• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.181-188
• /
• 2016

This paper demonstrates that centralized economic load dispatch optimization is much more economical than independent optimization carried out by individual power generating companies. The algorithm applied here optimizes by balancing the generation power at the valve-point, then readjusting generation power by comparing incremental operating cost incurred by marginal increase in the generation power and decremental operating cost likewise incurred by marginal decrease in the generation power. Upon comparing 3 individual optimization cases of 10, 13, and 40 generators respectively with centralized optimization of 63 generators, centralized operation for economic load dispatch optimization has proven to maximize economic benefits by markedly reducing operation costs of individual optimization.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.90-100
• /
• 2014

Position estimation that uses only active phase voltage and current is presented, to perform high accuracy position sensorless control of a SRM drive. By extracting the amplitude of the first switching harmonic terms of phase voltage and current for a PWM period through Fast Fourier Transform (FFT), the flux-linkage and position are estimated without external hardware circuitry, such as a modulator and demodulator, which result in increased cost, as well as large position estimation error, produced when the motional back EMF is ignored near zero speed. A two-phase SRM drive system, consisting of an asymmetrical converter and a conventional closed-loop PI current controller, is utilized to validate the performance of the proposed position estimation scheme in comprehensive operating conditions. It is shown that the estimated values very closely track the actual values, in dynamic simulations and experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1075-1082
• /
• 2010

This paper analyzes a operating characteristic for maximum power point tracking (MPPT) of photovoltaic generation system. MPPT methods are used to maximize PV array output power by tracking maximum power point(MPP) continuously. To increase the output efficiency of PV system, it is important to have more efficient MPPT. MPPT algorithm is widely used the control method such as the perturbation and observation(PO) method, incremental conductance(IC) method and constant voltage(CV) method. In case of the radiation is changed, this paper proposes a response characteristic with MPPT control algorithms. Also, it proposes the direct for a novel MPPT control algorithm development through the analyzed data, hereby proves the effectiveness of this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.11
• /
• pp.20-26
• /
• 2013

This paper proposes the maximum power point tracking(MPPT) control of photovoltaic system using fuzzy based variable step size perturbation & observation(FVSS-PO) method. Conventional PO and incremental conductance(IC)MPPT control algorithm generally uses fixed step size. A small fixed step size will cause the tracking speed to decrease and tracking accuracy of the MPP will decrease due to large fixed step size. Therefore, the fixed step size can't be satisfying both the tracking speed and the tracking accuracy. This paper proposes FVSS-PO MPPT algorithm that adjusts automatically step size of PO by fuzzy control according to operating conditions. The validity of MPPT algorithm proposed in this paper prove through compare with conventional PO MPPT algorithm.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.197-205
• /
• 1994

Security of a power system refers to its robustness relative to a set of imminent disturbances (contingencies) during operation. The socially optimal solution for the actuall level of generation/consumption has been well-known spot pricing at shot-run marginal cost. The main disadvantage of this approach arises because serious contingencies occur quite infrequently. Thus by establishing contractual obligations for contingency offering before an actual operation time through decision feedback we can obtain socially optimal level of system security. Under probabilistic precontract pricing the operating point is established at equal incremental cost of the expected short-run and collapse cost of each participant. Rates for power generation/consumption and for an offer to use during a contingency, as well as information on the probability distribution of contingency need for each participant, are derived so that individual optimization will lead to the socially optimal solution in which system security is optimized and the aggregate benefit is maxmized.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.552-557
• /
• 2003

This paper presents an algorithm for evaluating power wheeling effects considering contingency using Monte-Carlo simulation. The effects of power wheeling on generating cost, transmission losses, and system security are considered. And, for a specific operating condition, the effects are quantified by the sensitivity of specific quantities of interest with respect to wheeling level. This model is utilized to calculate probability distribution functions of the incremental effects of power wheeling with a Monte-Carlo simulation. The proposed method is applied to IEEE RTS-96 system and the results are presented.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.93-100
• /
• 2006

This paper is concerned with the dynamic analysis of an underwater tracked vehicle, operating on extremely soft soil of the deep-seafloor. The vehicle is assumed as a rigid-body with 6-dof. The orientation of the vehicle is defined by four Euler parameters. To solve the motion equations of the vehicle, the Newmark numerical integrator is used in the incremental-iterative algorithm. The normalization constraint of Euler parameters is satisfied by using of a sequential updating method. The hydrodynamic force and moment are included in the tracked vehicle's dynamics. The hydrodynamic effects on the performance of tracked vehicles are investigated through numerical simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.162.5-162
• /
• 2001

This paper presents a indirect vector control system for induction motors using an adaptive fuzzy logic(AFL) speed estimator. The proposed speed estimator is based on the MRAS(Mode Referece Adaptive System) scheme. In general, the MRAS speed estimation approaches are more simple than any other strategies. However, there are some difficulties in the scheme, which are strong sensitivity to the motor parameters variations and necessity to detune the estimator gains caused by different speed area. In this paper, the AFL speed estimator is proposed to solve the problems. The structure of the proposed AFL is very simple. The input of the AFL is the rotor flux error difference between reference and adjustable model, and the output is the estimated incremental rotor speed. Moreover, the back propagation algorithm is combined to adjust the parameters of the fuzzy logic to the most appropriate values during the operating the system. Finally, the validity of the ...

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.373-379
• /
• 2000

This paper deals with the study of distributed design system and the implementation of JAVA based initial design system using CORBA/sup [1-3]/. In the state of initial design, designer should consider other information related to a design part. In this case, designer has a difficult problem to search and calculate distributed data. We propose a special connector named ‘Allocator’and implement an initial design system AIDS(Agent based Initial Design system). AIDS can help designer search and calculate the distributed information. In this study, JAVA and CORBA were chosen for handling network and distribute programming. AIDS focuses on the possibility of incremental concurrent design capability. AIDS is comported of Request-Agent, Calculator-Agent, View-Agent, Search-Agent, and ‘Allocator’. The proposed system can be used for designing initial design of a gripper in the web regardless of operating system.

• International Journal of Railway
• /
• v.4 no.3
• /
• pp.70-73
• /
• 2011

Controlling the exterior and interior noise emission has become an important issue in the research and development of high speed trains. As the operating speed of the train increases, the noise emission characteristics are expected to deviate from that of the existing trains due to several changes in the basic train layout. For train speed in excess of 350 km/h in particular, the aerodynamic noise component starts to exceed the structure-borne noise component, and even an incremental speed increase is accompanied by a rapid elevation in the noise level. The present study presents an engineering approach for predicting the aerodynamic noise level at the design stage for high speed trains. The experimental noise measurements from test run of Korean high speed train under development are presented as a partial validation of the proposed approach. While the overall aerodynamic noise can be cast in a single power law relationship against the train speed, different parts of the train show power law relationships unique to each component.