• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.446-457
• /
• 2020

Crescentic sand bar in the coastal zone of eastern Korea is a common morphological feature and the rhythmic patterns exist constantly except for high wave energy events. However, four consecutive typhoons that directly and indirectly affected the East Sea of Korea from September to October in 2019 impacted the formation of longshore uniform sand bar and overall shoreline retreats (approx. 2 m) although repetitive erosion and accretion patterns exist near the shoreline. Widely used XBeach to predict storm erosions in the beach is utilized to investigate the morphological response to a series of storms and each storm impact (NE-E wave incidence). Several calibration processes for improved XBeach modeling are conducted by recently reported calibration methods and the optimal calibration set obtained is applied to the numerical simulation. Using observed wave, tide, and pre & post-storm bathymetries data with optimal calibration set for XBeach input, XBeach successfully reproduces erosion and accretion patterns near MSL (BSS = 0.77 (Erosion profile), 0.87 (Accretion profile)) and observed the formation of the longshore uniform sandbar. As a result of analysis of simulated total sediment transport vectors and bed level changes at each storm peak Hs, the incident wave direction contributes considerable impact to the behavior of crescentic sandbar. Moreover, not only the wave height but also storm duration affects the magnitude of the sediment transport. However, model results suggest that additional calibration processes are needed to predict the exact crest position of bar and bed level changes across the inner surfzone.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.308-320
• /
• 2021

An integrated sediment management approach that includes the recovery of the amount of declined sediment supply is effective as a fundamental solution to coastal erosion. During planning, it is essential to analyze the transfer mechanism of the sediments generated from estuaries (the junction between a river and sea) to assess the amount and rate of sediment discharge (from the river to sea) supplied back to the coast. Although numerical models that interpret the tidal sand bar flushing process during flooding have been studied, thus far, there has been no study focusing on the formation and development processes of tidal sand bars. Therefore, this study aims to construct wave deformation, flow regime calculation, and topographic change analysis models to assess the amount of recovered sediment discharge and reproduce the tidal sand bar formation process through numerical analysis for integrated littoral drift management. The tidal sand bar formation process was simulated, and the wave energy and duration of action concepts were implemented to predict the long-term littoral movement. The river flux and wave conditions during winter when tidal sand bars dominantly develop were considered as the external force conditions required for calculation. The initial condition of the topographic data directly after the Maeupcheon tidal sand bar flushing during flooding was set as the initial topography. Consequently, the tidal sand bar formation and development due to nearshore currents dependent on the incident wave direction were reproduced. Approximately 66 h after the initial topography, a sand bar formation was observed at the Maengbang estuary.

• Journal of Internet Computing and Services
• /
• v.23 no.5
• /
• pp.69-78
• /
• 2022

As the use of Internet of Things (IoT) devices has expanded, digital forensics coverage of the National Police Agency has expanded to smart home areas. Accordingly, most of the existing studies conducted to acquire smart home platform data were mainly conducted to analyze local data of mobile devices and analyze network perspectives. However, meaningful data for evidence analysis is mainly stored on cloud storage on smart home platforms. Therefore, in this paper, we study how to acquire stored in the cloud in a Hey Home Air environment by extracting accessToken of user accounts through a cookie database of browsers such as Microsoft Edge, Google Chrome, Mozilia Firefox, and Opera, which are recorded on a PC when users use the Hey Home app-based "Hey Home Square" service. In this paper, the it was configured with smart temperature and humidity sensors, smart door sensors, and smart motion sensors, and artifacts such as temperature and humidity data by date and place, device list used, and motion detection records were collected. Information such as temperature and humidity at the time of the incident can be seen from the results of the artifact analysis and can be used in the forensic investigation process. In addition, the cloud data acquisition method using OpenAPI proposed in this paper excludes the possibility of modulation during the data collection process and uses the API method, so it follows the principle of integrity and reproducibility, which are the principles of digital forensics.

• Journal of Nutrition and Health
• /
• v.55 no.2
• /
• pp.263-277
• /
• 2022

Purpose: The present study examined the associations of Korean Food-based Index of Dietary Inflammatory Potential (FBDI) scores with the prevalence of diabetes and hemoglobin A1c (HbA1c) level of diabetes patients in Korean adults. Methods: The Korean Genome and Epidemiology Study (KoGES) Health Examinee baseline data, collected between 2004 and 2013 and followed up between 2012 and 2016, were used in our study. A total 56,391 participants including diabetes (n = 5,733) and non-diabetes (n = 50,658) were analyzed. The subjects were classified into quartiles of FBDI scores using the semi-quantitative food-frequency questionnaire developed for KoGES. The prevalence rate of diabetes under FBDI scores was assessed by Cox proportional risk models and the severity of the diabetes was analyzed by multiple regression analysis. Results: There were 775 incident cases of diabetes after a mean follow-up of 3.97 years. There was no statistically significant association between FBDI scores and incidence of diabetes. Among diabetes patients at baseline, FBDI scores were related to the risk of progression of diabetes which was represented by greater than 9% HbA1c (Q1 vs. Q4; odds ratio, 1.562 [95% confidence intervals, 1.13-2.15]; p for trend = 0.007). The stratified analysis showed a stronger association in females, irregular exercise group, and higher body mass index group. Conclusion: These results suggest that a pro-inflammatory diet is not associated with the incidence of diabetes but is related to the HbA1c level of diabetes patients. Thus, further longitudinal studies with longer periods are required to determine a relationship between dietary inflammatory index and diabetes in Korea.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.97-103
• /
• 2022

An aircraft component can only be mounted on an aircraft if it has been certified to have a structural robustness under flight load conditions. Among the major components of the aircraft, a pylon is a structure that connects external equipment such as an engine, and external attachments with the main wing of an aircraft and transmits the loads acting on it to the main structure of the aircraft. In civil aircraft, when there is an incident of fire in the engine area, the pylon prevents the fire from spreading to the wings. This study presents the results of structural static tests performed to verify the structural robustness of a fuel pylon used to mount external fuel tank in an aircraft. In the main text, we present the test set-up diagram consisting of test fixture, hydraulic pressure unit, load control system, and data acquisition equipment used in the structure static test of the fuel pylon. In addition, we introduce the software that controls the load actuator, and provide a test profile for each test load condition. As a result of the structural static test, it was found that the load actuator was properly controlled within the allowable error range in each test, and the reliability of the numerical analysis was verified by comparing the numerical analysis results and the strain obtained from the structural test at the main positions of the test specimen. In conclusion, it was proved that the fuel pylon covered in this study has sufficient structural strength for the required load conditions through structural static tests.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.2
• /
• pp.153-165
• /
• 2022

The COVID-19 Pandemic incident forced all educational and learning activities to move online, so it is no longer an option to use information and communication technology for education and learning. Venture capital has made the largest investment ever in Edu-tech startups. This study investigates the factors influencing the intention to use digital technology in education, taking into account the Unified Theory of Acceptance and Use of Technology (UTAUT) along with digital literacy, which has become an essential ability in the digital age. As a result of the structural equation model analysis, we find that performance expectation, effort expectation, and social influence have a positive effect on the intention to use digital technology in education. Moreover, digital literacy has a positive effect on performance expectation, effort expectation, and social impact, but the direct effect on the intention to use digital technology on learning is not significant. Furthermore, to see the moderating effect of age, the results of multi-group analysis present that the differences between 10s and 60s, between 20s and 60s, between 30s and 60s on the path of social influence on the intention to use digital technology in education are significantly reduced. This study academically contributes to expanding the research on the factors affecting the intention to use digital technology in a specific situation of education by considering both digital literacy and Unified Theory of Acceptance and Use of Technology (UTAUT). In addition, it can be used as a practical guide to the factors to be considered for each age when making learning participants more actively use digital technology.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.151-162
• /
• 2024

As the incidence direction of ground motion (or seismic wave) changes, the seismic response of the structure will also change according to that direction. In order to analyze the effect of the seismic response of the example bridge according to the direction of incidence of ground motion, the acceleration response spectra (S_a-T1) corresponding to the 1-second period obtained for various angles of incidence were obtained. Using S_a-T1, 40 sets of orthogonal pairs of horizontal component seismic waves corresponding to 5 types of percentiles were generated. Seismic vulnerability analysis of the bridge piers was performed by obtaining the seismic response of an example bridge according to the direction of incidence of ground motion. By analyzing the seismic vulnerability analysis of seismic waves corresponding to five types of percentiles, it was found that the median value of the seismic vulnerability curve differs by about 1.2 to 2.6 times depending on the incident direction of the seismic wave. In other words, depending on the incidence direction of seismic waves, the degree of damage to the bridge structure can vary by about 1.2 to 2.6 times.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.3
• /
• pp.105-115
• /
• 2024

In coastal structure design incorporating revetments, the assessment of wave overtopping discharge relies on hydraulic model experiments. Numerous empirical formulas have been developed to predict overtopping discharge based on quantitative data from these experiments. Typically, for revetment structures aimed at mitigating wave overtopping, crest height is determined by considering the maximum amplitude of the design wave, resulting in a relatively high freeboard compared to wave heights. However, achieving complete prevention of all wave overtopping would require the crown wall to have substantial crest heights, rendering it economically impractical. Therefore, the concept of limiting discharge has been introduced in the design of revetment structures, aiming to restrict wave overtopping discharge to an acceptable level. Consequently, many coastal structures in real-world settings feature relatively lower freeboard heights than incident wave heights. This study investigated wave overtopping discharge on rubble-mound breakwaters with relatively low freeboard heights through hydraulic model experiments. Furthermore, it conducted a comparative analysis of the predictive capabilities of existing empirical formulas for estimating overtopping discharge using experimental data.

• Journal of Platform Technology
• /
• v.12 no.1
• /
• pp.91-105
• /
• 2024

As the number of cases of applying IT systems to the existing isolated ICS (Industrial Control System) network environment continues to increase, security threats in the ICS environment have rapidly increased. Security threat scenarios help to design security strategies in cybersecurity training, including analysis, prediction, and response to cyberattacks. For successful cybersecurity training, research is needed to develop valid and reliable security threat scenarios for meaningful training. Therefore, this paper proposes a case-based security threat scenario development methodology for cybersecurity training in the ICS environment. To this end, we develop a methodology consisting of five steps based on analyzing actual cybersecurity incident cases targeting ICS. Threat techniques are standardized in the same form using objective data based on the MITER ATT&CK framework, and then a list of CVEs and CWEs corresponding to the threat technique is identified. Additionally, it analyzes and identifies vulnerable functions in programming used in CWE and ICS assets. Based on the data generated up to the previous stage, develop security threat scenarios for cybersecurity training for new ICS. As a result of verification through a comparative analysis between the proposed methodology and existing research confirmed that the proposed method was more effective than the existing method regarding scenario validity, appropriateness of evidence, and development of various scenarios.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.4
• /
• pp.452-458
• /
• 1999

Objectives: The authors conducted the study to evaluate bias when potentially diseased subjects were included in cohort members while analyzing risk factors of chronic liver diseases. Methods: Total of 14,529 subjects were followed up for the incidence of liver diseases from January 1993 to June 1997. We have used databases of insurance company with medical records, cancer registry, and death certificate data to identify 102 incident cases. The cohort members were classified into potentially diseased group(n=2,217) when they were HBsAg positive, serum GPT levels higher than 40 units, or had or has liver diseases in baseline surveys. Cox's model were used for potentially diseased group, other members, and total subjects, respectively. Results: The risk factors profiles were similar for total and potentially diseased subjects: HBsAg positivity, history of acute liver disease, and recent quittance of smoking or drinking increased the risk. while intake of pork and coffee decreased it. For the potentially diseased, obesity showed marginally significant protective effect. Analysis of subjects excluding the potentially diseased showed distinct profiles: obesity increased the risk, while quitting smoking or drinking had no association. For these intake of raw liver or processed fish or soybean paste stew increased risk; HBsAg positivity, higher levels of liver enzymes and history of acute liver diseases increased the risk. Conclusions: The results suggested the potential bias in risk ratio estimates when potentially diseased subjects were included in cohort study on chronic liver diseases, especially for lifestyles possibly modified after disease onset. The analytic strategy excluding potentially diseased subjects was considered appropriate for identifying risk factors for chronic liver diseases.