• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.46-52
• /
• 2004

Hisardale male lambs (n=24, 4-5 month of age) were maintained on a conventional ration for a month, to equilibrate the body mineral status. Six lambs were sacrificed after one month of feeding; the samples of organs were analyzed to ascertain mineral status. The remaining 18 lambs were divided into 3 groups of 6 each on body weight basis. Three dietary treatments containing 100 ($T_1$), 110 ($T_2$) and 120% ($T_3$) of minerals (Ca, P, S, Zn and Mn) as specified by NRC (1985) were formulated and each treatment was alloted ad libitum to a group for 120 days. Blood and wool samples were collected at monthly intervals. At the end of the experiment a balance trial of 5 days duration was conducted to study the balance of mineral elements. The effective intake of minerals was Ca, 111 and 120, P, 110 and 122; S, 112 and 129; Zn, 112 and 126 and Mn, 109 and 123 percent in $T_2$ and $T_3$, respectively, in comparison to $T_1$ (100). The additional mineral supplementation had no significant effect on dry matter intake. The average daily weight gain was higher (p<0.01) in $T_2$ and $T_3$ than the control ($T_1$). The lambs under treatments $T_2$ (8.72) and $T_3$ (8.47 kg) consumed apparently lesser amount of dry matter per unit gain as compared to $T_1$ (10.81 kg). Significantly higher (p<0.05) dry matter and crude protein digestibility (%) were observed in $T_2$ and $T_3$ than in $T_1$. The mean balances for different elements were Ca, 1.14, 1.68 and 1.67 g; P, 1.70, 1.95 and 2.18 g; S, 0.54, 0.92 and 1.11 g; Zn, 22.56, 25.30 and 28.71 mg; Cu, 7.94, 5.71 and 5.53 mg; Fe, 33.19, 32.94 and 31.03 mg and Mn, 8.24, 14.40 and 16.07 mg/lamb/day. The retention of supplemental minerals increased (p<0.01) while that of Cu decreased (p<0.01) due to supplementation of minerals (Ca, P, S, Zn and Mn). Retention as per cent of intake increased statistically for S and Mn while that of Cu decreased. It can be concluded that supplementation of minerals (Ca, P, S, Zn and Mn) higher than the recommended level improved body weight gain and feed to gain ratio. The retention of minerals increased due to supplementation. Therefore, an additional supplementation of deficient minerals (Ca, P, S, Zn and Mn) by 10% was beneficial for Hisardale male lambs under tropical condition in India.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.313-318
• /
• 2005

Li-doped ZnS layers were grown by molecular beam epitaxy. It was found that relatively low growth temperature is suitable for effective incorporation of Li acceptors. The layers grown under optimized conditions exhibited photoluminescence spectra dominated by neutral-acceptor-bound excitons. Such layers also showed electrically p-type behavior in capacitance-voltage characteristics. The net acceptor concentration is estimated to be approximately $3{\times}10^{15}\;cm^{-3}$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.33-41
• /
• 2003

The optical properties of $ZnS_ySe_{1-\chi-y}:Te_{\chi}(\chi<0.08,y~0.11)$ alloys grown by molecular beam epitaxy (MBE) have been investigated by photoluminescence (PL) and PL-excitation (PLE) spectroscopy. Good optical properties and high crystal quality were established with lattice match condition to GaAs substrate. At room temperature, emission in the visible spectrum region from blue to green was obtained by varying the Te content of the ZnSSe:Te alloy. The efficient blue and green emission were assigned to $Te_1 and Te_n(n\geq2)$cluster bound excitons, respectively. Bright green (535 nm) and blue (462 nm) light emitting diodes (LEDs) have been developed using ZnSSe:Te system as an active layer. The turn-on voltage of 2.1 V in current-voltage characteristics is very small compared to that of commercial InGaN-based LEDs (>3.4 V), indicating the formation of a good ohmic contact due to the optimized p-ZnSe/p-ZnTe multi-quantum well (MQW) superlattice electrode layers.

• Spatial Information Research
• /
• 제10권2호
• /
• pp.201-213
• /
• 2002

대도시화와 산업화에 따른 중금속 오염으로 많은 환경오염을 일으키고 있다. 본 연구에서는 Cd, Cu, Fe, Mn, Pb, Zn와 같은 중금속 원소들의 분산과 산출상태를 규명하기 위해 광주광역시의 도로변에서 분진을 채취하여 분석하였다. 분진중의 pH를 측정하였으며 0.1N HCI에 의한 용출실험으로 Cd, Cu, Fe, MN, Pb 및 Zn 함량을 AAS를 이용하여 분석하였다. 광주시의 도로변 분진의 pH는 5.60-7.09범위로 약산성 내지는 거의 중성에 가깝게 나타났으며, 0.IN HCI을 이용한 부분분해 방법으로 분석한 결과는 일부 지역을 제외하고는 오염도가 높다고 판단하기는 어려움이 있지만 Cd와 Cu는 서구지역 특히 광천터미널에서 멀지 않은 지역에서 약간 높은 수치를 보여주며, Mn과 Pb는 북구와 남구에서 약간 높은 수치를 보였으며 Zn는 평균 150.09ppm으로 오염이 상당히 진행되고 있었다. P.I.는 전 지역이 1이하로 우려할 상황 은 아니다. 본 연구와 같은 분석방법을 이용한 다른 지역과 비교해 볼 때, Cd 와 Zn의 오염이 상당히 진행되고 있음을 확인했다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권2호
• /
• pp.67-72
• /
• 2008

Al-doped p-type ZnO thin films were fabricated by RF magnetron sputtering on n-Si (100) and homo-buffer layers in pure oxygen ambient. ZnO ceramic mixed with 2 wt% $Al_2O_3$ was selected as a sputtering target. XRD spectra show that the Al-doped ZnO thin films have ZnO crystal structure. Hall Effect experiments with Van der Pauw configuration show that p-type carrier concentrations are arranged from $1.66{\times}10^{16}$ to $4.04{\times}10^{18}\;cm^{-2}$, mobilities from 0.194 to $198\;cm^2V{-1}s^{-1}$ and resistivities from 0.0963 to $18.4\;{\Omega}cm$. FESEM cross section images of different parts of a p-type ZnO:Al thin film annealed at $800^{\circ}C$ show a compact structure. Measurement for same sample shows that density is $5.40\;cm^{-3}$ which is smaller than theoretically calculated value of $5.67\;cm^{-3}$. Photoluminescence (PL) spectra at 10 K show a shoulder peak of p-type ZnO film at about 3.117 eV which is ascribed to electron transition from donor level to acceptor level (DAP).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.141-142
• /
• 2008

Single crystal $ZnIn_2S_4$ layers were grown on thoroughly etched semi-insulating GaAs(100) substrate at $450^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $ZnIn_2S_4$ source at $610^{\circ}C$. The temperature dependence of the energy band gap of the $ZnIn_2S_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) = 2.9514eV - ($7.24\times10^{-4}$ eV/K)$T^2$/(T + 489 K). After the as-grown $ZnIn_2S_4$ single crystal thin films was annealed in Zn-, S-, and In-atmospheres, the origin of point defects of $ZnIn_2S_4$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{Zn}$, $V_s$, $Zn_{int}$, and $S_{int}$, obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the S-atmosphere converted $ZnIn_2S_4$ single crystal thin films to an optical p-type. Also, we confirmed that In in $ZnIn_2S_4$/GaAs did not form the native defects because In in $ZnIn_2S_4$ single crystal thin films existed in the form of stable bonds.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.318-325
• /
• 2008

Single crystal $ZnIn_2S_4$ layers were grown on thoroughly etched semi-insulating GaAs(100) substrate at $450^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $ZnIn_2S_4$ source at $610^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence (PL) and double crystal X-ray rocking curve (DCRC). The temperature dependence of the energy band gap of the $ZnIn_2S_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=2.9514\;eV-(7.24{\times}10^{-4}\;eV/K)T^2/(T＋489\;K)$. After the as-grown $ZnIn_2S_4$ single crystal thin films were annealed in Zn-, S-, and In-atmospheres, the origin of point defects of $ZnIn_2S_4$ single crystal thin films has been investigated by the photoluminescence (PL) at 10 K. The native defects of $V_{Zn}$, $V_S$, $Zn_{int}$, and $S_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the S-atmosphere converted $ZnIn_2S_4$ single crystal thin films to an optical p-type. Also, we confirmed that In in $ZnIn_2S_4$/GaAs did not form the native defects because In in $ZnIn_2S_4$ single crystal thin films existed in the form of stable bonds.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.378-378
• /
• 2011

본 연구에서는 ZnO 나노선 기판을 제작하여 그 위에 밴드갭이 낮은 물질인 CdS, CdSe를 증착시킨 후 p-type 반도체 물질인 CuSCN을 증착시켜 안정성이 향상된 양자점 감응형 태양전지를 제작하였다. ZnO 나노선 기판은 투명한 FTO 기판 위에 ZnO를 진공증착시켜 seed layer를 제작하고 그 위에 $10{\mu}m$정도의 길이의 나노와이어를 성장시킨 후, 밴드갭이 낮은 CdS, CdSe 물질과의 다중접합을 이용하여 제작하고, 이러한 나노선 구조위에 chemical solution deposition을 이용하여 ${\beta}$-CuSCN을 형성시켰다. 양자점 감응형 태양전지는 ZnO 나노선을 photoanode로 이용하고 ZnO 나노선은 암모니아수와 아연염을 이용한, 비교적 저온의 수열합성법을 통해 합성하였고, sensitizer로 쓰인 CdS, CdSe 물질은 CBD방식을 통하여 합성된 나노선 위에 in-situ로 접합시켰다. 또한, 기존의 액체전해질을 이용한 양자점 감응형 태양전지의 안정성을 향상시키기 위해 p-type의 반도체 물질인 CuSCN물질을 propyl sulfide를 이용, ${\sim}80^{\circ}C$의 열을 가하여 in-situ 방식으로 다공성 구조에 효율적으로 접합이 가능하도록 deposition하였다. 일반적으로, CuSCN film은 홀 전도체로서의 장점을 지닌 반면, 전도성이 낮은 단점이 있기 때문에 이를 향상시키기 위해서 첨가제를 이용, 농도에 따라서 전도도가 향상되고 셀의 성능이 향상되는 것을 확인하였다. 이와 같이 합성된 구조는 주사전자현미경(SEM), X-선 회절(XRD), 솔라시뮬레이터 등의 분석장비를 이용하여 태양전지로서의 특성을 분석하였다. 또한 안정성 평가를 위하여 시간에 따른 셀의 특성변화도 비교하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.89-92
• /
• 2009

High-quality Al-N doped p-type ZnO thin films were deposited on Si and buffer layer/Si by DC magnetron sputtering in a mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin films showed a carrier concentration in the range of $1.5{\times}10^{15}{\sim}2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2${\sim}$2.864 ${\Omega}cm$, mobility in the range of 3.99${\sim}$31.6 $cm^2V^{-1}s^{-l}$, respectively. It was easier to dope p-type ZnO films on Si substrates than on buffer layer/Si. The film grown on Si showed the highest quality of photoluminescence (PL) characteristics. The Al donor energy level depth $(E_d)$ of Al-N codoped ZnO films was reduced to about 50 meV, and the N acceptor energy level depth $(E_a)$ was reduced to 63 meV.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.104-110
• /
• 2001

Structural, optical and electrical properties of Cd$_{1-x}$ Zn$_{x}$S films deposited by chemical bath deposition(CBD), which is a very attractive method for low-cost and large-area solar cells, are presented. Especially, in order to control more effectively the zinc component of the films, zinc acetate, which was used as the zinc source, was added in the reaction solution after preheating the reaction solution and the pH of the reaction solution decreased with increasing the concentration of zinc acetate. The films prepared after preheating and pH control had larger zinc component and higher optical band gap. The crystal structures of Cd$_{1-x}$ Zn$_{x}$S films was a wurtzite type with a preferential orientation of the (002) plane and the lattice constants of the films changed from the value for CdS to those for ZnS with increasing the mole ratio of the zinc acetate. The minimum lattice mismatch between Cd$_{1-x}$ Zn$_{x}$S and CdTe were 2.7% at the mole ratio of (ZnAc$_2$)/(CdAc$_2$+ZnAc$_2$)=0.4. As the more zinc substituted for Cd in the films, the optical transmittance improved, while the absorption edge shifted toward a shorterwavelength. the photoconductivity of the films was higher than the dark conductivity, while the ratio of those increased with increasing the mole ratio of zinc acetate. acetate.