• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.332-341
• /
• 2020

High-speed turbomachinery implements gas foil bearings (GFBs) due to their distinctive advantages, such as high efficiency, lesser part count, and lower weight. This paper provides the test results of the static structural stiffnesses and loss factors of bump-type foil thrust bearings with increasing preload and bearing deflection. The focus of the current work is to experimentally quantify variability in structural stiffnesses and loss factors among the four test thrust bearings with identical design values and material of the bump and top foil geometries using the same (open-source) fabrication method. A simple test setup, using a rigidly mounted non-rotating shaft and thrust disk, measures the bearing bump deflections with increasing static loads on the test bearing. The inner and outer diameters of the test bearings are 41 mm and 81 mm, respectively. The loss factor, best-representing energy dissipation in the test bearings, is estimated from the area inside the local hysteresis loop of the load versus the bearing deflection curve. The measurements show that structural stiffnesses and loss factors of the test bearings significantly rely on applied preloads and bearing deflections. Local structural stiffnesses of the test bearings increase with applied preloads but decrease with bearing deflections. Changes of loss factors are less sensitive to applied preloads and bearing deflections compared to those of structural stiffnesses. Up to 35% variability in static load structural stiffnesses is found between bearings, while up to 30% variability in loss factors is found between bearings.

• Journal of Korea Trade
• /
• v.26 no.5
• /
• pp.106-124
• /
• 2022

Purpose - The increasing share of Korean private label products (PLPs) in the domestic market helped generate lucrative revenue. In recent years, major South Korean retailers have begun to cast their sights on overseas markets and actively export their PLPs. In China, the proportion of private label fresh food (PLFF) is gradually expanding amid the development of the new retailing model. A profound understanding of the relationship between private label fresh produce and purchase intention may be the answer to helping Chinese retailer private labels expand supply chains in Korea. This study, taking Chinese retailers as an example, examines the impacts of selection factors of private label fresh food and perceived value on purchase intention. Apart from that, the relationship between the selection factors and purchase intention will be analyzed with perceived value as a mediator. Design/methodology - This work aims to empirically analyze the purchase intention of private label fresh food using statistical analysis. In this study, a hypothetical causal model consisting of 6 latent variables and 24 measured variables is developed based on the literature review. To validate the research hypotheses and the research model, SPSS23.0/AMOS23.0 is used to analyze factors such as validity and reliability, as well as structural equation modeling. Findings - The hypothetical model established in this study is of general applicability. In respect to PLFF, perceived value, while significantly influencing purchase intention in combination with four selection factors (perceived quality, perceived price, brand trust, and store image), mediates partially between the first three factors and purchase intention, which rules out the impact and mediating effect of store image on purchase intention. Originality/value - These research results, as helpful insights into the present circumstances of Chinese PLFF in the domestic market, provide useful information and guidance for Korean retailers and service providers to innovate production and service, as well as develop marketing and promotion strategies, so that they can shift private label goods with advantages from domestic demand to export, thus increasing overseas profitability. Further, this work will also contribute to relevant research.

• Korean Journal of Child Studies
• /
• v.28 no.6
• /
• pp.85-101
• /
• 2007

The subjects for this study on delinquent behavior, substance use and risk/protective factors consisted of 301 Korean-American students in grades 6 to 12. Findings were that (1) the delinquent behavior rate of adolescents using alcohol, tobacco or other substances was higher than that of non-using adolescents, increasing the odds of delinquent behavior from 3 to 45 times. (2) The probability of delinquents in the substance users group was higher by 7 to 44 times than in the non-users group. (3) The relationship with delinquent behavior of risk factors and substance use was much stronger than the relationship with delinquent behavior of protective factors and substance use. (4) The strongest predictor of delinquent behavior or substance use was the peer-individual domain.

• Culinary science and hospitality research
• /
• v.14 no.4
• /
• pp.398-414
• /
• 2008

The purpose of this study is to analyze the effect of restaurant atmosphere on its image and customers' emotional responses and behavior. The results of this study indicated that perceived restaurant atmospheres had a significant effect on customers' emotional responses, and these emotional responses greatly influenced the image of a restaurant. Especially, the ambient and cleanliness factors of restaurant atmosphere influenced a restaurant image, and the positive image from those factors had a significant effect on customer behavior. The design and human factors of restaurant atmosphere influenced customer behavior, and the positive image from those factors had a significant effect on customer behavior. Finally, it was verified that the restaurant atmospheric factors affected its image and customers' emotional responses and behavior. Moreover, the better the restaurant atmospheric factors(design, ambient, cleanliness, humanity) are, the better customers' emotional responses and image are, thereby increasing customers' revisiting and word-of-mouth intention.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.63-72
• /
• 1999

Many firms have applied flexible manufacturing systems as a means of increasing productivity, profitability, and quality. Therefore, the purpose of this paper is to develop the more efficient justification model through an analytical scoring model with the quantitative factors, flexibility factors, and safety factors under uncertainty. In this paper, the three factors for properly comparing and evaluating of flexible manufacturing systems are presented. Especially, this paper has emphasized the flexibility and safety factor; the one consists of organization assessment, process treatment function, products and products quantity, useful life assesment, and software function, the other presents risk assesment, Y2K problem, safety device analysis, total productive management system, safety management. Finally, a normalized scoring model by the new flexibility and safety factors can be used in real fields for flexible manufacturing systems project selection under uncertainty.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.9
• /
• pp.1303-1313
• /
• 2017

Objective: This study evaluated the change and function of the pancreas, and small intestine in relation to growth performance of broilers on diets supplemented with raw soybean meal (RSBM) and protease. Samples of test ingredients and diets, after mixing and prior to being used were also assessed on contents of anti-nutritional factors. Methods: A $3{\times}3$ factorial study was used, with three levels of RSBM (commercial soybean meal [SBM] was replaced by RSBM at 0, 10%, or 20%) and protease (0.1, 0.2, or 0.3 g/kg). Each treatment was replicated six times with nine birds per replicate. Birds were housed in cages, in climate-controlled room and fed starter, grower and finisher diets. Results: Levels of trypsin inhibitors in the diets, containing varying levels of RSBM ranged between 1,730.5 and 9,913.2 trypsin inhibitor units/g DM. Neither RSBM nor protease supplementation in diets significantly affected (p>0.05) the body weight of broilers in the entire periods (0 to 35-d). Increasing the level of RSBM in diets increased the weight of the pancreas at d 10 (p<0.000), d 24 (p<0.001), and d 35 (p<0.05). Increasing levels of RSBM in the diets reduced the apparent ileal digestibility of crude protein (CP), and amino acid (AA) at d 24. Increasing level of RSBM in the diets decreased (p<0.01) pancreatic protein content, but this was increased (p<0.05) when protease was added to the diets (0 to 10-d). Increasing the level of protease improved the pancreatic digestive enzymes, including trypsin (p<0.05), chymotrypsin (p<0.01), and general proteolytic enzymes (p<0.05). Conclusion: The commercial SBM could be replaced at up to 20% by RSBM for broilers. Although protease supplementation slightly improved the digestive enzymes, and the ileal digestibilities of CP and AA, the CP and AA were negatively affected by increasing RSBM.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.39-45
• /
• 2014

Dust is mostly caused by human activity. The effect of natural factors on dust emission were studied in many research, but the little effort in researching artificial factors of dust emission. The object of study is to analysis dust emission characteristic by drop impact. Particle matter $10{\mu}m$ ($PM_{10}$) was measured by drop impact on paved soil with changing drop height, weight and drop size. Increasing drop height cause more $PM_{10}$ emission. Increasing drop weight cause more $PM_{10}$ emission but had limit weight for increasing dust emission. Because the exceed kinetic energy of drop weight penetrate the soil surface. The limit perimeter was exist that separating $PM_{10}$ emission aspect. Under limit perimeter, $PM_{10}$ emission was increasing while perimeter was increasing, but over limit perimeter showed the opposite aspect. Regression equations for estimating $PM_{10}$ with kinetic energy and perimeter were made under limit perimeter and over limit perimeter. The $R^2$ of those equations were 0.784, 0.743. The error has occurred between measured $PM_{10}$ and calculated $PM_{10}$ in the equation under limit perimeter. But using equation of case for over limit perimeter, PM10 can be estimated with kinetic energy and drop perimeter.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1409-1413
• /
• 2015

Background: According to increase in elderly populations, and change in lifestyle and cancer-causing behavior, the global burden of cancer is increasing. For prevention and control of disease, knowledge of population statistics of cancers and their trends is essential. This study aimed to investigate the epidemiology and trends of cancer in the province of Kerman: southeast of Iran. Materials and Methods: This analytical and cross-sectional study was carried out based on cancer registry data at the Disease Management Center of the Health Ministry from 2004 to 2009 in the province of Kerman in Iran. Common cancers were defined as the number of reported cases and standardized incidence rates. To compute the annual percentage change (APC), joinpoint 4.1.1.1 software was applied. Results: Of 10,595 registered cases, 45.3% (4802 cases) were in women and 56.7% (5,793 cases) occurred in men. The standardized incidence rates for both females and males were increasing during the six years studied. The most common cancers in both sexes during six years of studied were skin (13.4%), breast (9.35%), bladder (7.8%), stomach (7.45%), leukemia (7.05%), colorectal(5.57%), lung(4.92%), trachea(3.51%) and prostate(2.48%). Conclusions: Our findings revealed that the cancer incidence is demonstrating increasing trends in both sexes in the province of Kerman. This may be because of changes in lifestyle, increasing exposure to risk factors for cancer and increase of life expectancy. If this is the case, increasing public awareness of cancer risk factors is a high priority, together with introduction of large-scale screening techniques.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.104-109
• /
• 2010

The fatality of pedestrian accounts for about 21.2% of all fatality at 2007 year in Korea. In car to pedestrian accident it is very important to inspect the throw distance of pedestrian after collision for exact reconstructing of the accident. The variables that influence on the throw distance of pedestrian can be classified into the factors of vehicle and pedestrian, and road condition. It was simulated by PC-CRASH, a kinetic analysis program for a traffic accident in sedan type vehicle and SPSS program was used for regression analysis. From the results, the throw distance of pedestrian increased with the increasing of vehicle velocity, and decreased with the increasing of impact offset. Also it decreased with the increasing of velocity of pedestrian at accident, and throw distance at the road condition of wet was longer than that at dry condition. Finally, the regression model of sedan type vehicle on the throw distance of pedestrian was as follows; $$dist_i=2.39-0.11offset_i+0.59speed_i-545height_i-0.25walk_i+2.78wet_i+{\epsilon}_i$$.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.76-81
• /
• 2009

The fatalities of pedestrian account for about 21.2% of all fatalities at 2007 year in Korea. To reconstruct exactly the accident, it is important to calculate the throw distance of pedestrian in car to pedestrian accident. The frontal shape of SUV vehicle is dissimilar to passenger car and bus, so the trajectory and throw distance of pedestrian by SUV vehicle is not the same of passenger car and bus. The influencing on it can be classified into the factors of vehicle and pedestrian, and road factor. It was analyzed by PC-CRASH for simulation, and SPSS s/w was used for regression analysis. From the simulation results, the maximum impact energy of multi-body of pedestrian was occurred to that of torso body at the same time. And the throw distance increased with the increasing of impact velocity, and decreased with the increasing of impact offset. Also it decreased with the increasing of velocity of pedestrian at accident, and the throw distance of wet road was longer than that of dry road. Finally, the regression analysis model of SUV(Nissan Pathfinder type)vehicle in car to pedestrian accident was as follows; $$disti_i=-0.87-0.11offseti_i+0.69speed_i-4.27height_i+0.004walk_i+0.63wet_i+{\epsilon}_i$$.