• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.625-629
• /
• 2003

GaAs PIN 다이오드를 이용하여 저손실 고출력 MMIC 리미터를 설계하고 제작하였다. 고전력 수용 능력을 증가시키기 위하여 새로운 GaAs PIN 다이오드 에피구조를 제안하였다. 2종류의 리미터 회로를 설계하고 그리미팅 전력을 측정하였다. 측정결과에서 리미팅 전력은 설계회로 토폴로지에 따라 달라졌다. 제작된 2단 리미터의 리미팅 전력은 14 ㎓에서 각각 17 ㏈m과 23 ㏈m으로 측정되었다.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.159-163
• /
• 2009

This paper presents the design and implementation of Q-band MMIC phase shifters using InGaAs PIN diodes. The topology using a thin-film microstrip line(TFMS) has been proposed to achieve the desired phase-shift as well as good loss characteristics. Five single-bit MMIC phase shifters have been implemented by using a developed BCB(benzocyclobutene)-based multi-layer fabrication technology. The developed phase shifters have less than 3.4 dB of insertion loss and better than 11 dB of input and output return loss in the frequency range of 43 to 47 GHz. To the authors' knowledge, this is the first demonstration of high-performance InGaAs PIN diode-based MMIC phase shifters operating at Q-band frequencies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.441-443
• /
• 1995

A new optical-resistive voltage divider, which consists of light emitting diode, optic fiber, PIN-photo diode and a high qualify shielding resistive divider, whose total response time is 7.35 [ns], has been obtained. The optical to electrical signal converter was constructed with GaAsP series light emitting diode. The response characteristics have been verified by applying the Marx impulse voltage generator experimentally. Comparing with the performance of conventional resistive voltage divider, the characteristics of the proposed optical-resistive voltage divider are more excellent in step response and less sensitive to electromagnetic interference.

• 대한전자공학회논문지TC
• /
• 제40권9호
• /
• pp.392-397
• /
• 2003

Lange 커플러를 이용한 반사구조 위상변위기는 광대역에서 위상변이를 얻는데 사용되는 회로이다. 이런 5-비트 반사구조에서 33.75°는 대개 11.25°와 22.5°를 동시에 "on"시켜서 얻는 방법이 사용되어져 왔다. 본 논문은 33.75° 위상특성을 개선하기 위하여 GaAs PM 다이오드와 리액티브 부하로 구성된 별도의 회로를 제안하였으며 MMIC로 구현하였다. 2-6 GHz에서 제안된 회로는 기 발표 논문에 비하여 33.75°를 기준으로 할 때 평균 4.7° 개선된 특성을 얻었다. 기존 회로와 비교할 때 삽입손실 및 반사손실은 거의 변화가 없었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.319-320
• /
• 2007

We researched basic study about electrical characteristics of Zinc Selenide (Faraday Cell), which is known for various temperature of good-performance, that applied measuring current or protecting instrument by Optical Current Transducer, on Gas Insulated Switchgear. Measuring System consists of VCSEL produced 850nm IR Laser, Pin Photo Diode made of GaAs surveyed as Optical Power Meter, and Optical Fibers specified Multi-mode. We observed optical output changes during measurement of currents increasing by 100[A] in range from 0[A] to 1,000[A] and set temperature condition increasing by $5[^{\circ}C]$ in a range from $30[^{\circ}C]\;to\;60[^{\circ}C]$.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1996년도 학술대회
• /
• pp.27-31
• /
• 1996

In this paper, The SSPA(Solid State Power Amplifier) is 100 watts amplifier which is used with C-Band Satellite communication Up-Link frequency, 5.875 ∼6.425 GHz. SSPA requires more output power than is available from a single GaAs FET with result it is necessary to combine the output of many device. To achieve a high power, it is important to make a good N-way power divider which has a small different phase, good combining efficiency and high power handling capability. The reliability of Power GaAs FET decrease with increasing junction temperature, power amplifier in general dissipate amount of power. It is important to provide them with a heatsink and a temperature compensation circuit to dispose of the unwanted heat. To compensate temperature, Using PIN diode attenuator, it is enable to get a precision gain control. The output power of the SSPA is more than 100 watt with which the TWTA (Traveling-Wave Tube Amplifier) can be replaced. Each stage was measured by the Network analyzer PH8510C, Power meter Booton 42BD, The gain is more than 53 dB, flatness is less than 1.5 dB.