• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.391-403
• /
• 1993

For the purpose of investigating mesiodistal axial inclination of posterior teeth in normal occlusion group, open bite and deep bite group and investigating the correlationship between the axial inclination of posterior teeth and overbite of anterior teeth, a cephalometric study was performed on the subjects consisted of normal occlusion group(40), open bite group(71 : Angle's Class I, Class II, division 1 25, Class III 25) and deep bite group(64 : Angle's Class I 23, Class II, division 1 21, Class III 20). Mesiodistal axial inclination of posterior teeth to occlusal, mandibular and palatal plane were measured. The findings of this study were as follows : 1. Upper and lower posterior teeth were more mesially inclined to occlusal plane in open bite group than in deep bite group. 2. Lower posterior teeth were more mesially inclined in deep bite group than in open bite group in Angle's Class II, division 1 malocclusion but there were no significant differences in Angle's Class I and Class III malocclusion. 3. There was no significant correlationship between the axial inclination of posterior teeth to each plane and overbite of anterior teeth in open bite group. 4. There was a significant correlationship between the axial inclination of upeer and lower second premolar to occlusal plane and overbite of anterior teeth in Angle's Class I, Class II, division 1 and Class III malocclusion.

• PNF and Movement
• /
• v.15 no.3
• /
• pp.259-266
• /
• 2017

Purpose: This study aimed to compare muscle activities in the right leg during squatting on an angle-adjustable inclined wooden plate at three different angles. Methods: The subjects were 19 healthy adult men and women. An angle-adjustable inclined wooden plate was used for the experiment, and the subjects performed squatting at three adjusted angles of $0^{\circ}$ ankle angle, $10^{\circ}$ ankle flexion, and $10^{\circ}$ plantar flexion. Squatting was randomly performed without a sequence. The knee angle was set at $45^{\circ}$, and a goniometer was used to measure the angles accurately. Electromyography was employed to measure and compare muscle activity in the right leg in each condition. The measured data were converted to root mean square values to calculate the muscle activities. Results: This study showed no statistically significant difference at a $0^{\circ}$ ankle angle, but a statistically significant difference was found in the vastus medialis at $10^{\circ}$ of ankle flexion. Moreover, statistically significant differences were observed in the vastus medialis and lateralis at $10^{\circ}$ of plantar flexion. Conclusion: This study showed a statistically significant difference in the vastus medialis at $10^{\circ}$ of ankle flexion and statistically significant differences in the vastus medialis and lateralis at $10^{\circ}$ of plantar flexion. Therefore, it may be effective to perform squatting at $10^{\circ}$ of ankle flexion when intending to selectively strengthen the vastus medialis and at $10^{\circ}$ of plantar flexion when intending to strengthen both the vastus medialis and lateralis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.2
• /
• pp.34-41
• /
• 1986

The ultrasonical characteristics of inclined planar reflectors is investigated by the maximum amplitude method. The reflected ultrasound is varied by the reflector size, shape, inclination and using transducers. It was found that the detecting ability for planar reflectors was decreased with increasing transducer size and misorientation angle and increased with decreasing ultrasonic frequency, also the misorientation angle of planar reflectors affected significantly for the measurement of refklector size.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.890-893
• /
• 2000

In this paper, the test of machinability according to the cutting positions when the ball end milling of hemispheric workpiece is carried out to find the optimum cutting position of free form surface die. Tool runout, cutting force. and chip form are measured. The results show that the optimum cutting condition to get the constant feed per tooth is the inclined angle of 40 degree of workpiece.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.24.1-24.1
• /
• 2005

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.445-446
• /
• 2013

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.202-209
• /
• 2005

This study concerns the performance of boiling heat transfer in inclined thermosyphons with internal grooves. A study was carried out with the performance of the heat transfer of the inclined thermosyphon having 60 internal grooves in which boiling and condensation occur. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphon is also tested for comparison. Distilled water, methanol and ethanol have been used as the working fluid. The inclination angle, three working fluids, heat flux and the boiling heat transfer coefficient at the evaporator zone are estimated from the experimental results. The experimental results have been assessed and compared with existing correlations. Imura's and Kusuda's correlation for boiling showed in good agreement with experimental results within ${\pm}20%$ in plain thermosyphon. The high heat transfer coefficient was found between $25^{\circ}$ and $30^{\circ}$ of inclination angle for water and between $20^{\circ}$ and $25^{\circ}$ for methanol and ethanol. The relatively high rates of heat transfer have been achieved in the thermosyphon with internal micro grooves.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.47-63
• /
• 2014

In this study theories of earth pressure such as Rankine, Coulomb, Trial Wedge, Improved Trial Wedge, used in the design for onshore and offshore structures, are analyzed and the characteristics of loaded pressure to virtual back (wall, plane) and wall surface in accordance with the structure type are suggested. To investigate characteristics of earth pressure, gravity retaining wall with inclined angle and cantilever wall with inclined ground are movilized for onshore structures and caisson and block type quay wall are mobilized for offshore structures. Based on various theories, the earth pressure applied angle(wall friction angle) and sliding angle toward the wall, which is influenced by the heel length, are calculated and compared. In the case of long heel, the pressure by Rankine's method in virtual plane and the mobilized angle are most reasonably estimated by the ground slope, and in the case of short heel, the pressure by Coulomb's method and the mobilized angle by the angle of wall friction. In addition, the sliding angle toward the wall estimated by the improved trial wedge method is large than the value of Rankine's method. Finally, in this study the reasonable method for calculating the pressure and the mobilized angle that can be applied to the routine design of port structures is proposed. The proposed method can decide the earth pressure with length of a heel and a self weight of retaining wall according to sliding angle toward the wall.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.5 no.1
• /
• pp.64-75
• /
• 1978

In order to know cephalometric norms for the preschool children, this roentgeno cephalometric study was undertaken in each 50 Korean male and female children of primary dentition age from 4 to 5 year. The following results were obtained. 1. In the skeletal analysis, there was no significant difference between male and female in angular measurement and the linear measument of the male was generally greater than that of the female. 2. Saddle angle was $122.3^{\circ}$, articular angle was $147.6^{\circ}$, gonial angle was $119.4^{\circ}$ and the sum of each angle was $396.1^{\circ}$ in male and $396.6^{\circ}$ in female. 3. The ratio of mandibular body to anterior cranial base was about 1 : 0.91. 4. In the primary dentition, suggested that the nasion and point A move forward relative to sella turcica in a fashion, pogonion and point B are equal in angular position relative to plan S-N, bony chin and chin button was yet underdeveloped, and the forward growth of mandible was seen rapid than maxilla after 4 years. 5. Suggested that the percentage of anterior facial height to the posterior facial height were 64.4% in male and 64.1% in female. 6. Maxillary primary incisors was more upright than the permanent incisors, mandibular primary incisors was inclined lingually relative to the permanent incisor, and primary incisors was more upright than the permanent incisors. 7. Maxillary primary incisors in female was inclined labially than male. 8. In the the relationship of the upper lip and lower lip to the esthetic line, the upper lip was 2.11mm and the lower lip was 2.33mm front of the esthetic line.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.324-333
• /
• 1998

Measurements of the local heat transfer coefficients on a hemispherically concave surface with a round oblique impinging jet were made. The liquid crystal transient method was used for these measurements. This method, which is a variation of the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystal for the surface temperature measurements. The Reynolds number used was 23,000 and the nozzle -to -jet distance was L/d=2, 4, 6, 8 and 10 and the jet angle was $\alpha$=0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$and 40$^{\circ}$. In the experiment, the maximum Nusselt number at all region occurred at L/d(equation omitted)6 and Nusselt number decreases as the inclined jet angle increases. For the normal jet the contours of constant Nusselt number are circular and as the jet is inclined closer and closer to the surface the contours become elliptical shape. The decreasing rate of the Nusselt number at X/d＞ 0(upstream) on a surface curvature are higher than those on a flate plate and the decreasing rate of the Nusselt number at X/d ＜0(downstream) on a surface curvature are lower than those on a flate plate. And also, the decreasing rate of local Nusselt number distribution at X/d ＜0(upstream) exhibit lower than with X/d ＜0(downstream) as jet angle increases. The second maximum Nusselt number occurred at long distance from stagnation point as jet angle increases.