• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.111-115
• /
• 2009

In Korea, the probabilistically developed seismic hazard maps are used with deterministically derived seismic site coefficients in developing the design response spectrum of a specific site. Even though the seismic hazard maps and seismic site coefficients are incompatible, the current design code ignores such incompatibility. If the seismic hazard map and seismic coefficients are both developed in identical probabilistic framework, such problems can be solved. Unfortunately, the available method cannot be use to derive "true" probabilistic site coefficients. This study uses the ground motion time histories, which were developed as the result of a new probabilistic seismic hazard analysis in the companion paper, as input motions in performing one-dimensional equivalent linear site response analyses, from which the uniform hazard response spectra are generated. Another important characteristic of the hazard response spectra are that the uncertainties and randomness of the ground properties are accounted for. The uniform hazard spectra are then used to derive probabilistic site coefficients. Comparison of probabilistic and deterministically site coefficients demonstrate that there is a distinct discrepancy between two coefficients.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.415-426
• /
• 2006

Many technical and nontechnical issues hinder enterprise wide workflow management. The most significant technical issue is the inability to deal with the heterogeneity among users, workflow types, and WFMSs. Not all users demand the same workflow functionality, so user interfaces of different levels of sophistication are required. Because workflow types cannot always be fully predefined, they often need to be adjusted or extended during execution. Unlike relational database management systems, however, each WFMS often has differing workflow metamodels. This leads to incompatibility between WFMSs, making integration into an environment comprising many heterogeneous WFMSs a troublesome and sometimes impossible task. Current Workflow system consists mainly of Database system. It contains some problems like that the integration relationship among system processes cant be expressed properly. This research has been focused on two phases that should be considered in the Workflow system. First of all, the first phase is the analysis phase; one of its role is to figure out independent execution task unit(Workflow component). The second phase is design phase that provides with the framework to execute these task units actively. The Workflow component extraction method in the analysis phase uses a analysis method called C-C Net and, in the design phase, the architecture that makes the these Workflow component executed actively is provided. Through this research, each process is divided into a task unit and more effective Workflow system could be formed by executing these units actively. Current system layer calls task units, on the other hand, the Workflow system this research implemented provides with the architecture that places a layer between them that controls task units actively.

• Journal of Plant Biology
• /
• v.36 no.2
• /
• pp.127-132
• /
• 1993

Self-incompatibility in Brassica campestris is controlled by multi-allele system in a single genetic locus, the S locus, and it is elucidated that S-glycoproteins are S gene products. In this experiments, we examined the genetic mode(pollen tube behavior and segregation of S-glycoprotein), characteristic of S-glycoproteins and DNA constitution within nuclear genome on S gene family that unexplained by single locus model, and investigated the segregation pattern of S-glycoproteins in bred F1 generation. By diallel cross among the 15 plants within one family the existence of three types of homozygotes and three types of heterozygotes were observed, and segregation of S-allele could not explained by single locus model. From the results of IEF-immunoblot analysis for non-segregated individual plant, the segregation pattern of S specific bands was corresponded with results of diallel cross except with one case(SaSa genotype). The molecular weight of 6 different S-genotype varied in near by 50 kD, and each genotype expressed with 2 or 3 bands. Specific bands in SaSa, SbSb, ScSc has almost similar molecular weight between them. Southern analysis of genomic DNA probed with S-glycoprotein cDNA for 6 different genotypes revealed that there are clear difference in polymorphism, multiple bands of hybridization, when restriction enzymes of EcoR I were used. It could be assumed that there are several sequences related to the S-glycoprotein structural genes within their nuclear genome. Therefore, we suggested the possibilities that S-allele system could be controlled by multi-locus, that dominance-recessive interactions could be explained by modifier gene or supressor gene based on the results of abnormal segregation of S-glycoprotein in bred F1. The F2 analyses are progressing in now.

• Computers and Concrete
• /
• v.7 no.4
• /
• pp.347-364
• /
• 2010

Since its invention in the $19^{th}$ century, Reinforced Concrete (RC) has been widely used in the construction of a lot of different structures, as buildings, bridges, nuclear central plants, or even ships. The details of the mechanical response for this kind of structures depends directly upon the material behavior of each component: concrete and steel, as well as their interaction through the bond-slip, which makes a rigorous engineering analysis of RC structures quite complicated. Consequently, the practical calculation of RC structures is done by adopting a lot of simplifications and hypotheses validated in the elastic range. Nevertheless, as soon as any RC structural element is working in the inelastic range, it is possible to obtain the numerical prediction of its realistic behavior only through the use of non linear analysis. The aim of this work is to develop a new kind of Finite Element: the "Enhanced Solid Element (ESE)" which takes into account the complex composition of reinforced concrete, being able to handle each dissipative material behavior and their different deformations, and on the other hand, conserving a simplified shape for engineering applications. Based on the recent XFEM developments, we introduce the concept of nodal enrichment to represent kinematics of steel rebars as well as bonding. This enrichment allows to reproduce the strain incompatibility between concrete and steel that occurs because of the bond degradation and slip. This formulation was tested with a couple of simple examples and compared to the results obtained from other standard formulations.

• Computational Structural Engineering
• /
• v.8 no.2
• /
• pp.85-93
• /
• 1995

This study presents the formulation of beam transition elements and transition zone elements for the effective finite element analysis of the transition regions of coupled wall structures. Beam transition element can be described as the quasi beam element which is replaced by an equivalent plane stress element, keeping equally, the basic behavior of beam element, based on the kinematic and force constraints between beam and wall element. These beam transition elements solve the incompatibility related to different degrees of freedom between beam and wall element in transition regions. Also, the stiffness matrices of transition zone elements which are directly connected with beam transition elements in transition regions can be derived from the equivalent constraint conditions. These elements provide the reasonable mesh grading schemes for transition regions and can be usefully applied to the transition regions of all structures that the interactions of wall and beam element are considered.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.902-906
• /
• 1999

Electrically conducting composite films were prepared by a vapor phase in situ polymerization of pyrrole in the methyl cellulose film containing a copper(II) perchlorate. Methylcellulose had high affinity to pyrrole and was used as a matrix polymer. Conducting polypyrrole was embedded in the methylcellulose film forming a conducting network and the conductivity of the composite films ranged $10^{-1}$ to $10^{-7}S/cm$. The conductivities of conducting composite films were dependent on the nature of the matrix polymers, concentration of oxidant and polymerization time. In situ polymerization of pyrrole was observed in the matrix polymer and confirmed by UV-vis spectra. From the results of the thermogravimetric analysis, the chemical oxidative polymerization of pyrrole in the matrix polymers did not give any negative effects on the thermal stability of the composite films. Electron micrograph of composites indicated good penetration of PPy in the matrix polymer. DMA suggested a certain degree of incompatibility of the polypyrrole in the composites.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.35-35
• /
• 2015

Pleurotus eryngii has recently become a major cultivated mushroom; it uses tetrapolar heterothallism as a part of its reproductive process. Sexual development progresses only when the A and B mating types are compatible. Such mating incompatibility occasionally limits the efficiency of breeding programs in which crossing within loci-shared strains or backcrossing strategies are employed. Therefore, understanding the mating system in edible mushroom fungi will help provide a short cut in the development of new strains. We isolated and identified pheromone and receptor genes in the B3 locus of P. eryngii and performed a functional analysis of the genes in the mating process by transformation. A genomic DNA library was constructed to map the entire mating-type locus. The B3 locus was found to contain four pheromone precursor genes and four receptor genes. Remarkably, receptor PESTE3.3.1 has just 34 amino acid residues in its C-terminal cytoplasmic region; therefore, it seems likely to be a receptor-like gene. Real-time quantitative RT-PCR (real-time qRT-PCR) revealed that most pheromone and receptor genes showed significantly higher expression in monokaryotic cells than dikaryotic cells. The pheromone genes PEphb3.1 and PEphb3.3 and the receptor gene PESTE3.3.1 were transformed into P5 (A3B4). The transformants were mated with a tester strain (A4B4), and the progeny showed clamp connections and a normal fruiting body, which indicates the proposed role of these genes in mating and fruiting processes. This result also confirms that PESTE3.3.1 is a receptor gene. In this study, we identified pheromone and receptor genes in the B3 locus of P. eryngii and found that some of those genes appear to play a role in the mating and fruiting processes. These results might help elucidate the mechanism of fruiting differentiation and improve breeding efficiency.

• Journal of Families and Better Life
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2009

The purpose of this study was to resolve the issues of inferior housing environment and the population decrease in rural community by improving the environment and attracting urban inhabitants. A simulation on the costs and the local programs was operated from a point of view that Pension Insurance House with Long-term Lease and a plan for the program in connection with local resources should be accompanied to attract urban inhabitants. The study was carried out through mainly documents analysis and specialists' opinions. The simulation results are as follows. Firstly, the pre-existing rural housing development projects have only emphasized the hardware, while underestimated the post-management with operating programs. The software should be underlined when Pension Insurance House is developed. Secondly, as a result of the simulation on construction expenditure and the operating and maintenance cost for 30 years, about 82.3 million Wons are necessary residential expenses for 15 years per unit. Thirdly, in case of MUJU County, it has made the most of its pre-existing institutions. It's medical institutions provide medical care system with health education, facilities related leisure and culture offer recreational programs and the local community center and its program of each town helps new habitants adopt to the rural life. Additionally, the employment project of a local welfare center allow people living in a rural community to continue their careers with their talents and interests through local class programs for a life worth living. Lastly, guide for getting information of rural life, local community gathering and preliminary education should be carried out to reduce expectant tenants' incompatibility and assist them settle down early. The community program expansion is also required at the local government level.

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.31-47
• /
• 2003

The stone implements from the Unjeonri relic sites were studied on the basis of petrology, geochemistry and archaeogeological interpretations. Magnetic susceptibility (MS) of the stone implements were mainly lest than 0.5 $(10^{-3}\;SI\;unit)$, however, stone axe of syenitic rock (2.37), stone axe of schist (0.19) and stone knife of slate (0.11) showed different from the some measured rocks of an outcrop. Geochemical evolution trend of both a stone implement and the surface rock were identical when it a normalization to use the behavior, enrichment, compatibility and incompatibility of the elements. But, some rocks of a axe (schist), a knife (slate), a arrowhead (shale) could not confirm typical occurrence and the distribution area within the Unjeonri site and a radius 10 km. In the Unjeonri site, the stone implements suggest that coexisting two types as domestic- and foreign-type lithic artifacts.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.271-291
• /
• 2022

Pectin methylesterase (PME) plays an important role in vegetative and reproductive development and biotic/abiotic stress responses by regulating the degree of methyl-esterification of pectic polysaccharides in the plant cell wall. PMEs are encoded by a large multigene family in higher land plant genomes. In general, the expression of plant PME genes shows tissue- or cell-specific patterns and is induced by endogenous and exogenous stimuli. In this study, we identified PME multigene family members (CsPMEs) from the sweet orange genome and report detailed molecular characterization and expression profiling in different citrus tissues and two fruit developmental stages. We also discussed the possible functional roles of some CsPME genes by comparing them with the known functions of PMEs from other plant species. We identified 48 CsPME genes from the citrus genome. A phylogenetic tree analysis revealed that the identified CsPMEs were divided into two groups/types. Some CsPMEs showed very close phylogenetic relationships with the PMEs whose functions were formerly addressed in Arabidopsis, tomato, and maize. Expression profiling showed that some CsPME genes are highly or specifically expressed in the leaf, root, flower, or fruit. Based on the phylogenetic relationships and gene expression profiling results, we suggest that some CsPMEs could play functional roles in pollen development, pollen tube growth, cross incompatibility, root development, embryo/seed development, stomata movement, and biotic/abiotic stress responses. Our results shed light on the biological roles of individual CsPME isoforms and contribute to the search for genetic variations in citrus genetic resources.