• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.72-78
• /
• 2011

Currently, for the damper case, the material produced by cast/forge welding is mechanically processed and then the final product is mass-produced. By cutting the cast/forge welded material, the issues of excessive cutting time, multiple process production, and a large amount of chips (40% loss from the original material) arise, causing increased production cost and reduced profitability. Thus, in this study, the incremental forming technology which generates no chips was applied in production. Analysis was excuted for 1st and 2nd works by change of tool diameter and working tool. For this, 3D molding and analysis were executed, which was applied to the processing the result, successful processing could be achieved through a few trials of molding processing according to tool forming and rotation counts.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.249-255
• /
• 2010

This paper studies the relationship between learning orientation and incremental innovation(process innovation, operational innovation, and service innovation), and the moderating effect of tenure in tele-communication service sector. Based on the responses from 241 employees, the results of multiple regression analysis show that learning orientation have positive relationships with process innovation, operational innovation, and service innovation. The results of moderating analysis showed that longer tenure employees have more positive relationships with all incremental innovation factors(process innovation, operational innovation, and service innovation) than short tenure employees.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.66-72
• /
• 2014

Incremental forming is a relatively novel sheet forming process, in which parts can be formed without the use of dedicated dies. In this paper, the influence of the process parameters (tool diameter, step size, feed rate, existence of a die, forming methods, and kinds of tool path) on surface roughness in the case in which parts are processed by incremental forming was discussed. Al 1050 material is used in the experiments. A table of orthogonal arrays is used to design the experiments and the ANOVA method is employed to statistically analyze the results. The obtained results show that the process parameters of tool diameter, step size, and the existence of a die have a significant effect on the surface roughness, whereas the feed rate, forming methods and kinds of tool path are insignificant.

• Journal of Internet Computing and Services
• /
• v.7 no.4
• /
• pp.91-99
• /
• 2006

The incremental parsing technique plays an important role in language-based environment which allows the incremental construction of a program. It improves the performance of a system by reanalyzing only the changed part of a program. The conventional incremental parsing uses the stack data structure in order to store the parsing information. In this paper, we suggest a threaded tree construction algorithm which parse by adding the threaded node address instead of using a stack data structure. We also suggest an incremental threaded tree construction which has incremental parsing process of five steps using the constructed threaded tree.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.147-157
• /
• 2009

This paper is to test the modulating effect of organizational culture on the relationship between personality and incremental innovation, and study of the relationship between incremental innovation and service Quality in service industry. Based on 507 data gathered in service companies in Korea, analysis results and showed that procedural, interactional, and innovative culture have affirmative relation with incremental innovation. Therefore innovative culture appeared to have some modulating effect on the relationship between personality and incremental innovation. And ana-lysis results of relationship between incremental innovation and service quality are followed; service innovation and process innovations showed positive effects except some operation innovations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.800-807
• /
• 2006

To enhance the conversion speed more fast, we separate the determination process of MSB and LSB with the two independent ADC circuits of the Incremental Sigma Delta ADC. After the 1st Incremental Sigma Delta ADC conversion finished, the 2nd Incremental Sigma Delta ADC conversion start while the 1st Incremental Sigma Delta ADC work on the next input. By determining the MSB and the LSB independently, the ADC conversion speed is improved by two times better than the conventional Extended Counting Incremental Sigma Delta ADC. In processing the 2nd Incremental Sigma Delta ADC, the inverting sample/hold circuit inverts the input the 2nd Incremental Sigma Delta ADC, which is the output of switched capacitor integrator within the 1st Incremental Sigma Delta ADC block. The increased active area is relatively small by the added analog circuit, because the digital circuit area is more large than analog. In this paper, a 14 bit Extended Counting Incremental Sigma-Delta ADC is implemented in $0.25{\mu}m$ CMOS process with a single 2.5 V supply voltage. The conversion speed is about 150 Ksamples/sec at a clock rate of 25 MHz. The 1 MSB is 0.02 V. The active area is $0.50\;x\;0.35mm^{2}$. The averaged power consumption is 1.7 mW.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.8-20
• /
• 2022

The paint removal of fighter jets is just as important as the painting, because perfect paint removal ensures the quality of the exterior painting on the aircraft. However, the current conditions for paint removal work of the ROKAF's are poor. It is identified that the painting process currently implemented by the ROKAF is not only exposed to harmful compounds such as harmful dust and hexavalent chromium, but also consumes a lot of water. Thus, the introduction of advanced facility is considered. This study compares the fighter jets painting removal process currently applied by the Korean Air Force with the improved laser coating removal process of the US Air Force, and conducts an incremental analysis to perform economic analysis for the introduction of advanced facility. Four scenarios were envisioned on the premise of an increase in the number of fighters in the future, incremental analysis shows that laser coating removal method is advantageous in all scenarios. In addition, it is recommended that paint removal cycle keeps the current 12-year and the outsourcing amount to civilian depot is reduced.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.7
• /
• pp.1685-1696
• /
• 1994

In this paper, a new forming process of the large-size forgings within the limit of forming loads is developed by introducing the incremental forging method and combined forming method. For the development of the forming process, various related processes are proposed and modelling experiments of plasticine and corresponding numerical simulation ate carried out. Thus, an optimal process considering the productivity and economical efficiency is recommended from the study of formability and forming loads, etc. The selected process is subjected to a modelling experiment of lead and 1/7 scale prototype experiment of the real material so as to verify the effectiveness of a selected process as well as to determine the design parameters. The developed process is then applied the forging product of dome shape. Dome-shaped forgings can be produced by the developed process within the limit loads and with the simple tools.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.400-403
• /
• 2008

For the effective manufacture of doubly curved metal plates, a line array roll set (LARS) process is proposed. The suggested process utilizes a pair of upper and lower symmetric roll assemblies. In the process, the initial plate is progressed into the final shape in a stepwise or pathwise manner according to the basic principle of the incremental forming process. The deformation proceeds simultaneously in the longitudinal and transverse directions. Moreover, there is a close correlation between the deformation in the longitudinal direction and that in the transverse direction of the plates. Therefore, the finally formed shape in the incremental forming process is strongly dependent upon process conditions, such as the forming path and the forming increment. The manufacturing of arbitrary doubly curved plates with various curvatures is not an easy task because of such complicated behaviors of the plate; thus, the forming schedules for the desired shape should be carefully and accurately designed. In this study, several experiments with the LARS system were carried out for the fundamental investigation on process design for manufacturing of doubly curved plates.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.349-353
• /
• 2008

A fundamental study on warm incremental forming of a magnesium alloy sheet has been carried out. In order to enhance the incremental formability of the magnesium alloy sheet, a local heating device was newly designed and manufactured. Through the incremental forming tests of AZ31 under various forming conditions, the effects of process parameters such as the temperature, feeding depth per cycle, and inclination angle on the incremental formability of AZ31 were investigated. In addition, conventional FLDs at elevated temperatures were constructed experimentally and applied to predict the forming failure.