• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.502-508
• /
• 2009

Antimicrobial activity of Sargassum thunbergii was determined by paper disc assay and minimum concentration inhibitor (MIC) test. A water extract of S. thunbergii did not show the antimicrobial activity, but an ethanol extract of S. thunbergii (SHE) inhibited Serratia liquefaciens, Salmonella Typhimurium, Pseudomonas aerogenosa and all of the tested gram-positive bacteria at 4 mg/mL. Especially, Bacillus subtilis, Clostridium perfringens and Listeria monocytogenes were susceptible to SHE. As the results of MIC test, SHE inhibited the growth of B. subtilis, Staphylococcus aureus and Listeria monocytogenes at concentration of $0.1{\sim}0.3%$, and inhibited C. perfringens at 0.01%. In the thermal and pH stability test for SHE, antibacterial activities of SHE were maintained when the SHE was treated at $121^{\circ}C$ for 15 minutes or under pH $2{\sim}8$. SHE was partitioned in the order of n-hexane, chloroform, ethyl acetate and butanol. As the results of the MIC test for each obtained fraction, no fraction exhibited higher antibacterial activity than that of the crude SHE. However, a mixture of chloroform, ethylacetate and ethanol fractions showed higher antibacterial activity than SHE.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1610-1616
• /
• 2016

This study aimed to establish an optimal extraction process and high performance liquid chromatography-ultraviolet (HPLC-UV) analytical method for determination of 3,5-dicaffeoylquinic acid (3,5-DCQA) as a part of materials standardization for the development of a xanthine oxidase inhibitor as a health functional food. The quantitative determination method of 3,5-DCQA as a marker compound was optimized by HPLC analysis using a Luna RP-18 column, and the correlation coefficient for the calibration curve showed good linearity of more than 0.9999 using a gradient eluent of water (1% acetic acid) and methanol as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 320 nm. The HPLC-UV method was applied successfully to quantification of the marker compound (3,5-DCQA) in Aster glehni extracts after validation of the method with linearity, accuracy, and precision. Ethanolic extracts of A. glehni (AGEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 30, 50, 70, and 80% ethanol for 3, 4, 5, and 6 h, respectively. Among AGEs, 70% AGE at $70^{\circ}C$ showed the highest content of 3,5-DCQA of $52.59{\pm}3.45mg/100g$ A. glehni. Furthermore, AGEs were analyzed for their inhibitory activities on uric acid production by the xanthine/xanthine oxidase system. The 70% AGE at $70^{\circ}C$ showed the most potent inhibitory activity with $IC_{50}$ values of $77.01{\pm}3.13{\sim}89.96{\pm}3.08{\mu}g/mL$. The results suggest that standardization of 3,5-DCQA in AGEs using HPLC-UV analysis would be an acceptable method for the development of health functional foods.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.369-376
• /
• 2008

The aim of this study was to compare the compositions and cytotoxicity of white ProRoot MTA (white mineral trioxide aggregate) and 3 kinds of Portland cements. The elements, simple oxides and phase compositions of white MTA (WMTA), gray Portland cement (GPC), white Portland cement (WPC) and fast setting cement (FSC) were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD). Agar diffusion test was carried out to evaluate the cytotoxicity of WMTA and 3 kinds of Portland cements. The results showed that WMTA and WPC contained far less magnesium (Mg), iron (Fe), manganese (Mn), and zinc (Zn) than GPC and FSC. FSC contained far more aluminum oxide ($Al_2O_3$) than WMTA, GPC, and WPC. WMTA, GPC, WPC and FSC were composed of main phases. such as tricalcicium silicate ($3CaO{\cdot}SiO_2$), dicalcium silicate ($2CaO{\cdot}SiO_2$), tricalcium aluminate ($3CaO{\cdot}Al_2O_3$), and tetracalcium aluminoferrite ($4CaO{\cdot}Al_2O_3{\cdot}Fe_2O_3$). The significance of the differences in cellular response between WMTA, GPC, WPC and FSC was statistically analyzed by Kruskal-Wallis Exact test with Bonferroni' s correction. The result showed no statistically significant difference (p > 0.05). WMTA, GPC, WPC and FSC showed similar compositions. However there were notable differences in the content of minor elements. such as aluminum (Al), magnesium, iron, manganese, and zinc. These differences might influence the physical properties of cements.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.706-713
• /
• 2012

This study was carried out to investigate the contents of monacolin K and citrinin, along with the sensory quality and antioxidant activity of mulberry leaf tea fermented by $Monascus$ $pilsous$ (FMM). Total monacolin K content of FMM was 0.058%, but citrinin was not detected. Redness of brewed FMM was remarkably higher than that of unfermented mulberry leaf tea (UFM). In sensory evaluation of brewed FMM, while astringent taste and savory taste were lower, flavor, color, and overall acceptability were significantly higher than those of UFM. Total polyphenol contents of UFM and FMM were 83.1 and 23.61 mg/g (dry basis), total flavonoid contents of UFM and FMM were 17.96 and 3.99 mg/g (dry basis), respectively. Xanthine oxidase (XO) inhibitory activity and superoxide dismutase (SOD)-like activity of FMM were lower than those of UFM. Electron-donating ability and ferric-reducing antioxidant power of FMM were slightly lower than those of UFM. However, the antioxidant activities of FMM per polyphenol content were markedly higher than those of UFM. These results suggest that FMM may scavenge excessive reactive oxygen spices (ROS) via inhibition of XO and SOD-like activity. Furthermore, FMM demonstrated relatively higher acceptability and antioxidant ability along with functionality of $Hongguk$ (red yeast rice), and therefore could be utilized to prevent various ROS-induced diseases.

• Microbiology and Biotechnology Letters
• /
• v.38 no.2
• /
• pp.168-176
• /
• 2010

Acellular dermal matrix (ADM), produced by decellularization from human cadaveric skin, has been used for various biomedical applications. A manufacturing process for ADM ($SureDerm^{TM}$) using tri-n-butyl phospahate (TnBP) and deoxycholic acids as the decellularization solution has been developed. The manufacturing process for $SureDerm^{TM}$ has 70% ethanol treatment and ethylene oxide gas sterilization for inactivating infectious microorganisms. The purpose of this study was to examine the efficacy of the 70% ethanol treatment, decellularization process using 0.1% TnBP and 2% deoxycholic acids, and EO gas sterilization process in the inactivation of viruses. A variety of experimental model viruses for human pathogens, including the human immunodeficiency virus type 1 (HIV-1), bovine herpes virus (BHV), bovine viral diarrhoea virus (BVDV), hepatitis A virus (HAV), and porcine parvovirus (PPV) were all selected for this study. Enveloped viruses such as HIV-1, BHV, and BVDV were effectively inactivated to undetectable levels by 70% ethanol treatment. However HAV and PPV showed high resistance to 70% ethanol treatment with the log reduction factors of 1.85 and 1.15, respectively. HIV-1, BHV, and BVDV were effectively inactivated to undetectable levels by decellularization process. All the viruses tested were completely inactivated to undetectable levels by EO gas treatment. The cumulative log reduction factors of HIV-1, BHV, BVDV, HAV, and PPV were $\geq12.71$, $\geq18.08$, $\geq14.92$, $\geq6.57$, and $\geq7.18$, respectively. These results indicate that the production process for $SureDerm^{TM}$ has a sufficient virus-reducing capacity to achieve a high margin of the virus safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.367-377
• /
• 2017

This study examined the effects of the salinity of seafood wastewater on the sulfur denitrification process. An examination of the denitrification efficiency showed that the optimal EBCT was 1hr at an influent T-N concentration of 20mg/L or lower and 2-3hr at an T-N concentration of 30mg/L. An examination of the denitrification efficiency according to the nitrogen load showed that the legal effluent water quality criterion was satisfied when the influent load was maintained within $0.496kg/m^3/day$. On the other hand, the reactor volume increased when this was applied to the site. Therefore, the influent load should be within $0.372kg/m^3/day$ considering the denitrification and economic efficiency. At a load of $0.248{\sim}0.628kg/m^3{\cdot}day$, the k value was $0.0890{\sim}0.5032hr^{-1}$. The batch experimental results according to the $Cl^-$ concentration showed that at an influent nitrogen concentration of 30.0mg/L, the effect of the denitrification efficiency was not large below the salinity of $7,000mgCl^-/L$, but inhibition occurred above $9,000mgCl^-/L$. Calculations of the reaction rate constant according to the $Cl^-$ concentration showed that the reaction rate constant was $0.1049{\sim}0.2324hr^{-1}$ at a raw wastewater concentration of ${\sim}5,000mgCl^-/L$. In contrast, the k value was $0.1588hr^{-1}$ at $7,000mgCl^-/L$ and $0.1049hr^{-1}$ at $9,000mgCl^-/L$.

• Applied Biological Chemistry
• /
• v.47 no.2
• /
• pp.251-257
• /
• 2004

The root of lxeris dentata forma albiflora was extracted with 80% aqueous MeOH and solvent fractionated with EtOAc, n-BuOH and water, successively. From the EtOAc and n-BuOH fractions, four sesquiterpene compounds were isolated through the repeated silica gel and ODS column chromatographies. The chemical structures were determined as zaluzanin C (1), $9{\alpha}-hydroxyguaian-4(l5),10(14),11(13)-triene-6,12-olide$ (2), $3{\beta}-O-{\beta}-D-glucopyranosyl-8{\alpha}-hydroxyguaian-4(15),10(14 )-diene-6,12-olide$ (3), and $3{\beta}-O-{\beta}- D-glucopyranosyl-8{\beta}hydroxyguaian-10(14)-ene-6,12-olide$ (4) through the interpretation of several spectral data including 2D-NMR. Some showed the inhibitory effects on DGAT (Diacylglycerol acyltransferase), ($IC_{50}$ values of 1, 2: 0.13, 0.10 mM), the catalyzing enzymes of the intracellular esterification of diacylglycerol and FPTase (Famesyl-protein transferase), ($IC_{50}$ values of 1, 2: 0.15, 0.18 mM), the farnesylation enzyme for Ras protein charge of cancer promotion.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2007

Present tooth bonding system can be categorized into total etching bonding system (TE) and self-etching boding system (SE) based on their way of smear layer treatment. The purposes of this study were to compare the effectiveness between these two systems and to evaluate the effect of number of themocycling on microleakage of class V composite resin restorations. Total forty class V cavities were prepared on the single-rooted bovine teeth and were randomly divided into four experimental groups: two kinds of bonding system and another two kinds of thermocycling groups. Half of the cavities were filed with Z250 following the use of TE system, Single Bond and another twenty cavities were filled with Metafil and AQ Bond, SE system. All composite restoratives were cured using light curing unit (XL2500, 3M ESPE, St. Paul, MN, USA) for 40 seconds with a light intensity of $600mW/cm^2$. Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Half of teeth were thermocycled 500 times and the other half were thermocycled 5,000 times between $5^{\circ}C$ and $55^{\circ}C$ for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}A$) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. From this study, following results were obtained: There was no interaction between variables of bonding system and number of thermocycling (p = 0.485). Microleakage was not affected by the number of thermocycling either (p = 0.814). However, Composite restoration of Metafil and AQ Bond, SE bond system showed less microleakage than composite restoration of Z250 and Single Bond, TE bond system (p = 0.005).

• Radiation Oncology Journal
• /
• v.9 no.2
• /
• pp.215-219
• /
• 1991

To evaluate the effect of MVP chemotherapy and hyperfractionated radiotherapy in Stage III unresectable non small cell lung cancer (NSCLC), authors have conducted a prospective randomized study since January 1991, Stage IIIa or IIIb unresectable NSCLC patients were treated with hyperfractionated radiotherapy (120 cGy/fx BID) up to 6500 cGy following 3 cycles of induction MVP (Mitomycin C 6 mg/$m^2$, Vinblastine 6 mg/$m^2$, Cisplatin 60 mg/$m^2$) and randomized for either observation or 3 cycles of maintenance MVP chemotherapy. Until August 1991, 18 patients were registered to this study. 4 cases were stage IIIa and 14 were stage IIIb. Among 18 cases 2 were lost after 2 cycles of chemotherapy, and 46 were analyzed for this preliminary report. The response rate of induction chemotherapy was $62.5\%$ : partial response, $50\%$ and minimal response, $12.5\%$. Residual tumor of the one partial responder was completely disappeared after radiotherapy. Among 6 cases who were progressed during induction chemotherapy, 4 of them were also progressed after radiotherapy. All patients were tolerated BID radiotherapy without definite increase of acute complications, compared with conventional radiotherapy group. But at the time of this report, one patient expired in two month after the completion of the radiotherapy because of treatment related complication. Although the longer follow up is needed, authors are encouraged with higher response rate and acceptable toxicity of this treatment. Authors believe that this study is worthwhile to continue.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.318-330
• /
• 2009

A high heat flux test facility using a graphite heating panel was constructed and is presently in operation at Korea Atomic Energy Research Institute, which is called KoHLT-1. Its major purpose is to carry out a thermal cycle test to verify the integrity of a HIP (hot isostatic pressing) bonded Be mockups which were fabricated for developing HIP joining technology to bond different metals, i.e., Be-to-CuCrZr and CuCrZr-to-SS316L, for the ITER (International Thermonuclear Experimental Reactor) first wall. The KoHLT-1 consists of a graphite heating panel, a box-type test chamber with water-cooling jackets, an electrical DC power supply, a water-cooling system, an evacuation system, an He gas system, and some diagnostics, which are equipped in an authorized laboratory with a special ventilation system for the Be treatment. The graphite heater is placed between two mockups, and the gap distance between the heater and the mockup is adjusted to $2{\sim}3\;mm$. We designed and fabricated several graphite heating panels to have various heating areas depending on the tested mockups, and to have the electrical resistances of $0.2{\sim}0.5$ ohms during high temperature operation. The heater is connected to an electrical DC power supply of 100 V/400 A. The heat flux is easily controlled by the pre-programmed control system which consists of a personal computer and a multi function module. The heat fluxes on the two mockups are deduced from the flow rate and the coolant inlet/out temperatures by a calorimetric method. We have carried out the thermal cycle tests of various Be mockups, and the reliability of the KoHLT-1 for long time operation at a high heat flux was verified, and its broad applicability is promising.