• 제목/요약/키워드: Incurred loss

검색결과 88건 처리시간 0.023초

Rational Criterion of Suing and Labouring Charge in Marine Insurance -Using Game Theoretic Approach-

  • Kang, Jun-Won
    • 한국항만경제학회지
    • /
    • 제20권2호
    • /
    • pp.73-87
    • /
    • 2004
  • The purpose of this paper is to setup reasonable criterion for underwriters to reimburse the expenses of suing and labouring incurred by assured, using game theory. As for the upper limit for the reimbursement, MIA and ICC do not mention at all but stipulate that proper and reasonable expenses shall be reimbursed, while ITC-Hulls set the amount insured as the upper limit to compensate the sum of expenses and damage loss. And as for failed measures of averting and minimizing loss, MIA and ICC do not mention either, while ITC-Hulls stipulates underwriters shall compensate the expenses and damage loss within the amount insured. The main results of this paper are as follows: First, it is for the benefit of underwriters to reimburse the expenses incurred to take such reasonable measures to avert or minimizing a loss which would be recoverable under the insurance. Second, the expenses of single measure should not be above the amount insured. Third, even if the measures failed, the expense should be reimbursed if it is less than the expected value of the subject-matter insured that could be recovered by the measures. Last, if the measures are taken several times individually, even if the sum of expenses might be above the amount insured, it should be reimbursed.

  • PDF

국내 공공공사에서 발주자 손실의 금융비용 사례연구 (A Case Study on Owner's Loss Incurred due to the Financial Cost of Public Construction Works in Korea)

  • 정민;이강
    • 한국건설관리학회논문집
    • /
    • 제9권3호
    • /
    • pp.136-145
    • /
    • 2008
  • 현행 규정에 따라 기성을 지급하였어도 공공공사 발주자가 공사대금 이외에 금융비용이라는 추가비용을 부담해야 되는 경우가 발생되고 있다. 본 연구는 공공공사 건설과정에서 발생하는 금융비용을 파악하기 위하여 실제 공공공사 기성지급사례를 토대로 다음과 같은 연구결과를 도출하였다. 첫째 금융비용 발생원인을 분석하였고, 둘째 전체 금융비용 규모를 파악하고 이 중 발주자에게 미치는 영향을 파악하였으며, 셋째 금융비용이 발생시점에 따라 전체 금융비용에 미치는 영향을 비교 분석하였다. 본 연구에서 2건의 공공공사 금융비용 사례 분석결과 금융비용을 최소화하기 위해서는 입찰설명서 등 공사 착수 전에 공정과 기성관리 세부기준을 설정해야 한다. 또한 금융비용은 발생시점에 비례하여 발생하므로 공사초기의 공정관리에 집중해야 하는 것으로 분석되었다. 공공기관 건설공사 기성이 매년 2조 3천억 이상 발생되고 있지만 건설과정에서 기성지급 시 발생되는 금융비용이 얼마나 되는지 산출된 연구결과가 없어 그 규모를 인식하지 못하였다. 따라서 본 연구결과를 통하여 공공공사 시 기성지급으로 발생되는 금융비용 규모를 인식하고 관련규정의 보완과 대안을 도출해 내는 데 연구의 목적이 있다.

소말리아 해적사건을 통한 해적행위와 해상보험자의 책임에 관한 연구 (A Study on Piracy and the Liability of the Insurer based on Somali Pirates)

  • 최병권
    • 무역상무연구
    • /
    • 제59권
    • /
    • pp.113-135
    • /
    • 2013
  • Piracy has been an ongoing and serious problem in international shipping industry. Somalia is often in the news these days. Somalia has been in a state of unrest for more than two centuries. In recent times, the situation has remained unstable. The persistent unrest is the major driver behind the piracy epidemic in Somalia waters. By the MIA 1906, s.78(1), the expenses in order to be recoverable must have been "properly incurred". The underwriter is also liable in certain circumstances for expenses incurred by the assured in an attempt to avert or diminish loss covered by the policy, under provisions. This class of expenditure is commonly referred to as sue and labour expenses, or suing and labouring expenses; less commonly, as particular charges. The standard marine policy(the S.G.Form) contained what was invariably called the sue and labour clause, which has been replaced in the current Institute Clauses by the "Duty of Assured(Sue and Labour)" Clause in the Hull Clauses, and the "Duty of Assured" Clause, headed "Minimizing losses", in the Cargo Clauses. Sue and labour charges are not confined to expenditure on the part of the assured and his agents, but can include quantified loss consequent upon a sacrifice properly and reasonably made to avert or minimize an insured loss.

  • PDF

탈립성(脱粒性), 단간종(短稈種)인 통일계품종(統一系品種)에 적합(適合)한 바인더의 개량(改良) 개발(開発)에 관(関)한 연구(硏究) (II) (Modification of the Existing Binders for Highly-Shattering, Short-Stem Rice Varieties (II))

  • 정창주;최희승;유관희;고학균;김성래
    • Journal of Biosystems Engineering
    • /
    • 제8권2호
    • /
    • pp.18-25
    • /
    • 1983
  • The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

  • PDF

자탈형(自脱型) 콤바인의 배진손실(排塵損失)에 관(關)한 연구(硏究)(I) -자탈형(自脱型) 콤바인의 배진손실(排塵損失) 모니터 개발- (Chaff-outlet Grain Loss of Head-feed Combine -Development of a Monitor for Detecting Chaff-outlet Grain Loss of Head-feed Combine-)

  • 정창주;최중섭;최영수
    • Journal of Biosystems Engineering
    • /
    • 제14권4호
    • /
    • pp.251-261
    • /
    • 1989
  • The amount of grain loss incurred during harvesting operation through the chaff-outlet of combine may not be negligible. To minimize this grain loss and optimize condition of combining, it may be necessary that the amount of chaff-outlet loss dependent on varying crop condition is to be estimated as exactly as possible. This study was thus intended to develop the monitor that could indicate the amount of grain loss occurred through the chaff-outlet of combine during harvesting operation. The function of this monitor is to measure at the sounding board the impact sound of paddy kernels which could be distinguished from those of other threshing products through chaff-outlet, and from vibration or noise created by the combine engine and other moving parts. To develop such monitor, the frequency distributions of each sound generated by the impact of grain and chaff, the sound generated by the impact of the mixture of grain and chaff, and vibration or noise created by the combine engine and other moving parts were investigated experimentally. From the results of frequency analyses, the trainsducer adequate for the monitering system was selected and sounding board was constructed. The grain loss monitor thus obtained was tested by attaching the sounding board to the chaff-outlet of combine.

  • PDF

Consideration of the Carrier Based Signal Injection Method in Three Shunt Sensing Inverters for Sensorless Motor Control

  • Jung, Sungho;Ha, Jung-Ik
    • Journal of Power Electronics
    • /
    • 제16권5호
    • /
    • pp.1791-1801
    • /
    • 2016
  • This paper considers a carrier based signal injection method for use in the three shunt sensing inverter (TSSI) for sensorless motor control. It also analyzes the loss according to the injection axis of the voltage signal. To remove both the phase current and rotor position sensors, a sensorless method and a phase current reconstruction method can be simultaneously considered. However, an interaction between the two methods can be incurred when both methods inject voltage signals simultaneously. In this paper, a signal injection based sensorless method with the 120° OFF Discontinuous PWM (DPWM) is implemented in a TSSI to avoid this interaction problem. Since one leg does not have a switching event for one sampling period in the 120° OFF DPWM, the switching loss is altered according to the injection axis. The switching loss in the d-axis injection case can be up to 32% larger than that in the q-axis injection case. Other losses according to the injection axis are also analyzed.

치료기회상실로 인한 손해배상에 있어서 피침해법익 (Legal Interest in Damages Regarding Loss of Treatment Chance)

  • 엄복현
    • 의료법학
    • /
    • 제20권3호
    • /
    • pp.83-139
    • /
    • 2019
  • 의료과오에 의한 손해배상책임의 인정은 크게 두 가지 축을 기본으로 하여 전개되어 왔다. 첫째는 의사의 과실 있는 진료행위가 있고 이로 인하여 생명·신체 등의 법익이 침해당하고, 생명·신체 침해로부터 발생한 재산적·비재산적 손해에 대한 배상이 문제되는 경우이다. 둘째는 의사의 설명의무 위반이 있고 이로 인하여 자기결정권이 침해당하고, 자기결정권 침해로부터 발생한 비재산적 손해에 대한 배상이 문제되는 경우이다. 그러나 의료과오가 있더라도 환자의 기존상태 등으로 말미암아 의사의 과실 있는 진료행위와 법익침해 사이에 인과관계 증명이 곤란하여 의사의 손해배상책임이 부정되는 경우가 있다. 예를 들어, 환자가 이미 심한 말기암에 걸려있어서 의사로부터 적절한 치료를 받았더라도 완치되었을 가능성이 매우 낮은 경우를 생각해 보자. 이 때 의사의 과실이 없더라도 환자는 사망하였을 가능성이 매우 크다는 이유로 환자에게 어떠한 손해배상도 인정하지 않는 것은 타당하지 않다. 의사의 과실 있는 진료행위로 인하여 환자에게는 최소한 정신적 고통과 같은 비재산적 손해가 발생하였기 때문이다. 위와 같은 경우에 우리 법원은 예외적으로 적절한 치료를 받을 기회를 상실했음을 이유로 하여 위자료 배상을 인정해주고 있다. 그러나 이론적 체계가 정교하지 못하여 어떤 것을 보호법익으로 삼는지 명확하게 밝히지 못하고 있다. 의사의 과실 있는 진료행위와 생명·신체라는 법익의 침해 사이에 인과관계가 부정되더라도 새로운 보호법익을 설정하여 환자에게 발생한 손해를 배상해주려는 최근의 논의가 바로 '치료기회상실의 법리'이다. 이 보호법익의 내용이 무엇인지에 관하여 치유가능성론, 기대권침해론, 연명할 상당한 정도의 가능성 침해론, 치료기회상실론 등이 주장되고 있다. 이 보호법익의 내용은 치료기회상실론에 따라 '의료수준에 비추어 적절한 치료를 받을 이익'으로 보는 것이 타당하다. 환자의 위와 같은 이익은 어느 누구로부터 침해받거나 방해받아서는 안 되는 인간의 존엄한 가치임과 동시에, 생명에 관한 근원적인 욕구이며 법적으로 보호받아야 할 가치 있는 이익이라고 할 수 있다. 이런 측면에서 '의료수준에 적절한 치료를 받을 이익'은 정신적 법익에 관한 일반적 인격권의 하나로써 구체화될 수 있다.

탈립성(脱粒性), 단간종(短稈種)인 통일계품종(統一系品種)에 적합(適合)한 바인더의 개량(改良) 개발(開發)에 관(關)한 연구(硏究)(I) (Modification of the Existing Binders for Highly-Shattering, Short-Stem Rice Varieties (I))

  • 최희승;정창주
    • Journal of Biosystems Engineering
    • /
    • 제7권1호
    • /
    • pp.17-32
    • /
    • 1982
  • The binders introduced in Korea were originally designed to be used for Japonica-type varieties which have relatively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during binder operation. This study was intended to investigate analytically and experimentally the major sources of grain losses caused by three kinds of binders now introduced in Korea. Actual modification for each of three binders was done and experimentally compared to see if any improvement on grain loss was achieved. The results obtained in this study are summarized as follows; 1. It was required that the power transmission of binder should have a shifting mechanism so that velocities of pick-up and traveling units could be changed independently as desired according to the Japonica-type and Tongil varieties. In other words, the desired velocity of traveling unit should be obtained by shifting the transmission and the velocity of pick-up unit should be selected by reaping clutch according to the variety independent of the velocity of traveling unit as shown in Fig. 6. 2. To reduce grain loss it was desired that the moving parts of the pick-up unit should have the lowest possible velocities in harvesting Tongil varieties, unless the reduction of the speed be hindered the conveyance of the material. Based on the study, it was concluded that the velocities of pick-up unit be reduced by about 35% of those of the existing units. 3. It was found that the lug at the upper rotating section of pick-up case gave a severe impact on the ears of rice to increase grain loss. The optimum design of pick-up case to protect the ears from the protruding part of the lug was recommended by the result of analysis of the trajectory of the end-point of lug at the position. 4. It was proved analytically and experimentally that pick-up unit at the lower-rotating part was the other important source of grain loss in pick-up and divider assembly. In order to reduce a grain loss incurred by lugs at their lower-rotating section, it was suggested to improve it by (1) widening the space between right and left lower-rotating section, (2) shortening the length of lugs, (3) enlargement of the angle between the pick-up case and ground-level, and (4) attaching guard to right and left dividers so that the rotating lug could not give a high impact to the paddy hill. 5. Pick-up and divider assembly of the original binder of three models studied was modified according to the suggestions that were given by the preliminary study. Field test showed that the modified binders were able to reduce grain losses by about 0.4-0.7 percentage points compared to those without modification.

  • PDF

자탈형(自脱型) 콤바인의 배진손실(排塵損失)에 관(關)한 연구(硏究)(II) -품종(品種), 배진조절판(排塵調節板)의 위치, 작업속도(作業速度)가 배진손실량(排塵損失量)에 미치는 영향- (Chaff-outlet Grain Loss of Head-feed Combine -Changes in chaff-outlet gram loss on the variety, location of chaff-outlet loss control plate and traveling speed-)

  • 정창주;최중섭;최영수;정수일
    • Journal of Biosystems Engineering
    • /
    • 제15권4호
    • /
    • pp.310-318
    • /
    • 1990
  • The amount of grain loss incurred during harvesting operation through the chaff-outlet of combine may not be negligible. To minimize this grain loss and optimize condition of combining, it may be necessary that the amout of chaff-outlet loss dependent on varying crop condition is to be estimated as exactly as possible. This study was thus intended to develop the monitor that could indicate the amount of grain lost through the chaff-outlet of combine during haravesting operation, and to find out driving and operating method of combine that could reduce chaff-outlet loss. In the study(1), the frequency distributions of each sound generated by the impact of kernels and chaff, the sound generated by the impact of the mixture of kernels and chaff, and vibration or noise created by the combine engine and other moving parts were investigated experimentally. Based on the results of frequency analyses, the loss monitor was developed which could measure the impact sound of paddy kernels that could be distinguished from those of other threshing products through chaff-outlet, and from vibration or noise created by the combine engine and other moving parts. Also in this study, detecting capability of monitor was tested by comparing the amount of grain lost through chaff-outlet with the amount of grain detected by the loss monitor, and changes in chaff-outlet grain loss on the increase of traveling speed, location of chaff-outlet loss control plate and variety of paddy rice were measured using the loss monitor. The monitor developed in this study efficiently measured the amount of grain lost through the chaff-outlet of combine. It was found that the chaff-outlet grain loss ratio was affected greatly by the variety of paddy rice, the location of chaff-outlet loss control plate and traveling speed of combine.

  • PDF

미래손실에 기초한 통합공정관리계획 (An Integrated Process Control Scheme Based on the Future Loss)

  • 박창순;이재헌
    • 응용통계연구
    • /
    • 제21권2호
    • /
    • pp.247-264
    • /
    • 2008
  • 통합공정관리의 기본절차는 잡음이 내재하는 공정에 대하여 수정조치를 취하고, 수정활동 중 공정에 이상원인이 발생하면 관리도를 통하여 발생을 탐지하고 교정활동을 통하여 이를 제거하게 된다. 그러나 공정의 교정활동은 많은 시간과 비용을 수반하는 비생산적 요인을 유발할 수 있기 때문에 무조건적 교정활동은 생산성을 저하시키는 반대 급부도 동시에 내포하고 있다. 이 논문에서는 공정모형으로 ARIMA(0,1,1) 모형을 가정하고 공정 평균과 분산에 이상원인이 발생하는 경우 이를 탐지하는 절차를 소개하고, 이상신호의 시점에서 공정 잔여시간 동안 발생할 수 있는 미래손실에 기초하여 교정 활동의 여부를 판단하는 통합공정관리 절차를 제안한다.