• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.35-39
• /
• 2011

본 논문에서는 FEV 차량용 복합소재 연료탱크의 탄소섬유 적층두께에 따라 달라지는 강도안전성에 미치는 기여율의 영향을 해석하고자 한다. 기여율에 의한 영향을 FEM 모델링으로 고찰하기 위해, 복합소재 연료탱크의 알루미늄 라이너와 탄소섬유 적층에 작용하는 von Mises 등가응력을 후프방향과 헤리컬방향에 대하여 각각 계산 하였다. FEM 해석결과에 따르면, 알루미늄 라이너에 작용하는 등가응력 기여율은 후프방향으로는 77.5%, $70^{\circ}C$ 경사진 헤리컬방향으로는 18.11%, $12^{\circ}C$ 경사진 헤리컬방향으로는 4.39%로 각각 작용하는 것으로 나타났다. $12^{\circ}C$ 경사진 탄소섬유의 적층 두께비가 후프방향 적층 두께비의 42% 정도로 높게 유지됨에도 불구하고 알루미늄 라이너 소재에서 보여준 기여율 경향은 탄소섬유 적층의 강도안전성에 대해서도 유사한 것으로 나타났다. 결과적으로, 탄소섬유 연료탱크의 강도안전성은 탄소섬유 적층의 두께보다 와인딩 각도에 의해 더 많은 영향을 받는다는 계산결과를 보여주고 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.5990-6008
• /
• 2019

Recognizing license plate from its traffic camera captured images is one of the most important aspects in many traffic management systems. Despite many sophisticated license plate recognition related algorithms available online, license plate recognition is still a hot research issue because license plates in each country all round the world lack of uniform format and their camera captured images are often affected by multiple adverse factors, such as low resolution, poor illumination effects, installation problem etc. A novel method is proposed in this paper to solve the inclination problem of license plates in their camera captured images through four parts: Firstly, special edge pixels of license plate are chosen to represent main information of license plates. Secondly, least square methods are used to compute the inclined angle of license plates. Then, coordinate rotation methods are used to rotate the license plate. At last, bilinear interpolation methods are used to improve the performance of license plate rotation. Several experimental results demonstrated that our proposed method can solve the inclination problem about license plate in visual aspect and can improve the recognition rate when used as the image preprocessing method.

• 한국컴퓨터정보학회논문지
• /
• 제25권5호
• /
• pp.117-126
• /
• 2020

본 연구에서는 3차원 시뮬레이션 프로그램으로 40-50대 중년남성의 보디스 원형을 제작한 후 가상착의로 외관평가 및 공극률, 단면도, 색분포도 등을 분석하여 패턴 간의 차이를 비교 분석해 봄으로써 중년남성에게 적합한 보디스 패턴 제도 방법을 선정하고자 하였다. 이를 통하여 중년남성용 의복을 제작 생산하는 업체에 패턴 개발에 필요한 기초자료를 제공하고자 하였다. 보디스 원형 분석 결과, J패턴이 중년남성의 체형에 가장 적합한 보디스 패턴으로 분석되었다. E패턴은 너무 여유가 없고, L패턴과 N패턴은 여유가 너무 많은 것으로 평가되었다. 그러나 J패턴도 등길이와 앞중심길이의 설정에 있어서 수정이 요구되었다. 등이 앞으로 굽고 어깨도 앞으로 기우는 노화현상에 따라 앞뒤길이 및 어깨각도, 어깨길이 치수의 조정이 요구되었다. 향후 J패턴을 수정하여 연구용 패턴을 제작한 후, 중년남성에 대한 실제 착의실험을 통한 중년남성용 보디스 원형개발이 이루어져야 할 것으로 생각된다.

• 한국수산과학회지
• /
• 제34권6호
• /
• pp.661-665
• /
• 2001

해상가두리의 안정성 및 기능성 향상을 위한 최적 계류시스템을 개발하기 위하여 천해역에 적합한 계류시스템을 검토하여 유연부 이 계류시스템을 선정하였다. 이를 위한 해석프로그램을 정립하고, 수리모형실험 결과와 비교하였다. 해석프로그램의 타당성을 확인 한 후, 적용할 만한 계류시스템을 구성하고 수치계산을 통하여 해상가두리를 위한 적정 계류시스템을 제시하였다. 해상가두리의 계류시스템은 유연부이 계류시스템이 권장되며, 계류배치는 탁월 외력환경과 일치하는 방향으로 하고, 수평계류삭인 나일론 로프는 해상가두리 길이의 0.5배 이상, 경사 와이어 로프는 수심의 2배 이상이 바람직한 것으로 나타났다. 또한, 중간부 이의 증설은 계류장력 및 표류변위를 감소시키는 효과를 가질 것으로 판단된다. 차후, 해상가두리의 동적응답 특성을 계류시스템 해석모델의 개발과 계류시스템의 설계가 요구된다.

• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.521-541
• /
• 1991

The purpose of this study was to investigate the growth changes of the mandible and associated structure in response to postural hyperpropulsion and changes after removal of postural hyperpropulsor. The experimental animals were four-week-old Sprague-Dawley males rats. The animals were worn the postural hyperpropulsor diurnally for 10 hours per day. The animals were sacrified after 1-week, 2-week, 4-week postural hyperpropulsion and 4-week postural hyperpropulsion 4-week removal period. The growth changes of rat mandible and associated structures following postural hyperpropulsion on the growing rat mandible were observed biometrically, radiographically and histologically. The finding were as follows. 1. The angle between the chief axis of the bone trabeculae in the condyle and the mandibular plane of rats observed for 4 weeks after worn the hyperpropulsor for 4 weeks was directed posteriorly as compared with that of control rats. 2. The ratio of mandibular length to maxillary length of experimental rats was higher than that of control rats. 3. The tooth axis of mandibular first molar of rats worn the postural hyperpropulsor for 4 weeks was mesially inclined as compared with control rats. 4. Histologically, the cartilage layer at the superior region of the condyle of rats worn the postural hyperpropulsor for 2 weeks appeared thicker than that of same aged normal rats, and generalized increase of the cartilage layer was shown on the condyle of rats worn the postural hyperpropulsor for 4 weeks. 5. There was no significant histologic difference between rats observed for 4 weeks after worn the postural hyperpropulsor for 4 weeks (8 week experimental rats) and same aged normal rats. 6. The newly formed bone at anterior region of articular fossa of rats worn the postural hyperpropulsor for 2 weeks and 4 weeks was thicker than that of same aged normal rats.

• Geomechanics and Engineering
• /
• 제2권4호
• /
• pp.253-280
• /
• 2010

A new prediction model is derived for the uplift capacity of suction caissons using a hybrid method coupling genetic programming (GP) and simulated annealing (SA), called GP/SA. The predictor variables included in the analysis are the aspect ratio of caisson, shear strength of clayey soil, load point of application, load inclination angle, soil permeability, and loading rate. The proposed model is developed based on well established and widely dispersed experimental results gathered from the literature. To verify the applicability of the proposed model, it is employed to estimate the uplift capacity of parts of the test results that are not included in the modeling process. Traditional GP and multiple regression analyses are performed to benchmark the derived model. The external validation of the GP/SA and GP models was further verified using several statistical criteria recommended by researchers. Contributions of the parameters affecting the uplift capacity are evaluated through a sensitivity analysis. A subsequent parametric analysis is carried out and the obtained trends are confirmed with some previous studies. Based on the results, the GP/SA-based solution is effectively capable of estimating the horizontal, vertical and inclined uplift capacity of suction caissons. Furthermore, the GP/SA model provides a better prediction performance than the GP, regression and different models found in the literature. The proposed simplified formulation can reliably be employed for the pre-design of suction caissons. It may be also used as a quick check on solutions developed by more time consuming and in-depth deterministic analyses.

• Wind and Structures
• /
• 제22권2호
• /
• pp.253-272
• /
• 2016

The paper concerns with the method and results of wind tunnel investigations of the Strouhal number (St) of a stationary iced cable model of cable-supported bridges with respect to different angles of wind attack. The investigations were conducted in the Climatic Wind Tunnel Laboratory of the Czech Academy of Sciences in $Tel{\check{c}}$. The methodology leading to the experimental icing of the inclined cable model was prepared in a climatic section of the laboratory. The shape of the ice on the cable was registered by a photogrammetry method. A section of an iced cable model with a smaller scale was reproduced with a 3D printing procedure for subsequent aerodynamic investigations. The St values were determined within the range of the Reynolds number (Re) between $2.4{\cdot}10^4$ and $16.5{\cdot}10^4$, based on the dominant vortex shedding frequencies measured in the wake of the model. The model was oriented at three principal angles of wind attack for each of selected Re values. The flow regimes were distinguished for each model configuration. In order to recognize the tunnel blockage effect the St of a circular smooth cylinder was also tested. Good agreement with the reported values in the subcritical Re range of a circular cylinder was obtained. The knowledge of the flow regimes of the airflow around an iced cable and the associated St values could constitute a basis to formulate a mathematical description of the vortex-induced force acting on the iced cable of a cable-supported bridge and could allow predicting the cable response due to the vortex excitation phenomenon.

• 한국해안·해양공학회논문집
• /
• 제30권1호
• /
• pp.1-9
• /
• 2018

본 연구에서는 투과성 판을 통과하면서 발생하는 에너지 손실효과를 나타내는 비선형 항력 항을 등가 선형화기법으로 선형화시킨 준선형 모델을 제안하였다. 이 모델을 경계요소법(Boundary Element Method)으로 풀어 2차원 조파수조의 투과성 소파장치를 개발에 활용하였다. 투과성 판에서의 항력계수는 수리 모형실험 결과와 비교를 통해 새롭게 구하였다. 공극률 0.1, 잠긴 깊이 d/h = 0.1, 경사각도 $10^{\circ}{\leq}{\theta}{\leq}20^{\circ}$를 갖는 투과성 소파장치가 전반적으로 우수한 소파성능을 보였다. 개발된 준선형 수치모델은 앞으로 다양한 형태의 투과성 소파장치의 최적 설계에 활용될 것이다.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.28-33
• /
• 2009

This study examined the mounting status of cigar lighter receptacles for vehicles and analyzed the tracking phenomenon that occurs when foreign material entered a cigar lighter receptacle to obtain data for the analysis of accident investigation. Regardless of the vehicle's output, cigar lighter receptacles are mounted in a vehicle horizontally, vertically, or at tilting or inclined angle. The tilting type cigar lighter receptacle is much easier to use but current leakage resulting from foreign materials (coffee, beverages, water, etc.) falling into the cigar lighter receptacle may cause a fire to start. This study used a vehicle battery (DC 12V) as a power supply for the tracking test and configured its circuit in the same way as that of an electrical device in a vehicle. The tracking phenomenon that occurred in the standby mode of the vehicle exhibited a fine flame and an irregular occurrence of smoke. While this tracking phenomenon was occurring, the leakage current and the reaching distance of the flame were measured to be approximately 930mA and $20{\sim}50cm$, respectively. It is thought that the resultant flame may ignite toluene, dust, cigarettes, etc. It was observed that as the tracking progressed, the internal metal socket melted and a hole was created, the surface of which was also severely carbonized. In addition, the electrical resistance of the carbonized conductive path was measured to be approximately $30{\Omega}$. It is thought that this much resistance may cause local heating when leakage current flows and could ignite any nearby flammable material.