• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.1-5
• /
• 2009

NiTiCu alloys can produce a large force per unit volume and operate with a simple mechanism. For this reasons, it has been widely studied for application as a micro actuator. So in this study, one-way and two way shape memory effects of Ti-42.5at%Ni-2.0at%Cu alloys are studied. In the case of one-way shape memory effects, shape memory recoverable stress and strain of this alloys were measured by means of tension and compression tests under constant temperature. The strains by tension and compression stress were perfectly recovered by heating at any testing conditions also shape memory recoverable stress increased to 116 MPa in tension tests and to 260 MPa in compression tests. In the case of two-way shape memory effects, transformation temperatures from thermal cycling under constant uniaxial applied tension and compression loads linearly increased by increasing external loads and their maximum recoverable strain is 3.8% at 100MPa tensile condition and 2.2% at 125 MPa compression condition.

• Journal of the Korean Society of Safety
• /
• v.29 no.2
• /
• pp.12-17
• /
• 2014

This paper is aimed to analyze the characteristics of simultaneous voltage, current and temperature signals for poor connection on electrical connector. In order to attain this purpose, detected were the current and voltage signals on electric wire with series arc, named arc signals, and also monitored were the changes of RMS, instantaneous value of waveform in time domain and temperature value with video. Two states are made normal state over $5kgf{\cdot}cm$ and poor connections state below $0.5kgf{\cdot}cm$ by screw gage. In the voltage signal case, the voltage drop was increased with which the current was increased. In the current signal case, poor connections at the time interval 1~4A all showed "shoulder", as distinct difference from the normal state shown waveform pattern. In the temperature signal case, poor connections are twice at 1A and five times at 4A in the normal state. The temperature continues insulation of electrical wiring and connector can be carbonized. The results of this study will be effectively used in developing the preventive devices and system for electric fire by poor connections.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.37-46
• /
• 2016

Due to increased demand for remodeling and repair in construction market in recent year, the usage of horse scaffold is increasing in the indoor finish works. Injuries related horse scaffold are mainly caused by poor installation or of careless handling of scaffold. Approximately 300 workers are injuried at construction site every year, it is accounting for about 1.5% of the total construction sector and has increased on a year-to-year trends. But the main contents between national standards and speccifications related to the manufacture and usage of horse scaffolds are mutually inconsistent, In particular, the rules on occupational safety and health standards are the basis for the prevention of industrial injuries, there is no explicit application being made to the horse scaffold commonly used on construction sites. The purpose of this study was to analye the manufacture and usage situations in order to reduce construction injuries that occur at the horse scaffolds. It will be utilized the results of the analysis as the basis data for unifying the major domestic standards and specifications associated with the manufacture and usage of horse scaffold.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.23-27
• /
• 2014

The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

• Journal of the Korean Society of Safety
• /
• v.36 no.3
• /
• pp.1-6
• /
• 2021

Hydrogen is considered a cleaner energy source than fossil fuels. As a result, the use of hydrogen in daily life and economic industries is expected to increase. However, the use of hydrogen energy is currently limited because of safety issues. The rate of combustion of the hydrogen mixture is about seven times higher than that of hydrocarbon fuels. The hydrogen mixture is highly flammable and has a low minimum ignition energy. Therefore, it presents considerable risks for fire and explosions in all areas of hydrogen manufacturing, transportation, storage, and use. In this study, the auto-ignition characteristics of hydrogen were investigated numerically for diluted hydrogen mixtures. Auto-ignition temperature, a critical property predicting the fire and explosion risk in hydrogen combustion, was determined in well-stirred reactors. When N₂ and CO₂ were used to dilute the hydrogen/air mixture, the ignition delay time increased with increasing dilution ratios in both cases. The CO₂-diluted mixtures exhibited a longer ignition delay than the N₂-diluted mixtures. We also confirmed that lower initial ignition temperatures increased the ignition delay times at 950 K and above. Overall, the auto-ignition characteristics, such as the concentrations of participating species and ignition delay times, were primarily affected by the initial temperature of the mixture.

• Toxicological Research
• /
• v.31 no.3
• /
• pp.221-226
• /
• 2015

With the diversification and internationalization of the food industry and the increased focus on health from a majority of consumers, food safety policies are being implemented based on scientific evidence. Risk analysis represents the most useful scientific approach for making food safety decisions. Total diet study (TDS) is often used as a risk assessment tool to evaluate exposure to hazardous elements. Many countries perform TDSs to screen for chemicals in foods and analyze exposure trends to hazardous elements. TDSs differ from traditional food monitoring in two major aspects: chemicals are analyzed in food in the form in which it will be consumed and it is cost-effective in analyzing composite samples after processing multiple ingredients together. In Korea, TDSs have been conducted to estimate dietary intakes of heavy metals, pesticides, mycotoxins, persistent organic pollutants, and processing contaminants. TDSs need to be carried out periodically to ensure food safety.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1596-1601
• /
• 2005

Recently, the probable maximum precipitation (PMP) of dam sites has been greatly increased, compared to that in design, due to a rise in precipitation by abnormal weather, which led to an increase in National interest for dam safety. Therefore, the purpose of this study is to develop a management system of dam safety. The main contents of the first stage($'03{\sim}'04$) of the project consisted of determining the object of management system of dam safety through researched present situation of dam safety management in domestic and reviewing operation for management system of dam safety in abroad. In the second stage($'05{\sim}'06$), the study pursues constructing a basis process of synthetic safety management system through dam safety program and developing a system that can judge dam safety with an improve in reliability of measurement data.

• Journal of the Korean Institute of Gas
• /
• v.4 no.3 s.11
• /
• pp.33-38
• /
• 2000

When fire and explosion accidents have occurred due to a leak of the flammable gas involving the LNG & LPG in an industrialized society, it is a very important problem. Accordingly, in this paper, we have compared and analyzed the occurrence transition and the electrostatic energy according to dust supplies and pressure variations for the electric charge due to the gas-solids of pipe flow. As the experimental results, if dust amounts and the initial pressure increased, electric charge in the pipe and the exit increased. The Specific charge of $Fe_2O_3$ increased proportionally if the initial pressure increased but if the quantity of dust increased, the specific charge decreased. Energy increased significantly as the dust amounts and the initial pressure increased. The possibility of fire and explosion exist in the measuring point(M 1) and the Faraday cage if natural gas and LPG were used.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.75-82
• /
• 2008

As the number of passengers and the amount of cargo is getting increased, the traffic of aircraft and moving vehicle at an airport is getting busy. Especially, due to the heavy traffic of moving vehicles in the area of airside, the safety management of them is getting important. The study has been performed for suggesting improved methods in order to reduce safety accidents between aircraft and moving vehicles by introducing a safety management system for moving vehicles in airside of an airport. In order to improve the level of safety with the efficient management of moving vehicles in airside, the analysis of the domestic and international trends of the related technology and regulations has been performed. As a result, the conceptual design of safety management system has been suggested by utilizing the location information technology and four layers (hardware, network, middleware and application) approaches of safety management system.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.32-38
• /
• 2009

Construction companies economic to lighten the restrictions on safety education and training due to the domestic recession as long as the global downturn. With this, the Korean government lightened that restrictions, but the incidents are being sharply increased nowadays. The construction industry is more hazardous than any others, so, they insist to reinforce the training for incidents prevention, but it is prone to be disregarded at the subcontractors of the bigger construction companies due to their financial problems. According to these matters, this study hereby surveyed regarding their suggestions for the improvements of the training concepts through questionnaires below.