• Journal of Hydrogen and New Energy
• /
• v.20 no.6
• /
• pp.499-504
• /
• 2009

The effect of gas diffusion layer (GDL) compression caused by different stack clamping pressures on fuel cell performance was experimentally studied in a miniature 5-cell proton exchange membrane fuel cell (PEMFC) stack. Three stacks with different GDL compressions, 15%, 35% and 50%, were prepared using SGL 10BC carbon fiber felt GDL and Gore 57 series MEA. The PEMFC stack performance and the stack stability were enhanced with increasing stack clamping pressure resulting in the best performance and stability for the stack with higher GDL compressions up to 50%. The excellent performance of the stack with high GDL compression was mainly due to the reduced contact resistance between GDL and bipolar plate in the stack, while reduced gas permeability of the excessively compressed GDL in the stack hardly affected the stack performance. The high stack clamping pressure also resulted in excessive GDL compression under the rib areas of bipolar plate and large GDL intrusion into the channels of the plate, which reduced the by-pass flow in the channels and increase gas pressure drop in the stack. It seems that these phenomena in the highly compressed stack enhance the water management in the stack and lead to the high stack stability.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.660-669
• /
• 2018

Domestic automotive shredder residue (ASR) recycling facilities must comply with 60% of the energy recovery criteria calculated by the waste control act, based on resource circulation of electrical and electronic equipment and vehicles. The method of calculating energy recovery criteria was newly enacted on November 6, 2017, and it has been judged that it is necessary to consider applicability. In this study, the energy recovery efficiency of 7 units was calculated by past and present calculation methods. Furthermore, this study attempts to find applicability and a method of increasing the energy recovery efficiency by taking advantage of available potentials. An analysis of the calculation results showed that the average values calculated by past methods, present methods, and the method that includes available potentials are 76.35%, 70.68%, and 78.24%, respectively. Therefore, the new calculation method for energy recovery efficiency is also applicable to domestic automotive shredder residue recycling facilities.

• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.43-48
• /
• 2023

Globally, there is a collaborative effort to achieve global carbon neutrality in response to climate change. In the case of South Korea, greenhouse gas emissions are rapidly increasing, presenting an urgent situation that requires resolution. In this context, this study developed a thermal energy collection device named a 'steam trap' and created an AI model capable of predicting future electricity usage by collecting energy usage data through steam traps. The average accuracy of electricity usage prediction with this AI model was 96.7%, demonstrating high precision. Consequently, the AI model enables the prediction and management of days with high electricity consumption and identifies which facilities contribute to elevated power usage. Future research aims to optimize energy consumption efficiency through efficient equipment operation using anomaly detection in steam traps and standardizing energy management systems, with the ultimate goal of reducing greenhouse gas emissions.

• Journal of Korea Multimedia Society
• /
• v.25 no.11
• /
• pp.1564-1571
• /
• 2022

Wireless sensor network(WSN) is being used in various fields such as reconnaissance, echelon scale identification, weather observation, etc. using small sensors in an environment without a network infrastructure environment. In addition, WSN uses limited battery power, so study on routing protocols to extend the lifetime of the network is important. PEGASIS, a hierarchical routing protocol, accounts for the majority of energy-efficient routing protocol studies and is well known as a representative protocol. In this study, based on PEGASIS, we propose a protocol that constructs multiple chains rather than one chain using the AoA of nodes. The proposed protocol has the advantage of reducing the transmission distance of nodes and eliminating unnecessary transmissions, thereby increasing energy efficiency compared to the existing protocols.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.101-107
• /
• 2009

The energy efficiency of existing lighting appliances has continuously been improving due to the government aid such as rebate programs and information of energy saving, etc. However, the usage pattern of lighting appliance at this moment has more been increasing higher illumination and indirect lighting method according that the taste of customers has changed variously. This paper estimates the economic evaluation and simulation for FPL45[W] lamp & ballast instead of FPL55 lamp & ballast in order to study the governmental support to demand side management.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.1
• /
• pp.51-59
• /
• 2024

Recently, ESG management has become a global trend, receiving increasing attention from stakeholders such as consumers, investors, and governments, as regulations related to ESG disclosure and supply chain due diligence have been strengthened since the United Nations Principles of Responsible Investment (UN PRI) was announced in 2006. ESG is an acronym for the environment (E), social (S), and governance (G) and is accepted as a key factor for the continuous survival and growth of a company. As a result, there are over 600 ESG management evaluation indicators operated domestically and internationally, and numerous global initiatives have emerged. Korea's Ministry of Trade, Industry and Energy also announced "K-ESG Guidelines (December 2011)" and "K-ESG Guidelines for Supply Chain Response (December 22)" to help SMEs introduce ESG management and respond to supply chain due diligence. However, small-scale manufacturing companies with poor financial, human resources, and technological capabilities face significant challenges in introducing ESG management. Accordingly, this study aims to examine the current status of ESG management adoption in small-scale manufacturing companies with less than 150 people in Korea and propose activation plan ESG management based on the diagnostic requirements of the "Supply Chain Response K-ESG Guidelines."

• Journal of radiological science and technology
• /
• v.41 no.4
• /
• pp.351-360
• /
• 2018

In recent years, demand for examination of bone mineral density (BMD) is increasing in Korea according aging society. Therefore, it is required to develop an efficient management program that can increase the safety and reliability of Dual Energy X-ray Absorptiometry (DXA) that can be applied to the criteria of the World Health Organization. It is necessary to develop a management program that can design a program to improve the accuracy and precision of the results of the analysis and to improve the accuracy of diagnosis of osteoporosis by development a high quality DXA report. It is recommended to prepare the examination manuals and to establish procedures of standard operating including the program to prevent the pitfalls during the examination, the compatibility evaluation of the examination data, and the contents of the radiation safety. In addition, relevant regulations on the production of high-quality DXA reports are required and government and related agencies should introduce individual and facility recognition programs through DXA measurement and education programs and training. It is considered that efforts should be made to prepare high quality DXA report by guidelines on all aspects of BMD for preparation about aging society.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.69-78
• /
• 2007

In recent years, embedded mobile systems have been expanding their application domains from embedded portable devices which only execute a specialized application such as MP3 player or digital camcoder to digital convergence devices which execute more complicated applications converged various functionalities such as video and audio play, digital dictionary, DMB, games, phone, etc. As it requires the increasing hardware performance such as more faster CPU and more larger RAM, display, disk size, it has brought about a corresponding increase in power consumption. However, coupled with relatively small gains in battery capacity over recent years, the importance of software architecture including intelligent power management has become paramount. In this paper, we have ported UbiFOSTM with energy saving techniques on the ARM9-based MBA2440 platform. For energy savings, we adapted the dynamic power management and the device power management schemes based on monitoring workload. Experimental results with some well-known applications show that proposed low power technique could save energy up to 24 %.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.15-22
• /
• 2022

Modern technology drives the world, increasing performance while reducing labor and time expenses. Tanzania Atomic Energy Commission (TAEC) tracks employee's levels of exposure to radiation sources using dosimeters. According to legal compliance, workers wear dosimeters for three months and one month at the workplace. However, TAEC has problems in tracking, issuing and returning dosimeters because the existing tracking is done manually. The study intended to develop a Personal Dose Management System (PDMS) that processes and manages the data collected by dosimeters for easy and accurate records. During the requirements elicitation process, the study looked at the existing system. PDMS' requirement gathering included document reviews, user interviews, and focused group discussions. Development and testing of the system were implemented by applying the evolutionary prototyping technique. The system provides a login interface for system administrators, radiation officers, and Occupational Exposed Workers. The PDMS grants TAEC Staff access to monitor individual exposed workers, prints individual and institutional reports and manages workers' information. The system reminds the users when to return dosimeters to TAEC, generate reports, and facilitates dispatching and receiving dosimeters effectively. PDMS increases efficiency and effectiveness while minimizing workload, paperwork, and inaccurate records. Therefore, based on the results obtained from the system, it is recommended to use the system to improve dosimeter data management at the institution.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.305-307
• /
• 2007

본 논문은 지역냉난방 집단에너지사업의 열원다원화를 위한 미활용폐열의 연계공급방안의 수립을 통한 지역냉난방 집단에너지사업의 개선방안을 제시하였다. 산업단지에서 발생되는 폐열에 대한 효율적인 회수 메커니즘과 연계공급 및 활용방안에 대한 전반적인 검토를 통한 미래 산형 에너지공급시스템의 근간이 될 집단에너지사업의 장기적 발전을 도모코자 하였다.