• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.492-497
• /
• 2015

Currently, there are many kinds of tracked armored vehicles in service and they have encountered various environment and situations. So there are many obstacles to operate them improperly such as an engine stall. The causes of engine stall are an insufficient fueling, a mixture of air-fuel or vapor lock, and load increment which results from a rapid steering or increasing a viscosity of lubricant by low temperature. In this paper, engine stall by load increment due to a rapid steering or increasing of lubricant viscosity on tracked armored vehicles is analyzed, the ways to prevent it are applied, and their degrees of improvement are evaluated.

• Structural Engineering and Mechanics
• /
• 제25권1호
• /
• pp.53-73
• /
• 2007

In this study, an effective load increment method for multi modal adaptive non-linear static (pushover) analysis (NSA) for building type structures is presented. In the method, lumped plastisicity approach is adopted and geometrical non-linearties (second-order effects) are included. Non-linear yield conditions of column elements and geometrical non-linearity effects between successive plastic sections are linearized. Thus, load increment needed for formation of plastic sections can be determined directly (without applying iteration or step-by-step techniques) by using linearized yield conditions. After formation of each plastic section, the higher mode effects are considered by utilizing the essentials of traditional response spectrum analysis at linearized regions between plastic sections. Changing dynamic properties due to plastification in the system are used on the calculation of modal lateral loads. Thus, the effects of stiffness changes and local mechanism at the system on lateral load distribution are included. By using the proposed method, solution can be obtained effectively for multi-mode whereby the properties change due to plastifications in the system. In the study, a new procedure for determination of modal lateral loads is also proposed. In order to evaluate the proposed method, a 20 story RC frame building is analyzed and compared with Non-linear Dynamic Analysis (NDA) results and FEMA 356 Non-linear Static Analysis (NSA) procedures using fixed loads distributions (first mode, SRSS and uniform distribution) in terms of different parameters. Second-order effects on response quantities and periods are also investigated. When the NDA results are taken as reference, it is seen that proposed method yield generally better results than all FEMA 356 procedures for all investigated response quantities.

• Journal of Nutrition and Health
• /
• 제35권1호
• /
• pp.69-77
• /
• 2002

The purpose of this study was to determine the probability of overweight throughout childhood in relation to the presence of overweight at birch or in early childhood, and presence of overweight in children's parents. Weight and height measures were collected at birth and at ages of 7, 10, 12 years from 655 6th grade primary schoolchildren. Childhood overweight was defined as a body mass index at or above the 85th percentile for age and sex, and overweight in children's parents as a body mass index at or above 27. The prevalence of overweight increased with age of the children. Overweight at birth was not associated with overweight at 12 years of ages. However, overweight at 12 years old was already related to overweight at 7 years old. In comparison to non-overweight peers, overweight children at ages 7(OR = 7.64, 95% CI = 4.32-13.51) and 10 years(OR = 19.69, 95% CI = 11.42-33.94) had a higher rick of becoming overweight at 12 years of age. Among children who was overweight at age 7years, 60.7% remained overweight 5 years later, Yearly increment in BMI of overweight children was larger than that of non-obese children (1.15-1.65kg/m$^2$vs 0.50-0.71kg/m$^2$. As compared with the lower case in mealy increment of BMI, the probability of being overweight at age of 12 years was greater in higher case. BMI values at age 7years were positively correlated with BMI values at age of 10 and 127ear,i, and with annual increments in BMI. But those relationships with birth weight were not observed. Children were at greater risk for overweight if at least ogle parent was overweight. The odds ratio for child overweight associated with maternal overweight was 2.41(95% CI = 1,13-5.IS), and those associated with paternal overweight 1.70(95% CI = 0.92-3.17). And parents' BMIs were positively correlated with children's BMI values and yearly BMI increment. In conclusion, overweight at early childhood and annual inclement in BMI can be important in predicting the prevalence of overweight and the risk that overweight will remain after 7 years of age. The risk of being overweight throughout the childhood increases by the parents'overweight.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1325-1332
• /
• 2010

미세증가감수지수 검사는 감각신경성난청의 세부 병변을 감별하기 위하여 사용되는 누가현상을 판별하는 검사이다. 본 논문은 PC 기반 소프트웨어로 구현한 미세증가감수지수 검사 소프트웨어를 기술한다. 구현된 소프트웨어는 검사자의 검사 참여 유 무에 따라 수동 검사와 자동 검사의 두 가지 모드를 제공함으로써 경제적인 검사가 진행 될 수 있게 한다. 또 필요할 경우에 자동으로 차폐를 수행한다. 그리고 1dB의 순간 상승음에 대한 검사뿐만 아니라 2dB와 5dB 상승음에 대한 검사도 지원함으로써 보다 정확한 검사 결과를 얻을 수 있도록 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제21권4호
• /
• pp.709-717
• /
• 2010

연관성 규칙 마이닝은 각 항목들 간의 관련성을 찾아내는 데 활용되며, 지지도, 신뢰도, 향상도 등의 연관성 측도를 기반으로 두 항목간의 관계를 수치화함으로써 의미 있는 규칙을 찾아낸다. 본 논문에서는 조건부 확률 증분비를 이용한 연관성 순위 결정 함수를 제안하고자 한다. 특히 항목 집합간의 고유한 연관성 정도를 제대로 반영하기 위해 조건부 확률 증분비를 이용하여 연관성 순위 결정 함수를 제안하여 3개의 연관기준값들 중 어느 하나라도 기준 이상이 되는 규칙의 순위를 매겨 필요한 연관성 규칙만을 생성할 수 있도록 한다. 모의실험을 해본 결과, 본 논문에서 제안한 함수는 기존의 함수와는 달리 특정 연관 기준값의 영향을 받지 않으며, 최저 연관성 기준값들의 범위와는 관계없이 항상 -1과 1 사이의 값을 가진다는 사실을 확인할 수 있었다. 또한 조건부 확률 증분비를 이용한 연관순위결정 함수는 대체적으로 연관성 측도들과 최저 연관기준값들간의 차이를 잘 반영하고 있는 것으로 나타났다.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.621-629
• /
• 1992

본 연구에서는 Kelvin의 기본해와 초기응력 증분에 의해 정식화된 경계적분방 정식을 이용하여 점차적으로 외력을 증가시켰을 때, 선형등방경화재에 국부적으로 생 기는 항복영역과 항복하중, 탄소성 응력해석등을 재료비선형문제로 해석하였다. 이 때 초기응력 증분을 결정함에 있어서 종래에는 등가 소성변형률을 수렴판정으로 해석 하였지만, 이는 구분적인 선형 경화재와 온도 의존성 문제에는 적당하지 않으므로 암 기용일등은 등가응력과 응력-변형률 선도를 이용하여 수렴판정을 하였다. 그러나 이 방법은 소성역에서의 기울기가 변화하는 곳에서는 피할 수 없는 오차가 존재한다. 따라서 여기에서는 계산된 초기응력 증분에 의한 초기 탄성변형률에너지 증분과 응력 -변형률선도로 부터 구해지는 초기 탄성변형률에너지 증분을 이용한 수렴판정으로 초 기응력증분을 결정하였다. 또한, 내부영역적분을 일부 해석적인 적분과 수치적분을 병행한 경우와 전부 수치적분방법으로 내압을 받는 실린더와 단순 인장하중이 작용하 는 양편 Ⅴ형 노치를 갖는 박판의 경우에 적용하여 해석하였으며, 그 결과를 유한요소 법 프로그램인 NISA(numerically integrated elements for system analysis)로 구한 결과치와 비교, 고찰하였다.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• 한국운동역학회지
• /
• 제29권4호
• /
• pp.247-254
• /
• 2019

Objective: The goal of this study was to determine the center of pressure (CoP) complexity pattern in approximate entropy technique between genders at different conditions of running speed. Background: It is conducted to evaluate the complexity pattern of CoP in the increment of running speed to have insights to injury prediction, stability, and auxiliary aids for the foot. Method: Twenty men (age=22.3±1.5 yrs.; height=176.4±5.4 cm; body weight=73.9±8.2 kg) and Twenty women (age=20.8±1.2 yrs.; height=162.8±5.2 cm; body weight=55.0±6.3 kg) with heel strike pattern were recruited for the study. While they were running at 2.22, 3.33, 4.44 m/s speed on a treadmill (instrumented dual belt treadmills, USA) with a force plate, CoP data were collected for the 10 strides. The complexity pattern of the CoP was analyzed using the ApEn technique. Results: The ApEn of the medial-lateral and antero-posterior CoP in the increment of running speed showed significantly difference within genders (p<.05), but there were not statistically significant between genders at all conditions of running speed. Conclusion: Based on the results of this study, CoP complexity pattern in the increment of running speed was limited to be characterized between genders as an indicator to judge the potential injury and stability. Application: In future studies, it is needed to investigate the cause of change for complexity of CoP at various running speed related to this study.

• 중소기업융합학회논문지
• /
• 제1권1호
• /
• pp.67-73
• /
• 2011

속 이동 통신 서비스에서의 핸드오버, 특히 Mobile WiMAX는 120km/h의 속도에서도 이동성을 효과적으로 지원한다. 하지만 한 셀 안에서 증가하는 사용자의 수를 수용하기 위해 무선 네트워크의 각 셀의 크기를 줄임으로써 대역폭을 할당하는 방법으로 마이크로셀, 피코셀이 점점 늘어나고 있다. 이러한 결과로 핸드오버가 발생하게 되고, 그에 따라 연결 실패 비율이 증가하였다. IEEE 802.16 표준안에서는 핸드오버 최적화 기법을 통해 Seamless 한 연결성을 제공하지만 인증절차를 생략함으로써 네트워크 취약성이 노출되었다. 본 논문은 VoIP, 화상통신, Streaming Data Service 같은 실시간서비스를 지원하면서 보안성이 우수한 부분암호화 방식의 핸드오버를 제안한다. 평가결과, 제안 기법은 기존 방법에 비해 처리시간이 20%이상 향상됨을 입증하였다.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.51-58
• /
• 2002

The goal of this research was to an optimum conditions for the brown rice conditioning from data of milling characteristics after conditioning of the brown rice. The range of the initial moisture content of the sample was 13%, 14%, and 15%, the range of the increment of the moisture content was 0.4% and 0.8% with respect to the initial moisture content, and a ripe time after conditioning was eight hours. The results obtained from this research can be summarized as fellows. 1 The crack ratio after conditioning the brown rice with the initial moisture content was increased as the initial moisture content decreased and increment of the moisture content increased. The crack ratio of the milled rice was increased than that of the non-conditioned brown rice and decreased with the conditioned brown rice with the increment of the moisture content of 0.4% and 0.5%. 2. The broken rice ratio after conditioning the brown rice with the initial moisture content was a little higher than that of the non-conditioned brawn rice. The broken ratio of the conditioned brown rice with the increment of the moisture content of 0.4% was increased around 0.2∼0.4% with respect to the non-conditioned brown riced and the broken ratio of the brown rice was high with increased amount of water sprayed during conditioning process. 3. The moisture content of the milled rice after conditioning the brown rice with the initial moisture content increased around 0.3∼0.8% with respect to the non-conditioned milled rice. 4. The electric energy consumption on milling process with the conditioned brown rice by the initial moisture content was decreased 3.4∼39.1% with respect to the non-conditioned brown rice.