• 제목/요약/키워드: Inclining test

검색결과 11건 처리시간 0.021초

선박의 횡요주기와 관성모멘트 변화에 따른 GM 추정 및 분석을 위한 실험 연구 (Experimental Study on the Analysis and Estimation of Metacentric Height in Response to Roll Period and Moment of Inertia Variations in Ships)

  • 최이찬;김정휘;윤동협
    • 해양환경안전학회지
    • /
    • 제29권4호
    • /
    • pp.380-388
    • /
    • 2023
  • 본 연구는 모형선박의 횡방향 무게분포를 변화시키면서 횡요주기 및 관성모멘트에 의한 GM을 추정하고 경사시험으로 계측되는 GM 값과 비교한다. 그 과정에서 각 수치를 분석하여 관계성을 파악한다. 실험 및 비교에 사용된 선박의 종류는 3종류로 7톤급, 20톤급 어선과 KVLCC의 모형선을 사용하였다. 실험은 스윙프레임 테스트와 자유 횡요 감쇠테스트를 수행하여 관성모멘트와 횡요주기를 계측하고, 경사시험으로 GM을 계측하였다. 관성모멘트와 횡요주기로 추정된 GM과 경사시험으로 구해진 GM은 선박의 무게 분포 변화에도 동일한 경향을 보였지만, 경사시험에서 구해진 GM이 더 작은 값을 보였다. 따라서 GM 추정 시에 관성모멘트나 횡요주기 외에도 추가적인 보정 계수나 파라미터가 필요하다고 판단된다. 추후 무게중심을 변화시켜 추정 GM과의 관계를 분석하여 보정 계수를 산출할 계획이다.

인플래터블 카약 개발을 위한 유체역학적 성능평가 기법 (Hydrodynamic Evaluation Method for Developing the Inflatable Kayak)

  • 기재석;하종규;장호윤
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제36권5호
    • /
    • pp.627-634
    • /
    • 2012
  • 본 연구는 개발된 인플래터블 카약의 유체역학적인 성능평가를 위한 수조시험 및 그 결과에 대한 내용을 포함하고 있다. 개발된 인플래터블 카약과 해외제품에 대한 경사시험, 선회시험은 해양공학수조에서 시제품에 대한 시험이 수행되었고 저항시험은 회류수조에서 축소된 모형선을 이용한 시험이 수행되어졌다. 다음과 같은 성능평가 방법을 이용하여 개발된 카약과 해외제품에 대한 각각의 장 단점이 비교되어졌다.

인플래터블 카약 개발을 위한 유체역학적 성능평가 (Hydrodynamic evaluation for developing the inflatable kayak)

  • 하종규;임이영;기재석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권6호
    • /
    • pp.623-630
    • /
    • 2013
  • 본 연구는 기 개발된 인플래터블 카약(RPO-2)과 새롭게 개발된 인플래터블 카약(RD-FK-11, RD-FK-12)의 유체역학적인 성능평가를 위하여 경사시험과 선회시험은 해양공학수조에서 저항시험은 축소된 모형선을 제작하여 회류수조에서 수행되었다. 결론적으로 각각의 카약에 대한 다양한 성능시험결과 복원성 측면에서는 KONA가 유리하고, 선회력과 무게중심 측면에서는 RD-FK-12가 우수하고, 저항성능 측면에서는 RD-FK-11이 KONA와 RPO-2에 비해 우수하였다.

LED집어등 설치에 따른 연안 채낚기 어선의 복원성능 (Stability of fishing vessel according to the LED luring lamp installation)

  • 정성재;안희춘
    • 수산해양기술연구
    • /
    • 제50권4호
    • /
    • pp.623-632
    • /
    • 2014
  • In this study, the stability of fishing vessels get some change in accordance with the installation of LED luring lamp in comparison with metal halide luring lamp were investigated. Inclining test for 9.77 ton class of squid jigging and hair-tail angling vessel was performed in order to make a stability evaluation. A performance analysis of the target vessels to the stability on the basis of KST-SHIP program was evaluated. The results were as follows in this study. The stability of the fishing vessel by a metal halide such as LED and the like according to the result obtained by the inclining test is a slightly present difference, and the stability is not affected. The fishing vessel with LED lamp installed satisfies all the stability criteria specified in law and IMO rule. Compared to the metal halide LED lamp the increase of the height of the center of gravity and the initial transverse metacenter was caused. Due to the LED installation, the somewhat wider wind area of the waterline, which appears as a result, does not lead to an actual increase in rolling period. But then it is necessary to be designed on that the LED lamp shape reduces wind pressure area. Because of LED lamp installation, the GM value of vessels is increasing faster rolling cycle so causes a decrease in the sense that the crew is aboard.

인덕션 집어등을 설치한 갈치채낚기 어선의 복원성능 (Stability of hair-tail angling fishing boat according to the induction fishing lamp installation)

  • 정성재;박성욱;정명국;정금철
    • 수산해양기술연구
    • /
    • 제59권1호
    • /
    • pp.1-8
    • /
    • 2023
  • In this study, the stability of fishing boat inducing the change of fishing lamp in accordance with the installation of induction lamp in comparison with metal halide lamp was investigated. Inclining test for 8.55 ton class of hair-tail angling fishing boat was performed in order to find a GM and light weight. A stability calculation of the target fishing boat on the basis of KST-SHIP program was evaluated. The stability of the fishing boat with a metal halide lamp such as induction lamp according to the result obtained by the inclining test is slightly different, and the stability is not so much affected. Due to the induction lamp installation, the wind area increased by about 3.178 m2. Before installing the induction fishing lamp, G0M was found to be 0.209 at full load departure and 0.296 at departure from fishing ground. After installing the induction lamp, the full load departure condition is 0.178 and the fishing ground departure condition is 0.260. The G0M value before and after installation of the induction fishing lamp shows a difference of about 3% at the full load departure condition. The value of the critical angle of inclination definition showed a difference of about 16%. Despite these differences, it is lower than the regulations; it was confirmed that there will be no significant difference unless it is in an overloaded state.

스마트폰용 경사시험 앱 개발 (Development of Incline Test Application for Smart Phone)

  • 이경훈;진재훈
    • 선박안전
    • /
    • 통권33호
    • /
    • pp.32-52
    • /
    • 2012
  • 선박의 경사시험에 사용되는 수동식 계측기기는 측정 자체가 사람의 관능에 의존하기 때문에 현장계측자 개인의 경험에 따라 측정 데이타의 신뢰도에 편차가 발생할 개연성이 높다. 그러나 경험치에 의존하지 않고 경사시험의 신뢰성을 담보할 측정방법의 개선이나 개발은 현재까지 없었다. 경사시험 시 정밀한 계측센서를 이용하여 경사각을 계측한다면, 선박의 복원성판정에 정확성을 기할 수 있을 것이다. 따라서 본 연구에서는 전자식 자이로 센서가 내장된 스마트폰(태블릿 PC)을 이용하여 선박의 경사각을 계측하고, 아울러 그에 따른 선박의 경하 상태의 배수량 및 중량중심을 자동으로 계산할 수 있는 앱을 개발하여 선박 복원성판정의 유효성을 검증하였다.

  • PDF

신형 인플래터블 카약 개발을 위한 유체역학적 성능평가 (Hydrodynamic Evaluation for Developing the New Inflatable Kayak)

  • 하종규;김호;임이영;기재석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권3호
    • /
    • pp.334-341
    • /
    • 2015
  • 본 연구는 새로운 3종 인플래터블 카약(inflatable kayak)의 유체역학적인 성능을 평가하여 신제품 개발에 필요한 정보를 제공하는 것이다. 유체역학적 제계산 및 해양공학수조와 회류수조를 이용하여 유체역학적인 성능을 평가한 결과는 첫째, v-hull kayak의 복원팔이 132.4mm으로 가장 크고, 선회반경은 가장 작게 나타났다. 둘째, needle knife kayak의 저항은 71N으로 가장 작게, 무게중심은 0.128m 가장 낮게 나타났으나 전반적으로 밀림(draft)이 발생하였다. 결론적으로 v-hull kayak은 복원성과 선회성면에서 needle knife kayak은 무게중심과 저항성면에서 우수하다고 판단된다.

CAE를 이용한 휠 내구성능 동역학 해석을 위한 연구 (The Study on Dynamic Analysis of Durability of a Wheel using CAE)

  • 박재흥;박태원;정성필
    • 한국정밀공학회지
    • /
    • 제29권12호
    • /
    • pp.1296-1303
    • /
    • 2012
  • There is a certain limit to reproduce phenomena between the real vehicle and road, since the existing methods to verify durability of the wheel are mostly uni-axial tests. And the change of durability of the wheel can't be predicted since these tests don't consider the camber angle and lateral force as important factors. In this paper, the FE models of the wheel-tire and drum are created. Then, the vertical and lateral loads are applied to wheel-tire assembly and the camber angle is applied by inclining the wheel-tire assembly to the drum. Based on the analysis result, the crack position is predicted to be created in the body of the wheel. The variation of the stress according to the camber angle is verified and the maximum spot of the stress changes continually.

음의 복원성과 선박의 횡경사 (Negative GM and Ship's Transverse Stability)

  • 유수연;양형선;정대득
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2016년도 춘계학술대회
    • /
    • pp.108-109
    • /
    • 2016
  • 선박이 횡경사 되었을 때, 그 발생 원인을 파악하고 적절히 대응하는 것은 매우 중요하다. 특히 최근 발생한 대형 해난사고 중 일부는 항행중 복원력 감소에 의한 횡경사와 관련된 것으로 추정된다. 본 연구에서는 음의 복원력(-GM)에 의한 선박의 횡경사를 실험하고, 그 값을 동일 조건에서의 계산값과 비교하였다. 또한 Loll과 List를 구별하는 것과 Loll 발생 시 대응방안에 대해서 기술하고자 한다.

  • PDF

Ultrasonographic Evaluation of Renal Cortex and Outer Medulla Thickness in Dogs with Chronic Kidney Disease

  • Lee, Siheon;Hong, Sungkyun;Kim, Hyejin;Oh, Dayoung;Kim, Seungji;Choen, Sangkyung;Choi, Mincheol;Yoon, Junghee
    • 한국임상수의학회지
    • /
    • 제34권3호
    • /
    • pp.208-212
    • /
    • 2017
  • This study was performed to retrospectively pursue any correlation between renal cortex thickness (RCT), outer medulla thickness (OMT) on ultrasonography (US) and chronic kidney disease (CKD) with International Renal Interest Society (IRIS) stage. Medical records and US findings of the dogs diagnosed CKD were reviewed for comparing to those of the clinically healthy dogs from March. 2015 through June. 2016. To evaluate the correlation about normal and CKD patients, RCT and the OMT were measured on US images. RCT and OMT were adjusted by dividing body surface area for standardization (RCTS, OMTS). Also the ratio of RCT/OMT were calculated and these indices were evaluated to investigate any tendency between 5 groups (normal and 4 IRIS stages) using Jonckheere-Terpstra trend test (J-T test). The RCTS showed a declining tendency (p < 0.02) and the OMTS showed an inclining tendency from normal through each IRIS stage (p < 0.01). The RCT/OMT showed also declining tendency (p < 0.01). Although the gold standard for renal function including GFR is lack, it is thought that differentiation between normal and CKD patients could be possible on US measurement of renal cortex and outer medulla thickness, which could be an alternative index for kidney function in diagnostic imaging.