• 제목/요약/키워드: In-vehicle Network

검색결과 1,422건 처리시간 0.049초

CAN 통신을 이용한 차량 내 자동 온도조절 시스템 (In-Vehicle Auto temperature control System by CAN Network)

  • 김장주;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.90-93
    • /
    • 2009
  • 최근 차량용 네트워크 시스템으로 사용되고 있는 CAN(Controller Area Network)은 많은 ECU들이 필요한 미래형 스마트차량에 적합한 네트워크 프로토콜로서 안정성과 신뢰성을 보장해주며, 많은 ECU들의 장착으로 Wiring Harness의 공간과 중량이 늘어남으로 인해 발생되는 에너지 소비와 비용의 증가를 대폭 줄일 수 있는 것으로 나타났다. 본 논문에서는 CAN프로토콜을 이용하여 미래형 스마트 자동차에 요구되는 편의주행, 쾌적주행을 위해 Air conditioner 와 Heater를 제어하여 차량 내부 온도를 운전자의 요구에 맞도록 자동으로 제어할 수 있는 시스템을 구현하고자 한다.

  • PDF

중복 통신 채널을 가진 CAN 시스템에서 분산 메시지 할당 방법에 관한 연구 (A Study on Distributed Message Allocation Method of CAN System with Dual Communication Channels)

  • 김만호;이종갑;이석;이경창
    • 제어로봇시스템학회논문지
    • /
    • 제16권10호
    • /
    • pp.1018-1023
    • /
    • 2010
  • The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.

자동차 내부망 통신네트워크 해킹범죄예방을 위한 융합보안적 대응방안: Bluetooth 활용사례를 중심으로 (Convergence Security Approach for Motor Vehicle Communication Network Hacking Attack Prevention: Focus on Bluetooth Cases)

  • 최관;김민지
    • 융합보안논문지
    • /
    • 제16권6_2호
    • /
    • pp.99-107
    • /
    • 2016
  • 이 연구의 목적은 Bluetooth를 활용한 자동차의 내부망 통신네트워크를 해킹공격으로부터 예방하기 위한 대응방안을 제시하기 위함이다. 이를 위해 2장에서는 자동차 통신네트워크의 정의와 내부망 통신네트워크의 종류에 대해서 살펴보았다. 3장에서는 자동차 내부망 통신네트워크 해킹위험성을 분석하기 위해 Bluetooth에 의한 해킹범죄사례를 살펴보았다. 4장에서는 본 연구의 결과로서 첫째, "자동차안전기준에 관한 규칙" 개정이 이루어져야 한다. 동법에서는 전자제어시스템의 정의 및 기준사항과 안전운행을 위한 제작 및 정비를 규정해 놓았음에도 불구하고 전자제어시스템을 대상으로 한 해킹범죄 예방 및 방어와 관련된 보안프로그램 혹은 펌웨어 등의 제작과 관련된 규정이 없는 실정이다. 둘째, 자동차의 전자제어시스템 기술의 복잡성에 기인된 자동차 통신네트워크를 보호하고자 자동차 통신네트워크 보호 법률이 신설되어야 한다.

Temporal matching prior network for vehicle license plate detection and recognition in videos

  • Yoo, Seok Bong;Han, Mikyong
    • ETRI Journal
    • /
    • 제42권3호
    • /
    • pp.411-419
    • /
    • 2020
  • In real-world intelligent transportation systems, accuracy in vehicle license plate detection and recognition is considered quite critical. Many algorithms have been proposed for still images, but their accuracy on actual videos is not satisfactory. This stems from several problematic conditions in videos, such as vehicle motion blur, variety in viewpoints, outliers, and the lack of publicly available video datasets. In this study, we focus on these challenges and propose a license plate detection and recognition scheme for videos based on a temporal matching prior network. Specifically, to improve the robustness of detection and recognition accuracy in the presence of motion blur and outliers, forward and bidirectional matching priors between consecutive frames are properly combined with layer structures specifically designed for plate detection. We also built our own video dataset for the deep training of the proposed network. During network training, we perform data augmentation based on image rotation to increase robustness regarding the various viewpoints in videos.

퍼지-뉴럴 제어기법에 의한 궤도차량의 동적 제어 (Dynamic Control of Track Vehicle Using Fuzzy-Neural Control Method)

  • 한성현;서운학;조길수;윤강섭
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 춘계학술대회 논문집
    • /
    • pp.133-139
    • /
    • 1997
  • This paper presents a new approach to the dynamic control technique for track vehicle system using neural network-fuzzy control method. The proposed control scheme uses a Gaussian function as a unit function in the neural network-fuzzy, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. It is propored a learning controller consisting of two neural network-fuzzy based on independent resoning and a connection net with fixed weights to simply the neural network-fuzzy. The performance of the proposed controller is shown by simulation for trajectory tracking of the speed and azimuth of a track vehicle

  • PDF

자기저항 센서를 이용한 지능형 자율주행 전기자동차의 신경회로망 조향 제어기 개발 (Development of the Neural Network Steering Controller based on Magneto-Resistive Sensor of Intelligent Autonomous Electric Vehicle)

  • 김태곤;손석준;유영재;김의선;임영철;이주상
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.196-196
    • /
    • 2000
  • This paper describes a lateral guidance system of an autonomous vehicle, using a neural network model of magneto-resistive sensor and magnetic fields. The model equation was compared with experimental sensing data. We found that the experimental result has a negligible difference from the modeling equation result. We verified that the modeling equation can be used in simulations. As the neural network controller acquires magnetic field values(B$\_$x/, B$\_$y/, B$\_$z/) from the three-axis, the controller outputs a steering angle. The controller uses the back-propagation algorithms of neural network. The learning pattern acquisition was obtained using computer simulation, which is more exact than human driving. The simulation program was developed in order to verify the acquisition of the teaming pattern, teaming itself, and the adequacy of the design controller. The performance of the controller can be verified through simulation. The real autonomous electric vehicle using neural network controller verified good results.

  • PDF

궤도차량의 지능제어 및 3D 시률레이터 개발 (Development of a 3D Simulator and Intelligent Control of Track Vehicle)

  • 장영희;신행봉;정동연;서운학;한성현;고희석
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
    • /
    • pp.107-111
    • /
    • 1998
  • This paper presents a now approach to the design of intelligent contorl system for track vehicle system using fuzzy logic based on neural network. The proposed control scheme uses a Gaussian function as a unit function in the neural network-fuzzy, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. Moreover, We develop a Windows 95 version dynamic simulator which can simulate a track vehicle model in 3D graphics space. It is proposed a learning controller consisting of two neural network-fuzzy based of independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The dynamic simulator for track vehicle is developed by Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D Graphics. The performance of the proposed controller is illustrated by simulation for trajectory tracking of track vehicle speed.

  • PDF

Artificial neural network for safety information dissemination in vehicle-to-internet networks

  • Ramesh B. Koti;Mahabaleshwar S. Kakkasageri;Rajani S. Pujar
    • ETRI Journal
    • /
    • 제45권6호
    • /
    • pp.1065-1078
    • /
    • 2023
  • In vehicular networks, diverse safety information can be shared among vehicles through internet connections. In vehicle-to-internet communications, vehicles on the road are wirelessly connected to different cloud networks, thereby accelerating safety information exchange. Onboard sensors acquire traffic-related information, and reliable intermediate nodes and network services, such as navigational facilities, allow to transmit safety information to distant target vehicles and stations. Using vehicle-to-network communications, we minimize delays and achieve high accuracy through consistent connectivity links. Our proposed approach uses intermediate nodes with two-hop separation to forward information. Target vehicle detection and routing of safety information are performed using machine learning algorithms. Compared with existing vehicle-to-internet solutions, our approach provides substantial improvements by reducing latency, packet drop, and overhead.

차량 네트워크 통신용 보안 모듈 (A Security Module for Vehicle Network Communication)

  • 권병헌;박진성
    • 디지털콘텐츠학회 논문지
    • /
    • 제8권3호
    • /
    • pp.371-376
    • /
    • 2007
  • 차량 내부에서는 컨트롤러, 센서, 텔레매틱스 단말기, 내비게이션, 오디오 및 비디오 등 다양한 모듈들이 CAN이나 MOST와 같은 차량 네트워크를 통해 연결되어 있다. 게다가, 사용자는 이동 중에 무선 모바일 네트워크를 이용하여 ITS나 인터넷에 접속할 수도 있다. 이러한 네트워크의 다양한 활용은 데이터 해킹, 프라이버시 침해, 위치 추적 등과 같은 많은 보안 문제를 야기하게 된다. 또한, 차량 운영 데이터(센서, 제어 데이터)를 해킹함으로써 차량을 고장 내거나 사고를 유발할 수 있는 가능성도 점차 커지고 있다. 본 논문에서는 CAN이나 MOST와 같은 차량 네트워크에 적용할 수 있는 암호화 기능을 가지는 보안 모듈을 제안한다. 이 보안 모듈은 DES, 3-DES, SEED, ECC 및 RSA와 같은 일반적인 암호화 알고리듬과 전자서명 기능을 제공하게 된다.

  • PDF

고속전철 차량간 구성변화의 능동적 적응을 위한 통신규약에 관한 연구 (A study on adaptable configuration protocol for high speed electric railway vehicles)

  • 한재문;박재현
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(III)
    • /
    • pp.204-209
    • /
    • 2003
  • Recently, The TCN(Train Communication Network} as the distributed control systems for electric vehicles, which is the international standard of the intra vehicle communication, actively recognizes variations and supports reconfiguration of the train network when a vehicle is separated or recombined. The technique of reconfiguration to take variety and interoperability of a vehicle constitution is used when the vehicle constitution is changed. At the time, each node making up vehicle network shares the information about the variation of vehicle constitutions and the state of nodes. In the hierarchical TCN structure, an exchange of data becomes available as a work to transmit information between components is performed at the node playing a role of gateway. This paper proposes a protocol to transmit the information of the train reconfiguration. The protocol gives an application to renew a list for transmitting information and to perform the transmission that can guarantee periodic and non-periodic data transmission between nodes when the network nodes changed by a variation of the network state are reconfigured. If use this protocol, can use functions that are offered in the electric railcar at the same time that composition of vehicles is completed without delay. And when driver of the electric railcar inspect before running of vehicles, can confirm state of vehicles visually through monitor in driver's room.

  • PDF