production. Owing to this increased complexity, traditional proportional-integral control may not be sufficient across all potential operating regimes. The prototypical advanced reactor (PAR) design features two independent reactor modules, each connected to a single dedicated steam generator that feeds a common balance of plant for electricity generation and process heat applications. In the current research, the PAR is expected to operate in a load-following manner to produce electricity to meet grid demand over a 24-hour period. Over the operational lifetime of the PAR system, primary and intermediate sodium pumps are expected to degrade in performance. The independent operation of the two reactor modules in the PAR may allow the system to continue operating under degraded pump performance by shifting the power production between reactor modules in order to meet overall load demands. This paper proposes a Takagi-Sugeno (T-S) fuzzy logic-based power distribution system. Two T-S fuzzy power distribution controllers have been designed and tested. Simulation shows that the devised T-S fuzzy controllers provide improved performance over traditional controls during daily load-following operation under different levels of pump degradation.

• 한국경영과학회지
• /
• 제26권1호
• /
• pp.71-85
• /
• 2001

This paper considers a cost model for a U-shaped manufacturing cell formation which incorporates a required number of machines and various material flows together under multi-part multi-cell environment. The model is required to satisfy both the specified operation sequence of each part and the total part demand volume, which are considered to derive material handling cost in U-shaped flow line cells. In the model several cost-incurring factors including set-up for batch change-over, processing time for operations of each part, and machine failures are also considered in association with processing load and capacity of each cell. Moreover, a heuristic for a good machine layout in each cell is newly proposed based on the material handling cost of each alternative sequence layout. These all are put together to present an efficient heuristic for the U-shaped independent-cell formation problem, numerical problems are solved to illustrate the algorithm.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.455-461
• /
• 2009

This paper proposes Direct Load Control(DLC) operation scheme using a bidding system and the methodology to value proper quantity decided by the DLC program, which is a kind of resources for stabilization of electricity market price during peak times by managing consumer electricity demand. Since DLC program in Korea is based on the contract with the customers participating in this program, it is difficult to anticipate voluntary participation. That is, incentive for participants in DLC program is insufficient. To cope with this point, it is necessary to develop a new market mechanism and market compatible operation scheme for DLC programs. DLC market mechanism is deemed to be equipped with iterative bidding system, independent operation from energy market, and interactive with bidding information on energy market. With this market mechanism, it is important to find the optimal operation point of DLC allowing for the factors of stabilizing the electricity market price and compensating DLC implementation. This paper focuses on the mathematical approaches for the bid-based DLC operation scheme and examines several scenarios for the following technical justifications: 1) stabilization of electricity market price during peak times, 2) elasticity of demand.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1407-1418
• /
• 2018

Novel mechanism of customized adequacy formulation is proposed in order to enhance micro grids system reliability. The mechanism accounts for 2-levles of load curtailment, and is mainly based on probabilistic load profile and hybrid Distributed Generation (DG) units modeling. The two load curtailments are needed in order to ensure adequate technical constraints at steady state condition during islanding mode of operation. The effectiveness of the proposed formulation has been verified using system independent analytical expressions for the evaluation of both reliability and Expected Energy Not Served (EENS) indices. The evaluation has examined the impact of different penetration levels of Hybrid DG Units in case study islands. Results show the enhancement of the overall distribution system reliability and the recommended conditions for successful islanding mode of operation.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.181-186
• /
• 2019

도서 지역과 같은 환경에서 기존 상용 독립계통 디젤 발전기에서 소모되는 화석연료를 저감하기 위해 독립계통 용량의 40% 이상을 부담하는 태양광발전시스템의 개발이 필요하다. 이러한 개발을 위해 우선적으로 도서 지역에 설치된 독립계통의 안정성을 향상시키고 고품질의 전력을 부하에 공급해줄 수 있는 대용량 인버터 개발이 필요하다. 또한, 독립계통 태양광 발전시스템을 위한 EMS용 발전제어 시스템은 태양광 발전원 계통과 연계된 디젤 발전기의 병렬운전 전력제어시스템으로서 부하율과 태양광발전에 따른 디젤 발전기 출력을 제어하여 해당 부하에 전력을 안정적으로 공급하는 시스템이 필요하다. 이러한 독립계통형 태양광 발전시스템으로 인해 독립계통 지역에 대한 태양광 보급 확대 및 독립계통의 전력안정도를 증가시킬 수 있으며 독립계통의 유 무효 전력 제어에 따른 화석연료 사용 저감이 추가적으로 기대되며, PCS 사용률의 증가로 경제성 조기 확보를 기대할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1273-1275
• /
• 1999

This paper describes the optimal operation scheduling on cogeneration systems which have thermal loads of different pressure each other. The cogeneration systems has two units and operate connecting with various auxiliary devices as heat storage tanks, independent generators and auxiliary boilers. The optimal modeling and scheduling technique proposed in this paper will be applied to industrial cogeneration systems.