• 제목/요약/키워드: In2O3

검색결과 30,479건 처리시간 0.058초

$In_2O_3$계 반도성 가스감지재료의 조성변화에 따른 감도특성 (Sensitivity Characteristics on the Composition Change of the Gas Sensing Materials based on $In_2O_3$ Semiconductor.)

  • 정형진;유광수
    • 한국세라믹학회지
    • /
    • 제22권4호
    • /
    • pp.54-60
    • /
    • 1985
  • Gas sensing materials for detecting flammable gases such as $CH_4$, $C_3H_8$ and n-$C_4H_{10}$ were developed by util-izing $In_2O_3$ as the principal sensing material. The sensing materials were formulated by mixing $In_2O_3$ powder with one or two other chemicals such as $SnO_2$, $Y_2O_3$ and $Al_2O_3$ with a small addition of $PdCl_2$ as a catalyst. Sample of sensor were fabricated by coating each of the mixtures on a ceramic tube impregnating ethylsili-cate and firing at 75$0^{\circ}C$ Each material mixture was evaluated by measuring and comparing gas sensitivity(resistance in air/resistance with gas) to flammable gases such as $CH_4$, $C_3H-8$ and n-$C_4H_{10}$. It was found that among fifteen compositions tested three compositions as follows show the highest gas sensitivity and thus are very feasible for commercialization as the gas sensors ; o49.5 $In_2O_3$+50 Al2O3_0.5 PdCl2(wt%) o $20In_2O_3+29$ $SnO_2+50$ $Al_2O_3+1$ $PdCl_2$(wt%) o40 $In_2O_3$+9 $Y_2O_3+50$ $Al_2O_3+1$ $PdCl_2$(wt%)

  • PDF

ZnO 바리스터의 미세구조제어와 전기적 특성 (Electrical Characteristics and Microstructure Control of Zinc Oxide Viaristors)

  • 김경남;한상목
    • 한국재료학회지
    • /
    • 제1권2호
    • /
    • pp.65-70
    • /
    • 1991
  • $ZnO-Bi_2O_3-CoO-Sb_2O_3$$ZnO-Bi_2O_3-CoO-Sb_2O_3-Cr_2O_3$계에서 미세구조 변화 및 전기적 특성에 미치는 개재물의 영향을 조사하였다. 소결동안에 ZnO입자 성장은 스피넬 입자들에 의해 제어되었으며, 스피넬 입자들의 양의 증가에 의해 입자성장은 감소하였다. $Cr_2O_3(0.5mol\%)$의 첨가는 비직선성지수에는 큰 영향을 미치지 못하였으며 임계전압(breakdown voltage)을 증가시켰다. 계산에 의해 구한 장벽전압은 $ZnO-Bi_2O_3-CoO-Sb_2O_3$$ZnO-Bi_2O_3-CoO-Sb_2O_3-Cr_2O_3$ 계에서 각각 3.1V와 2.9V이었다.

  • PDF

Pb(In1/2Nb1/2)O3-PbTiO3계의 미세구조와 전기적 물성에 미치는 V2O5 첨가의 영향 (Effect of V2O5 Addition on the Microstructure and Electrical Properties of Pb(In1/2Nb1/2)O3-PbTiO3 Ceramics)

  • 박현욱;이응상
    • 한국세라믹학회지
    • /
    • 제25권4호
    • /
    • pp.335-340
    • /
    • 1988
  • The change in microstructure and the electrical properties of Pb(In1/2Nb1/2)O3-PbTiO3 Ceramics caused by V2O5 addition were studied. The results are ; 1. interability was increased because the mass transport through the second phase formed by V2O5 addition increased. 2. ith addition of V2O5, tetragonality and Curie temperature increased. The maximum value of kp was observed when 0.5wt% of V2O5 was added. 3. he second phase formed by V2O5 accelerated the grain growth, and existed in grain boundary. Electrical properties were changed by corelations between tetragonality and the amount of second phase.

  • PDF

Investigation of $xV_2O_5-B_2O_3$ and $xV_2O_5-B_2O_3-yNa_3O$ Glasses by $^{11}B MAS$ NMR

  • Kim, Sun-ha;Han, Oc-Hee;Kang, Jae-Pil
    • 한국자기공명학회논문지
    • /
    • 제9권1호
    • /
    • pp.61-66
    • /
    • 2005
  • $^{11}B MAS NMR$ spectra of binary glass system $xV_2O5-B_2O_3$ and ternary glass system $xV_2O5-B_2O_3-yNa_2O$ (x = $V_2O_5 mol%/$B_2O_3$ mol%, y = $Na_2O$ mol$/$B_2O_3$ mol%) were acquired. $BO_3$ units are dominant components in the spectra of $xV_2O_5-B_2O_3$glass systems while both $BO_3$ and $BO_4$ unit appear in comparable amounts in the spectra of $xV_2O_5-B_2O_3-yNa_2O$ glass systems. More $BO_3$ units were monitored for higher $V_2O_5$ contents while more $BO_4$ unit for higher $Na_2O$ contents. Quadrupole parameters such as $e^2qQ$ and $\eta$ obtained form spectral simulation indicate that $e^2qQ$ has a maximum value at x = y 1 and $\eta$ decreases and increases as x or y grows, respectively. Our results suggest that $V_2O_5$ and $Na_2O$ play opposite roles in the ternary glasses.

  • PDF

La2O3가 첨가된 Pd/TiO2 촉매의 개발 및 H2 상온산화 반응에서의 성능 향상 연구 (Development of Pd/TiO2 Catalysts with La2O3 Addition and Study on the Performance Improvement of H2 Oxidation at Room Temperature)

  • 이동윤;김성철;이상문;김성수
    • 공업화학
    • /
    • 제31권6호
    • /
    • pp.674-678
    • /
    • 2020
  • 본 연구에서는 상온 조건에서 추가적인 에너지원 없이 H2 산화가 가능한 Pd/TiO2 촉매를 제조하였고, 지지체인 TiO2의 비표면적은 Pd/TiO2 촉매의 H2 산화 반응 성능과 비례하지는 않은 것을 확인하였다. 또한 촉매의 물성 변화에 의한 성능 영향 평가를 위하여 La2O3를 Pd/TiO2 촉매에 첨가하였다. La2O3를 TiO2에 함량별로 첨가하여 Pd/La2O3-TiO2를 제조하였고, CO chemisorption 분석을 진행하였다. Pd/TiO2(G) 촉매의 전환율(14% at 0.5% H2)과 비교하여 Pd/La2O3-TiO2 촉매가 74% 전환율로 5배 이상의 성능 증진이 나타났다. Pd/La2O3-TiO2 촉매는 활성금속인 Pd의 metal dispersion이 클수록 H2 산화반응에 유리한 것으로 분석되었다. 하지만 첨가되는 La2O3가 10%를 초과하게 되면 촉매 성능이 다시 감소하는 것을 알 수 있었다. 마지막으로 Pd/La2O3-TiO2 촉매의 물성이 지배적인 영향을 미치는 것은 주입되는 H2가 0.3~0.5% 농도 조건까지이며, 1% 이상의 H2 농도부터는 물질전달이 촉매 반응속도를 지배하는 것으로 판단된다.

$BaO-(Nd, Sm)_2O_3-TiO_2$계 세라믹스의 상관계 및 마이크로파 유전특성 (Phase Relation and Microwave Dielectric Properties of $BaO-(Nd, Sm)_2O_3-TiO_2$ Ceramic System)

  • 김희도;김진호;조상희
    • 한국세라믹학회지
    • /
    • 제31권9호
    • /
    • pp.995-1004
    • /
    • 1994
  • Phase relation and microwave dielectric properties of the system BaO.(Nd1-xSmx)2O3.TiO2 (n=4, 5) were studied. With n=5 (1 : 1 : 5), Ba2Ti9O20 and TiO2 formed in case of X$\leq$0.7, and Ba2Ti9O20 and Sm2Ti2O7 formed at X=1.0 as the second phases dispersed in fine-grained orthorhombic matrix phase. With n=4 (1 : 1 : 4). on the contrary, only fine grains of an ortho-rhombic phase were observed irrespective of Nd/Sm ratio. The compositions of these two stable orthorombic phases having distinct lattic constants even with the same Nd/Sm ratio were estimated as 4BaO.5(Nd1-xSmx)2O3.18TiO2 and BaO.(Nd1-xSmx)2O3.4TiO2 with n=5 and n=4 in the system BaO.(Nd1-xSmx)2O3.TiO2, respectively. Consequently the composition BaO.(Nd1-xSmx)2O3.5TiO2 lies in the compatible triangle of 4BaO.5(Nd1-xSmx)2O3.18TiO2 and the second phases mentioned above. The microwave dielectric properties (~4 GHz) of BaO.(Nd1-xSmx)2O3.5TiO2 can be controlled effectively by adjusting Sm content : with increasing X from 0 to 0.7, both dielectric constant and the temperature coefficient of resonant frequency decreased monotonically from 82 to 65 and from 91 (ppm/$^{\circ}C$) to -19(ppm/$^{\circ}C$), respectively, while unloaded Q(Qo) remained constant at about 2,600.

  • PDF

X-선 광전자 분광법(XPS)을 이용한 $PbO-Bi_2O_3-Ga_2O_3$계 적외선 투과 유리의 구조해석 (Structural Investigation of Infrared Transmitting $PbO-Bi_2O_3-Ga_2O_3$ Glasses by X-ray Photoelectron Spectroscopy)

  • 허종;김춘곤;김유성
    • 한국세라믹학회지
    • /
    • 제30권11호
    • /
    • pp.911-918
    • /
    • 1993
  • X-ray photoelectron spectroscopy(XPS) has been empolyed to investigate the structure of PbO-Bi2O3-Ga2O3 glasses. XPS OIS spectra recorded from binary PbO-Ga2O3 glasses clearly showed the presence of two peacks due to bridging and non-bridging oxygens, respectively. Gaussin best-fit deconvolution of the OIS peaks suggested there are substaintial amount of non-bridging oxygens in the structure. Therefore, in addition to the glassforming and charge compensating roles of PbO as suggested from the previous works, role of PbO as network modifiers needs to be considered. Addition of Bi2O3 to binary glasses resulted in the rapid decrease in the amount of non-bridging oxygens as well as in values of FWHM (Full Width at the Half Maximum intensity). It is believed that Bi2O3 form distorted BiO6 octahedra and therefore, work as intermediates. Infrared spectra also suggested that Ga2O3 behave as network-formers in the form of GaO4- tetrahedra.

  • PDF

SHS법을 이용한 복합분말(Al2O3-SiC) 제조시 TiO2첨가의 영향 (The effect of the addition of TiO2 in the preparation of (Al2O3-SiC)- SiC composite powder by SHS Process)

  • 윤기석;양범석;이종현;원창환
    • 한국재료학회지
    • /
    • 제12권1호
    • /
    • pp.48-53
    • /
    • 2002
  • $Al_2O_3-SiC$ and $Al_2O_3-SiC$-TiC composite powders were prepared by SHS process using $SiO_2,\;TiO_2$, Al and C as raw materials. Aluminum powder was used as reducing agent of $SiO_2,\;TiO_2$ and activated charcoal was used as carbon source. In the preparations of $Al_2O_3-SiC$, the effect of the molar ratio in raw materials, compaction pressure, preheating temperature and atmosphere were investigated. The most important variable affecting the synthesis of $Al_2O_3-SiC$ was the molar ratio of carbon. Unreactants remained in the product among all conditions without compaction. The optimum condition in this reaction was $SiO_2$: Al: C=3: 5: 5.5, 80MPa compaction pressure under Preheating of $400^{\circ}C$ with Ar atmosphere. However there remains cabon in the optimum condition. The effect of $TiO_2$ as additive was investigated in the preparations of $Al_2O_3-SiC$. As a result of $TiO_2$ addition, $Al_2O_3-SiC$-TiC composite powder was prepared. The $Al_2O_3$ powder showed an angular type with 8 to $15{\mu}m$, and the particle size of SiC powder were 5~$10{\mu}m$ and TiC powder were 2 to $5{\mu}m$.

${\gamma}$-$6Bi_2O_3$.$SiO_2$ 결정을 포함하는 복합다결정체의 작성 (Preparation of Composite Polycrystals Including ${\gamma}$-$6Bi_2O_3$.$SiO_2$)

  • 김호건
    • 한국세라믹학회지
    • /
    • 제23권2호
    • /
    • pp.13-20
    • /
    • 1986
  • Composite polycrystals including ${\gamma}$-$6Bi_2O_3$.$SiO_2$ crystal which have needlelike regular structure are useful for the high resolution optical devices. For the purpose of obtaining the composite polycrystals described above the melts of eutectic composition in the three eutectic systems including $6Bi_2O_3$.$SiO_2$ composition were unidirectionally solidified at a rate of 0.05 and 0.25 cm/h under a thermal gradient of 10$0^{\circ}C$/m. Composite polycrystals of relatively regular structure in which needlelike ${\gamma}$-$6Bi_2O_3$.$SiO_2$ crystals were arrayed in parallel with $2Bi_2O_3$.$B_2O_3$ crystal matrix were obtained when the eutectic melt of $6Bi_2O_3$.$SiO_2 -2Bi_2O_3$.$B_2O_3$ system was solidified at a rate of 0.25 cm/h. Partial structural irregularity however was found in the obtained composite polycrystals.

  • PDF

금속-유기 골격체 열분해를 통해 합성된 Co3O4/CoFe2O4 첨가 In2O3나노섬유를 이용한 고감도 고선택성 에탄올 센서 (Bimetallic Zeolitic Imidazolate Framework Derived Co3O4/CoFe2O4 Catalyst Loaded In2O3 Nanofibers for Highly Sensitive and Selective Ethanol Sensing)

  • 이수민;김태현;조영무;김기범;이종흔
    • 센서학회지
    • /
    • 제30권2호
    • /
    • pp.94-98
    • /
    • 2021
  • In this study, pure and Co3O4/CoFe2O4-loaded Indium oxide (In2O3) nanofibers were synthesized by the electrospinning of an Indium/Polyvinylpyrrolidone precursor solution containing cobalt and iron bimetallic zeolitic imidazolate frameworks and subsequent heat treatment. The ethanol, toluene, p-xylene, benzene, carbon monodxide, and hydrogen gas sensing characteristics of the solution were measured at 250-400 ℃. 0.5 at%-Co3O4/CoFe2O4-loaded In2O3 nanofibers exhibited extreme response (resistance ratio - 1) to 5 ppm of ethanol (210.5) at 250 ℃ and excellent selectivity over the interfering gases. In contrast, pure In2O3 nanofibers exhibited relatively low responses to all the analyte gases and low selectivity above 250-400 ℃. The superior response and selectivity toward ethanol is explained by the catalytic roles of Co3O4 and CoFe2O4 in gas sensing reaction and the electronic sensitization induced by the formation of p (Co3O4/CoFe2O4)-n (In2O3) junctions.